Search results

From GlueXWiki
Jump to: navigation, search

Page title matches

  • == Revised Draft GlueX By-law on Shift-taking [[(revised version as of 4-25-2014)]] == ...concerned with experimental data-taking. It does not deal with specialized shift-taking concerned with a particular detector or software element, nor with any othe
    5 KB (842 words) - 18:21, 2 May 2014
  • 0 B (0 words) - 08:47, 23 June 2015

Page text matches

  • *[[Draft By-law on Shift-taking | Draft By-law on Shift-taking]] Please [[Special:Userlogin|log in]] or [[Registering on the Wiki|register]] to add content.<br>
    10 KB (1,470 words) - 16:57, 28 March 2024
  • The DAQ system is generally kept running on the clon03 display(s) in the Hall-B counting house. Check first if it is th To kill the current DAQ processes, ssh into the ''halldrun'' account on clonxt2 and type "kill_daq". This will kill most of the DAQ processes, but
    16 KB (2,552 words) - 15:46, 1 October 2015
  • ...minimum photon energies needed for these tests. The module will be mounted on a support system in the Hall-B alcove area. The module will be illuminated ...s) and the support carriage weighs an additional 550 kg. The former rests on top of the latter and both are supported by a cart that has a motorized, co
    40 KB (6,903 words) - 11:09, 31 March 2015
  • ...ess the configuration used for a given run (which detectors were connected/on/off, trigger configuration, did the DAQ crash or did the data get written t ** Make png(?) files of important histograms on disk (hit occupancies, calibration plots, reconstructed track p vs. &theta;
    6 KB (859 words) - 06:22, 1 April 2015
  • ** Daily run meetings broadcasted on Bluejeans will occur at 8:45am in the counting house conference room. The R ...μm Al foils, and one 100 μm Al foil with a holed 10 μm Al foil pressed on it (3mm hole)).-->
    14 KB (2,187 words) - 16:28, 26 November 2018
  • #** SiPMPlus on green fibers [https://halldweb.jlab.org/doc-private/DocDB/ShowDocument?doci ...ns on consistency among Regina reports. Technical note coming from Regina on pedestal issue: positive overshoot of signal causes shift. All these are n
    2 KB (336 words) - 17:13, 24 February 2017
  • * [[Media:Online_Wolin_Mar_2009.pptx|Update]] on controls - Elliott Gerard called in to give a status report on FADC125 development.
    3 KB (508 words) - 17:14, 24 February 2017
  • ...ed in the directory <code>/group/halld/www/halldweb/html/talks/2015</code> on the JLab CUE. This directory is accessible from the web at https://halldweb #* Sean gave an update on the calibration challenge. He has been debugging batch jobs, and has made
    7 KB (1,131 words) - 17:13, 24 February 2017
  • ...ixed (in the lab). The degree of polarization of the coherent peak depends on the ratio of the photon energy to the end-point energy. ...symmetry &Sigma; for &pi;<sup>+</sup> and &pi;<sup>0</sup> photoproduction on the proton for photon energies from 1.102 to 1.862 GeV</i>, M. Dugger <i>et
    10 KB (1,589 words) - 22:38, 29 June 2015
  • to get up to speed on all things Hall D and all things FDC as we move - Beni will be focussing his efforts on the CDC, however, he will still
    11 KB (1,872 words) - 17:13, 24 February 2017
  • - We did some baseline pressure measurements on a single protootype layer. leak checking and pressure measurements tomorrow. Depending on what we
    8 KB (1,282 words) - 17:13, 24 February 2017
  • ## tagger harp scan shows sigma_x = 1.2 mm, sigma_y = 0.5 mm, optics on call will take a look ## Fast Feed-Back turned on and working...
    4 KB (595 words) - 23:00, 6 April 2016
  • ...halldweb.jlab.org/rcdb/runs/info/10293 10293] || x || Beam tuning. Working on SC timing (empty target? blocking collimator? no radiator?) ...rcdb/runs/info/10726 10726] || &#10003; || PARA orientation (shows UNKNOWN on the GUI) [https://logbooks.jlab.org/entry/3387672 log] [doublecheck]
    57 KB (7,278 words) - 21:41, 15 June 2016
  • ...ed in the directory <code>/group/halld/www/halldweb/html/talks/2016</code> on the JLab CUE. This directory is accessible from the web at https://halldweb Beni has been working on the calibration system.
    3 KB (432 words) - 19:45, 20 April 2016
  • ...ne code base, ...?) This will include how the single events will be passed on to the CODA 3 Event Recorder for writing to disk/tape. ...ing house, the experimental hall, and via a remote, secure connection (for on-call maintenance) will be required. How that will be done while minimizing
    29 KB (4,344 words) - 17:12, 24 February 2017
  • *# Decide on proper form of energy correction and recalibrate BCAL [https://halldweb.jla *# Check on status of SiPM cross-talk/after pulse separation (David)
    5 KB (789 words) - 17:08, 24 February 2017
  • ...in the directory <code>/group/halld/www/halldweb/html/talks/2011-2Q</code> on the JLab CUE. This directory is accessible from the web at https://halldweb * Five hundred Gauss on the cold head is maximum according to the manufacturer. Is this OK?
    4 KB (564 words) - 20:36, 31 March 2015
  • ...up is to determine the effect that summing multiple SiPM signals will have on the ultimate energy and timing resolutions. ...CAL channels would be read out. This threshold was calculated based purely on the dark hit rate for a single SiPM, assuming every SiPM would have a dedic
    8 KB (1,330 words) - 17:12, 24 February 2017
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    5 KB (833 words) - 12:39, 14 March 2017
  • ...iving, but tuning to 4R will not resume before Friday (i.e. accelerator is on schedule so no tuning work needed over holiday) # Report on Work in the Hall:
    1 KB (190 words) - 08:24, 1 December 2015
  • ...minute, we did not appreciate that this was what was being shown. (This is on slide 5 labeled "Tmax/2") ** After some discussion on this, the group agreed that if it really was no more effort, then we should
    3 KB (544 words) - 16:52, 24 February 2017
  • ## LED system on Mini BCAL ## Update on [[BCAL Beam Tests 2012]]
    8 KB (1,196 words) - 18:34, 17 July 2012
  • ...in the directory <code>/group/halld/www/halldweb/html/talks/2012-3Q</code> on the JLab CUE. This directory is accessible from the web at https://halldweb * Data Challenge Meetings have started on alternate Mondays at 1:30 pm.
    4 KB (636 words) - 11:11, 31 March 2015
  • ...the first three cells that will go in package #1. Chris put the resistors on one PCB set and Casey started today making the PCB ring for wire frame #28. ...us for two months, October and November. Dave and Anatoly will still work on the FDC. In case we need somebody for a short time, like half a shift, we s
    4 KB (757 words) - 00:55, 1 April 2015
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    7 KB (995 words) - 13:59, 30 November 2017
  • .... Anatoly is refurbishing the cathodes for package #2. He removed the foil on four cathodes and started the fifth. We decided to stop the refurbishment u ...tested all of them strip by strip. Initially there was some discoloration on the copper and some wrinkles from the wheels of the machine, but they fixed
    4 KB (745 words) - 18:02, 31 March 2015
  • ...omes the polishing of those sides and re-measurement but our technician is on strike, so we have to wait. #* Otherwise sorting of BCAL LED's goes on and the BCAL bare Control Boards have arrived in Gva as well.
    7 KB (1,211 words) - 08:40, 21 November 2012
  • ...ed in the directory <code>/group/halld/www/halldweb/html/talks/2016</code> on the JLab CUE. This directory is accessible from the web at https://halldweb #* Offline monitoring running on incoming data
    9 KB (1,509 words) - 19:08, 24 February 2016
  • * On the spreadsheet, enter "Y" in the "Overall Quality" field if all monitoring * Set run status in RCDB based on monitoring results
    33 KB (4,869 words) - 09:46, 26 March 2024
  • The field map linked below was created by Yang Guangliang (Glasgow, UK) on January 15, 2013. The current in the coils has been adjusted to give a cen ...ole_tosca_map_coordinates|drawing that illustrates the coordinate system]] on which the map grid is based.
    5 KB (749 words) - 21:19, 18 August 2014
  • Here is an e-mail that Andrei Semenov sent around to a select group on Mar. 18, 2013 describing a plan for timing calibration of the BCAL. 1. On event-by-event basis, you form the difference dt0=(t_up-t_do), fill
    3 KB (466 words) - 14:46, 31 March 2015
  • * Update on FCAL dark room - Dan, John, Manuel * Update on PLC test stand - Dave
    2 KB (356 words) - 10:53, 31 March 2015
  • On May 1st, 2013 an effort was made to map the solenoid. One set of points was The source code, binaries, and instructions on calculating the field can also be found in the subversion repository here (
    4 KB (632 words) - 16:39, 9 May 2013
  • ...fill by the end of that week. The talk will be in the Calorimetry Session on Tuesday June 4. ...to the inner 6cm of the calorimeter. The effect is not due to X0. "Wave on lake analogy by Dave: at the impact point much disturbance but circular wav
    3 KB (484 words) - 10:34, 31 March 2015
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    7 KB (1,084 words) - 12:39, 14 March 2017
  • ** Ed to talk more on FPGA programming ...e web pages you can drill down from an area in the hall to get information on a specific module. He will move the documentation and other fields to the
    5 KB (742 words) - 02:09, 1 April 2015
  • ...xis hall probe was calibrated relative to an NMR probe. These were all one on the center line at the point of the field where it was maximized (so that t ...though it may indicate some misalignment or shift of the last coil.) Based on this, a correction of cos(8 mrad) was applied to the other plots below.
    5 KB (924 words) - 10:10, 12 August 2013
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    8 KB (1,246 words) - 13:57, 7 April 2016
  • #*Machine tuning has been going on smoothly before and after thanksgiving. Rougher night at less than 50% up t ...m to Hall D is still planned for Dec. 7th, with Hall D beam setup starting on the 6th. It will start with beam in the tagger only for fast feedback commi
    4 KB (591 words) - 08:18, 8 December 2015
  • ...l inside BCAL, but the side rails have not been touched. Additional plates on the bottom of all the carts had to be installed to prevent the carts from t ...ht racks). The cooling system will be at the downstream side of the magnet on the floor. We discussed if the cooling system and the solenoid valves in th
    6 KB (1,052 words) - 00:08, 1 April 2015
  • ...ed in the directory <code>/group/halld/www/halldweb/html/talks/2016</code> on the JLab CUE. This directory is accessible from the web at https://halldweb The schedule still had beam for Hall D starting on November 9.
    4 KB (672 words) - 18:51, 18 October 2016
  • 4.) More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail *Turn polycon on if necessary (do it before turning the computer on)
    22 KB (3,414 words) - 16:27, 26 November 2018
  • ...estions for topics within each group. The working group chairs should work on adding the relevant talks with an estimated time (including questions) and # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    10 KB (1,231 words) - 12:38, 14 March 2017
  • #* '''NO PARKING ON SOUTH OR NORTH SIDE OF ROAD''' #* Trigger Studies - '''NO PARKING ON SOUTH SIDE OF ROAD'''
    7 KB (1,008 words) - 08:43, 18 April 2016
  • * Nerses is working on the [[Alarms for voltages (Nerses) | scheme to generate alarms for voltages ...n to have an alarm when the voltages are set to be off, but they are still on,
    3 KB (527 words) - 11:36, 10 April 2014
  • # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail #* Simon presented updated results on drift chamber alignment
    5 KB (710 words) - 20:00, 16 April 2014
  • When ls is used directly on a table name, it gives data versions (as vers command): - When used on single table name, gives table data version as 'vers <table name>' command
    9 KB (1,485 words) - 16:58, 9 May 2014
  • # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail * New detector-specific accounts have been created on gluon cluster
    4 KB (652 words) - 06:29, 1 April 2015
  • ...concerned with experimental data-taking. It does not deal with specialized shift-taking concerned with a particular detector or software element, nor with any othe ...taking his or her first-ever scheduled shift, a person must be an observer on at least one shift in order to become familiar with procedures and (typical
    9 KB (1,414 words) - 12:02, 2 May 2014
  • == Revised Draft GlueX By-law on Shift-taking [[(revised version as of 4-25-2014)]] == ...concerned with experimental data-taking. It does not deal with specialized shift-taking concerned with a particular detector or software element, nor with any othe
    5 KB (842 words) - 18:21, 2 May 2014
  • # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail ## There was discussion on whether the "shower curvature" is one of the first priorities. AS mentione
    4 KB (556 words) - 12:39, 14 March 2017
  • ...lyses show that, to have ODH-0 in the gas room, we need orifices of 0.052" on both Ar and CO2 input lines outside of the room. - Using the mini-DAQ readout with only the LV on, Mike started looking at the pedestals and working with Nick to identify an
    4 KB (686 words) - 06:05, 1 April 2015
  • system on and off. Control and monitoring of the system is accomplished using the Hal This includes the forty-eight temperature readings of each RTD on the cooling plates, which are in thermal contact with the back of the MPPC
    5 KB (834 words) - 07:36, 21 May 2014
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    5 KB (812 words) - 11:37, 6 June 2014
  • ...in the directory <code>/group/halld/www/halldweb/html/talks/2014-2Q</code> on the JLab CUE. This directory is accessible from the web at https://halldweb * The 50 scintillators are on their way to FIU from McNeal. They should arrive later today.
    4 KB (715 words) - 07:03, 1 April 2015
  • ...ak from the relief valve on top of the FDC mixing tank. Same valve is used on the CDC tank but it has not been checked. Narciso is looking for better val - On Tuesday ~6pm there was again a failure of the FDC gas control box in the ga
    4 KB (752 words) - 06:05, 1 April 2015
  • .... However, as it turned out after the meeting, he also followed the cables on the back of the box and swapped them too, in result the gas mixture didn't ...rmocouples, but where? Fernando: it is not practical to have them directly on the pre-amps (there are no cooling brackets in the CDC), but next to it to
    5 KB (829 words) - 04:15, 1 April 2015
  • ...in the directory <code>/group/halld/www/halldweb/html/talks/2014-3Q</code> on the JLab CUE. This directory is accessible from the web at https://halldweb Tomorrow, FIU will do a test assembly of the counters on the support structure. After that they will have a clearer picture of the c
    3 KB (510 words) - 06:45, 1 April 2015
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    5 KB (758 words) - 11:09, 22 August 2014
  • ...vacuum chamber. We added a 135 offset to the Hall probe field to have it on the same plot). ...not have wait for the thermal equilibrium to be fully reached. This is why on the bottom left plot, the last measured point at 36.5 degree does not align
    2 KB (405 words) - 12:40, 14 March 2017
  • ...in the directory <code>/group/halld/www/halldweb/html/talks/2014-3Q</code> on the JLab CUE. This directory is accessible from the web at https://halldweb In the context of Ryan's presentation on multi-pion final states, Matt commented that he, Ryan, and Paul did a detai
    6 KB (934 words) - 11:35, 31 March 2015
  • ...in the directory <code>/group/halld/www/halldweb/html/talks/2014-3Q</code> on the JLab CUE. This directory is accessible from the web at https://halldweb We reviewed the agenda Mark posted on the [[GlueX-Collaboration-Oct-2014|collaboration meeting page]]. It looks l
    7 KB (1,120 words) - 06:17, 1 April 2015
  • ...running for a first time with sparsification in mode 1 (almost three days on gluon49), and today started also mode 8. The data make sense, Mike also loo ...e limits in the controls. Several CDC channels are questionable, will work on them.
    2 KB (398 words) - 06:05, 1 April 2015
  • ...in the directory <code>/group/halld/www/halldweb/html/talks/2014-3Q</code> on the JLab CUE. This directory is accessible from the web at https://halldweb * Aristeidis continues work on the event display. He is now working on the TOF library, adjusting constants in the code, for example the time wind
    4 KB (599 words) - 04:01, 1 April 2015
  • ...//www.jlab.org/Hall-D/software/HDSoftware_Documentation/ doxygen generated on-line documentation] * data transfer and storage on the silo
    6 KB (847 words) - 22:22, 31 March 2015
  • # Report on Work in the Hall: #* <span style="color:blue">Halo Counters</span> : The one on the platform has been be put back. Others are good but there is a question
    4 KB (605 words) - 08:38, 8 December 2015
  • ...on connection all microphones are automatically muted. To unmute your mike on a Polycom or equivalent unit, enter *4 # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    7 KB (1,069 words) - 06:51, 1 April 2015
  • # Update on Photon Commissioning (Alexandre) #* Final documentation on the completion of items needed for Javier.
    4 KB (648 words) - 10:48, 17 October 2014
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    6 KB (982 words) - 06:35, 1 April 2015
  • ...in the directory <code>/group/halld/www/halldweb/html/talks/2014-4Q</code> on the JLab CUE. This directory is accessible from the web at https://halldweb ...effective_time_cut|100-ns-Shift/effective-time-cut issue]] by adding a cut on the maximum time that will appear in the EVIO-formatted file. This emulates
    6 KB (833 words) - 06:39, 1 April 2015
  • # [[Proposal on CAEN TDC System Synchronization|TDC Timing Synchronization]] (all) # Responsibility for shift takers' instructions on the [https://halldweb.jlab.org/hdops/wiki hdops wiki] (and expert pages too
    5 KB (789 words) - 01:13, 1 April 2015
  • Comments on the solution: TDC board. That by itself should work, and will be a check on this
    3 KB (503 words) - 13:29, 3 November 2014
  • ...on connection all microphones are automatically muted. To unmute your mike on a Polycom or equivalent unit, enter *4 # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    7 KB (1,204 words) - 12:38, 14 March 2017
  • The meeting will be on Sunday November 30, 2014 at 4:00pm EDT. ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.<
    6 KB (967 words) - 17:13, 24 February 2017
  • 4.) More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail *Turn polycon on if necessary (do it before turning the computer on)
    16 KB (2,495 words) - 10:00, 19 March 2015
  • Calibration plugins and scripts are run on the data in the counting house as needed. ...on (e.g. run end-time, total # events, scalars, etc.). Instead, cron jobs on the online system periodically runs a script that crawls through the files
    3 KB (409 words) - 13:11, 11 February 2015
  • # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail ...size: Sergey F. asked about the possibility of increasing the buffer size on the ROC to something larger than 1MB since it may be needed for fADC125 in
    6 KB (955 words) - 05:58, 1 April 2015
  • # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail # Updates on:
    1 KB (170 words) - 14:28, 18 February 2016
  • - Mike is working on the CDC efficiency. CDC is ready for taking data with the BCAL cosmic trigg
    4 KB (588 words) - 04:15, 1 April 2015
  • # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail * Some discussion was had on various aspects of this type of information gathering including implication
    3 KB (531 words) - 06:45, 1 April 2015
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    8 KB (1,197 words) - 12:39, 14 March 2017
  • ...on connection all microphones are automatically muted. To unmute your mike on a Polycom or equivalent unit, enter *4 # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    7 KB (1,198 words) - 13:50, 26 March 2015
  • ...diators are on a wheel mounted on the goniometer inside the vacuum chamber on the beamline just before tagger. ...c. The gory details of the EPICS controls for the goniometer are explained on the XXX page.
    13 KB (2,009 words) - 17:40, 27 April 2015
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    4 KB (631 words) - 17:04, 24 February 2017
  • *# only consider paddles that have hits on both ends
    3 KB (560 words) - 14:32, 17 April 2015
  • * During analysis, detected tracks will "vote" on the beam bunch that caused the event, and then it's time can be used as an | The period of time between MO signals on the RF signal cable arriving from the accelerator.
    25 KB (4,205 words) - 14:37, 20 August 2018
  • # Improve on the monitoring the the data quality and the performance of the TOF. ...T minimum ionizing peaks to the same value. This requires HV changes based on the knowledge of the PMT gains.
    8 KB (1,400 words) - 08:57, 28 July 2015
  • ...on connection all microphones are automatically muted. To unmute your mike on a Polycom or equivalent unit, enter *4 # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    8 KB (1,328 words) - 11:20, 27 May 2015
  • This version is based on revision 18552 of ^trunk/sim-recon. Reverted back to previous configuration to work on debugging.
    46 KB (5,922 words) - 15:00, 3 June 2015
  • ...ed in the directory <code>/group/halld/www/halldweb/html/talks/2015</code> on the JLab CUE. This directory is accessible from the web at https://halldweb ...ch don't have some of the unusual features of his previous constants based on data taken last fall. He is checking them out in preparation for putting t
    5 KB (866 words) - 12:19, 17 June 2015
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    7 KB (974 words) - 17:12, 24 February 2017
  • ...ed in the directory <code>/group/halld/www/halldweb/html/talks/2015</code> on the JLab CUE. This directory is accessible from the web at https://halldweb #* Sean presented some preliminary numbers that he collected on how much more data is needed for a full, detailed calibration of all subdet
    6 KB (872 words) - 15:10, 23 September 2015
  • 4.) More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail *Turn polycon on if necessary (do it before turning the computer on)
    6 KB (985 words) - 09:32, 17 December 2015
  • ...ed in the directory <code>/group/halld/www/halldweb/html/talks/2016</code> on the JLab CUE. This directory is accessible from the web at https://halldweb ...ystem-based interface to the tape system. We have a total quota of 115 TB on the lustre disks, spread out among /cache, /volatile, and /work. Each disk
    6 KB (948 words) - 16:53, 24 February 2017
  • ...ed in the directory <code>/group/halld/www/halldweb/html/talks/2016</code> on the JLab CUE. This directory is accessible from the web at https://halldweb ...e had, 0.3 degrees down. (For comparison we had 0.6 degrees in Fall 2014.) On the upstream end the start counter is 3.4 mm above nominal.
    2 KB (375 words) - 15:24, 3 June 2016
  • ...on DIRC participants from Germany and Indiana. Justin will suggest 9:00am on Thursdays. Regardless, they will determine a time and communicate it to us * It was noted that Alex S. is working on more detailed L1 trigger emulation using data from the RCDB.
    5 KB (763 words) - 12:38, 14 March 2017
  • ...ed in the directory <code>/group/halld/www/halldweb/html/talks/2016</code> on the JLab CUE. This directory is accessible from the web at https://halldweb # We reviewed progress on calibrations for the last run group. The goal for these is to be finished
    7 KB (1,074 words) - 17:13, 24 February 2017
  • # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail 2*QDR CONNECT X3 (ONE MAY BE LANDED ON THE MOTHERBOARD, OR MAY USE DUAL PORT CARD)
    8 KB (1,275 words) - 17:11, 13 July 2016
  • ...ed in the directory <code>/group/halld/www/halldweb/html/talks/2016</code> on the JLab CUE. This directory is accessible from the web at https://halldweb There is a [https://bluejeans.com/s/a2@C/ recording of this meeting] on the BlueJeans site.
    3 KB (454 words) - 16:42, 28 July 2016
  • ...ed in the directory <code>/group/halld/www/halldweb/html/talks/2016</code> on the JLab CUE. This directory is accessible from the web at https://halldweb #* The latest monitoring run has finished, and the results are up on the web. These results include the updated FDC reconstruction and new EVIO
    9 KB (1,336 words) - 17:14, 24 February 2017
  • *Turn polycon on if necessary (do it before turning the computer on) *Turn the computer on if needed
    19 KB (2,918 words) - 16:30, 26 November 2018
  • *Turn polycon on if necessary (do it before turning the computer on) *Turn the computer on if needed
    21 KB (3,257 words) - 16:26, 26 November 2018
  • ...ed in the directory <code>/group/halld/www/halldweb/html/talks/2016</code> on the JLab CUE. This directory is accessible from the web at https://halldweb #* [[Policy on CCDB Variations for Reconstructing Simulated Data]]
    9 KB (1,411 words) - 17:13, 24 February 2017
  • The meeting will be on Monday September 26, 2016 at 2:00 pm EDT. # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    3 KB (408 words) - 16:07, 26 September 2016
  • The meeting will be on Monday November 7, 2016 at 2:00 pm EDT. # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    3 KB (428 words) - 17:14, 7 November 2016
  • * Here, the focus is more on understanding the systematics in the measurements than the physics itself.
    18 KB (2,251 words) - 14:12, 11 April 2017
  • The meeting will be on Wednesday January 18, 2017 at 11:15am EDT. ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.<
    3 KB (348 words) - 11:30, 18 January 2017
  • ...ed in the directory <code>/group/halld/www/halldweb/html/talks/2016</code> on the JLab CUE. This directory is accessible from the web at https://halldweb * The Hall closes on Friday.
    4 KB (628 words) - 14:29, 26 January 2017
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    6 KB (914 words) - 13:01, 9 February 2017
  • The meeting will be on Monday January 30, 2017 at 2:00 pm EDT. # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    4 KB (710 words) - 18:08, 30 January 2017
  • The meeting will be on Wednesday January 18, 2017 at 11:15am EDT. ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.<
    3 KB (348 words) - 14:20, 29 January 2017
  • #** Beam noise measurement on beam profiler with low current .... Temperature sensors tripped off the magnets. Suspected short in magnet on recovery, repaired with insulation.
    10 KB (1,363 words) - 10:23, 15 February 2017
  • ...ed in the directory <code>/group/halld/www/halldweb/html/talks/2016</code> on the JLab CUE. This directory is accessible from the web at https://halldweb ...ter source for these calibrations. As Mahmoud is on shift, Sean will work on obtaining some preliminary new timewalk/propogation time corrections today
    8 KB (1,204 words) - 17:04, 24 February 2017
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    7 KB (1,105 words) - 18:43, 23 February 2017
  • #** gluon01 hanging on shift checklist print [https://logbooks.jlab.org/entry/3461192] #*** Energy change in SL, failed controls on 2L21-6 (2 hrs 20 min) [https://logbooks.jlab.org/entry/3460784]
    13 KB (1,779 words) - 09:43, 22 February 2017
  • #*** Beam position lock on active collimator steered the beam away: 00:15 #* Alexandre on [[https://logbooks.jlab.org/entry/3463102 beam energy]]
    11 KB (1,454 words) - 09:42, 1 March 2017
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    11 KB (1,739 words) - 13:34, 9 March 2017
  • ...ed in the directory <code>/group/halld/www/halldweb/html/talks/2017</code> on the JLab CUE. This directory is accessible from the web at https://halldweb There is a [https://bluejeans.com/s/1kPQJ/ recording of this meeting] on the BlueJeans site. Use your JLab credentials.
    6 KB (992 words) - 18:28, 21 March 2017
  • ...[https://groups.google.com/forum/#!forum/gluex-software recent discussion on the Gluex Software Help List]. ...ed in the directory <code>/group/halld/www/halldweb/html/talks/2017</code> on the JLab CUE. This directory is accessible from the web at https://halldweb
    8 KB (1,184 words) - 18:53, 22 March 2017
  • ...ed in the directory <code>/group/halld/www/halldweb/html/talks/2017</code> on the JLab CUE. This directory is accessible from the web at https://halldweb There is a [https://bluejeans.com/s/7ITwj/ recording of this meeting] on the [https://jlab.bluejeans.com/ BlueJeans site].
    3 KB (474 words) - 13:19, 23 March 2017
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    8 KB (1,189 words) - 13:00, 6 April 2017
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    6 KB (923 words) - 12:34, 20 April 2017
  • ...sary systematic measurements before accelerator priority shifted to Hall C on March 6th. Data taking was reasonably productive, with beam available 109 Mar. 2) After re-establishing good beam delivery on the morning of the previous day, despite some monitoring/DAQ communication
    3 KB (403 words) - 15:11, 18 April 2017
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    7 KB (1,183 words) - 12:59, 4 May 2017
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    6 KB (1,051 words) - 13:01, 1 June 2017
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    7 KB (1,155 words) - 09:16, 1 August 2017
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    6 KB (946 words) - 11:24, 30 August 2017
  • ...ed in the directory <code>/group/halld/www/halldweb/html/talks/2017</code> on the JLab CUE. This directory is accessible from the web at https://halldweb There is a [https://bluejeans.com/s/EjILh/ recording of this meeting] on the BlueJeans site.
    3 KB (403 words) - 10:02, 25 October 2017
  • ::: (installed on FCAL crates) ::: (consider to install on some Hall-D crates, if successfully tested)
    2 KB (276 words) - 09:49, 2 October 2017
  • *Turn polycon on if necessary (do it before turning the computer on) *Turn the computer on if needed
    28 KB (4,381 words) - 16:26, 26 November 2018
  • :: - new version of SSP (Ben) Install on one FCAl crate ::: (installed on FCAL crates)
    2 KB (288 words) - 09:56, 30 October 2017
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    6 KB (932 words) - 17:21, 12 January 2018
  • #* Machine maintenance day - work on [https://logbooks.jlab.org/entry/3523200 FCAL], [https://logbooks.jlab.org/ #* Spent 1h40m on "Our - MCC - Our" harp scans due to beam trips, HV trips and "operator in [
    13 KB (1,919 words) - 12:14, 31 January 2018
  • #* Low intensity run: 100 nA on 1e-4 Al. radiator (2 hr) #* AD00 [https://logbooks.jlab.org/entry/3527994 still wandering], but effect on energy is very small.
    11 KB (1,569 words) - 09:43, 7 February 2018
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    6 KB (909 words) - 18:34, 8 February 2018
  • #* Accelerator is planning to have RF recovery on Tuesday #* [https://logbooks.jlab.org/entry/3533113 DAQ issue on start-up prior to GUI appearing, only occurred once]
    9 KB (1,313 words) - 07:59, 21 February 2018
  • ...ts), roc_reboot of rocPS1, error of wrong pedestal in rocPS1; FDC HV alarm on c2 hv4: reset and rebooted HV. [https://logbooks.jlab.org/entry/3542147] [C ....jlab.org/doc-private/DocDB/ShowDocument?docid=3563 Effect of cdc time cut on &rho; and &omega; reconstruction] [ST]
    9 KB (1,335 words) - 09:36, 7 March 2018
  • ** Accelerator: 5C11 beam oscillations. Still assessing effects on our detectors ** Routine daily HARP scans; feedback to MCC on beam focusing
    1 KB (196 words) - 17:57, 12 March 2018
  • ...ed in the directory <code>/group/halld/www/halldweb/html/talks/2018</code> on the JLab CUE. This directory is accessible from the web at https://halldweb There is a [https://bluejeans.com/s/5iWhS/ recording of this meeting] on the BlueJeans site. Use your JLab credentials.
    5 KB (725 words) - 13:28, 15 March 2018
  • ...accelerator had been unable to deliver high current to Hall C. Day shift on Thursday, February 8 was used to make the A and B beams collinear in the in
    947 B (158 words) - 07:08, 20 March 2018
  • ...ed in the directory <code>/group/halld/www/halldweb/html/talks/2018</code> on the JLab CUE. This directory is accessible from the web at https://halldweb There is a [https://bluejeans.com/s/zCEdu/ recording of this meeting] on the BlueJeans site. Use your JLab credentials.
    4 KB (635 words) - 14:54, 1 April 2018
  • ...a how-to page for the BTA sheet? (load from epics, edit etc & guidelines on ABU/BANU) #* Beam steering locks on 5C11B were off, there should be locks on 5C11B and the active collimator
    8 KB (1,284 words) - 10:35, 4 April 2018
  • ...was delivered. Aside for the fact that the beam would have been delivered on an opportunistic basis, the main issues were: Two RF separator vacuum problems (around 20th and on the 25th);
    3 KB (466 words) - 14:19, 29 March 2018
  • #* Beam issues off and on through Swing and Owl shifts #* Sensor failure in tagger dump on Sunday lost ~6.5hr
    7 KB (896 words) - 17:19, 11 April 2018
  • #* [https://logbooks.jlab.org/entry/3559446 New radiator on GEM TRD] #* [https://logbooks.jlab.org/entry/3559412 Shields installed on profiler]
    8 KB (1,222 words) - 08:42, 18 April 2018
  • ...Michael, Richard): denied by crew chief, considered too risky with Michael on vacation and Richard off-site #* RootSpy plots do not appear on plot browser (David informed, fixed)
    6 KB (855 words) - 08:43, 7 May 2018
  • * Documents from BaBar and transportation (on DocDB)
    3 KB (388 words) - 11:55, 3 August 2022
  • ...ould be developed in case installation and commissioning are not completed on time. ** MIT-Bates continues to provided updates weekly on optical box fabrication status.
    8 KB (1,167 words) - 17:58, 25 January 2019
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    9 KB (1,001 words) - 12:41, 12 July 2018
  • # [https://github.com/JeffersonLab/HDGeant4/issues Issues on GitHub] (all) ...h level comparisons of HDG3 vs. HDG4 with bggen not useful, too much going on
    2 KB (355 words) - 17:03, 7 July 2018
  • ...ed in the directory <code>/group/halld/www/halldweb/html/talks/2018</code> on the JLab CUE. This directory is accessible from the web at https://halldweb There is a [https://bluejeans.com/s/mDCze/ recording of this meeting] on the BlueJeans site. Use your JLab credentials.
    4 KB (707 words) - 17:12, 31 July 2018
  • # [https://github.com/JeffersonLab/HDGeant4/issues Issues on GitHub] (all) There is a [https://bluejeans.com/s/PCm4D/ recording of this meeting] on the BlueJeans site. Use your JLab credentials.
    3 KB (373 words) - 12:54, 21 July 2018
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    5 KB (825 words) - 12:31, 23 August 2018
  • # [https://github.com/JeffersonLab/HDGeant4/issues Issues on GitHub] (all) There is a [https://bluejeans.com/s/IGvQ6/ recording of this meeting] on the BlueJeans site. Use your JLab credentials.
    2 KB (384 words) - 16:09, 28 August 2018
  • *Turn polycon on if necessary (do it before turning the computer on) *Turn the computer on if needed
    24 KB (3,652 words) - 12:48, 12 December 2018
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    7 KB (1,113 words) - 18:21, 20 September 2018
  • #*could we improve the focus on the RH board camera? ...C run - on or after Wed (otherwise need access), plan to install converter on Tuesday
    5 KB (833 words) - 09:03, 27 September 2018
  • ...se with a "?". As before, I added some commentary that is hopefully useful on what to include/expect in the various presentations. ...software representatives will need to work with Graham to provide updates on the projections. All talks are plenary as that was the preference of the re
    8 KB (1,051 words) - 13:56, 7 March 2019
  • #*Troublesome and lengthy beam restoration on swing shift #*TAC run. How useful was it? What remains to be visited on this?
    7 KB (977 words) - 08:27, 10 October 2018
  • ...cs and the remaining hours when beam was available but not used were spent on configuration changes (8h), preparation for the diamond alignment and an ac ...good enough that MCC cancelled the RF recovery time planned for Tuesday. On Monday Mike McCaughan and Todd Satogata spent the entire day shift and part
    2 KB (326 words) - 17:34, 7 October 2018
  • #* Beam came back on swing shift. Smooth throughout the night #**[https://logbooks.jlab.org/entry/3609923 Log entry on beam convergence in Hall D]
    7 KB (1,102 words) - 08:37, 17 October 2018
  • #* FAC. Dev.: shifts on standby today 8am till tomorrow 16:00 #* DAQ, gluon04, No PS-trigger on display (DAQ-trigger ok!)
    6 KB (821 words) - 08:33, 24 October 2018
  • # [https://github.com/JeffersonLab/HDGeant4/issues Issues on GitHub] (all) There is a [https://bluejeans.com/s/V4hE7/ recording of this meeting] on the BlueJeans site. Use your JLab credentials.
    3 KB (525 words) - 13:04, 24 October 2018
  • We were scheduled for 152h of CW beam on target, but only received 80.6h (53%). Our ABU was at 78.2h (51%). The lost ...on. On Friday morning, it was decided that MCC would spend the day working on the accelerator with the hopes of delivering stable beam of the weekend. Th
    1 KB (237 words) - 09:23, 24 October 2018
  • ...#gid=1865737386 Trigger Spreadsheet] <font color="red">Started Filling out on 9/28/18</font> ...ttps://logbooks.jlab.org/entry/3621616 major alarm did not call mechanical on call phone]
    11 KB (1,688 words) - 10:45, 7 November 2018
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    8 KB (1,350 words) - 16:16, 15 November 2018
  • ##Thomas mentioned a TOF discussion when both he and Beni touched on the solutions used by LHCB and HERMES. Mark I. suggests a reprisal of the ...mentioned he had talked to Daniel L. over shift and had mentioned working on some BDT/MVA/NN solutions to PID.
    3 KB (551 words) - 11:54, 9 November 2018
  • ...c tuning unsuccessful: [https://logbooks.jlab.org/entry/3628637 background on our Harp scan 100 times larger] and some of the tagger radiation monitors h ...ce] (Alexandre D.). This is due to bad beam profile: The optimization done on Friday by Todd S. did not last:
    9 KB (1,262 words) - 05:07, 22 November 2018
  • #* On Dec 9 (Monday), the beam will be off at 6:00am. MCC will change energy to 1 # We have been taking Compton production data on LH2 target since midnight.
    4 KB (673 words) - 09:42, 12 December 2018
  • # Sasha changed the transceiver on a board in rocfcal10. ...an be raised without too much difficulty. He'll leave instructions with os on Friday.
    3 KB (440 words) - 09:51, 18 December 2018
  • *Turn polycon on if necessary (do it before turning the computer on) *Turn the computer on if needed
    27 KB (4,215 words) - 08:36, 10 April 2019
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    10 KB (1,554 words) - 16:30, 7 March 2019
  • ...ss for SSP issue. Sergei also looked at TOF RF problem, and Lubomir worked on TRD. #** Only ran on amo since last evening.
    4 KB (632 words) - 07:17, 21 March 2019
  • ...ue for some domestic institutions. At the present time the most relevant by-law reads: Another related by-law is the following:
    3 KB (489 words) - 09:30, 21 February 2019
  • ...warm empty target for few shifts, start cooldown over the weekend and fill on Sunday/Monday? #* Beam studies on Monday:
    6 KB (906 words) - 07:20, 21 March 2019
  • * Sasha and Drew will work on uploading CCAL Geometry into database * Sasha will try to unmask some channels tomorrow morning and also work on adding the ancillary triggers (e.g. CCAL only).
    1 KB (237 words) - 19:00, 7 March 2019
  • #* Beam fully restored on Friday 2pm #* CDC HV turned on Friday evening with nominal HV
    3 KB (453 words) - 07:21, 21 March 2019
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    7 KB (1,184 words) - 14:34, 21 March 2019
  • * Sasha and Drew will work on uploading CCAL Geometry into database * Sasha will try to unmask some channels tomorrow morning and also work on adding the ancillary triggers (e.g. CCAL only).
    1 KB (237 words) - 18:56, 22 March 2019
  • #* Return to regular schedule of beam studies on Monday and RF recovery on Tuesday. #** Do we want to refill target? Or are more statistics needed on empty target?
    6 KB (966 words) - 07:22, 21 March 2019
  • *Turn polycon on if necessary (do it before turning the computer on) *Turn the computer on if needed
    34 KB (5,218 words) - 16:32, 31 March 2020
  • ...tial Compton signal was seen by Wednesday. One other notable even is that on the Wednesday when I started as Run Coordinator, Beni identified the proble
    1 KB (205 words) - 23:03, 20 March 2019
  • #* Beam studies planned for day shift on Monday #* HV tripped on two inner FCal blocks ([https://logbooks.jlab.org/entry/3670196 logbook ent
    8 KB (1,024 words) - 08:44, 27 March 2019
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    8 KB (1,192 words) - 16:50, 4 April 2019
  • ...production data taking were extremely stable. Out of the 91.5h of CW beam on target, we could use 87.2h (95%) and recorded almost 8 billion triggers.
    2 KB (358 words) - 14:37, 21 March 2019
  • # Do-over on comparison studies # [https://github.com/JeffersonLab/HDGeant4/issues Issues on GitHub] (all)
    4 KB (693 words) - 14:07, 12 April 2019
  • #* Collected ~475M triggers on empty target since Monday evening #* Mass flow controller on counting room table
    5 KB (661 words) - 08:22, 3 April 2019
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    7 KB (1,084 words) - 14:21, 18 April 2019
  • :*Continued running at 200nA on LHe Target. :*Continued running at 200nA on LHe Target.
    4 KB (567 words) - 09:12, 15 April 2019
  • ...roduction data was collected over the weekend with the empty target cell. On Monday the target was filled with Helium and production data was collected ...early part of the run period, which were deemed to be unsustainable. Thus on Tuesday it was decided that the beam energy for the remainder of the run wo
    2 KB (278 words) - 11:20, 18 April 2019
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    6 KB (903 words) - 13:25, 2 May 2019
  • #* Drew updated on status of CompCal calibrations using the snake scan from the beginning of S ...f this could be induced by some other effect (e.g. polarity of the voltage on the CCAL motor when moving to the right vs. to the left)
    3 KB (431 words) - 12:41, 26 May 2019
  • # [https://github.com/JeffersonLab/HDGeant4/issues Issues on GitHub] (all) # [https://github.com/JeffersonLab/HDGeant4/pulls Pull Requests on GitHub] (all)
    4 KB (536 words) - 17:12, 2 July 2019
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    8 KB (1,285 words) - 17:49, 11 July 2019
  • # [https://github.com/JeffersonLab/HDGeant4/issues Issues on GitHub] # [https://github.com/JeffersonLab/HDGeant4/pulls Pull Requests on GitHub]
    4 KB (653 words) - 10:22, 24 September 2019
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    5 KB (786 words) - 12:25, 8 August 2019
  • ...ed in the directory <code>/group/halld/www/halldweb/html/talks/2019</code> on the JLab CUE. This directory is accessible from the web at https://halldweb There is a [https://bluejeans.com/s/jjmiz recording of this meeting] on the BlueJeans site. Use your JLab credentials to access it.
    4 KB (613 words) - 20:18, 31 July 2019
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    5 KB (818 words) - 13:26, 22 August 2019
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    8 KB (1,227 words) - 16:50, 19 September 2019
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    7 KB (1,091 words) - 09:39, 18 October 2019
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    6 KB (975 words) - 14:50, 31 October 2019
  • # [https://github.com/JeffersonLab/HDGeant4/issues Issues on GitHub] # [https://github.com/JeffersonLab/HDGeant4/pulls Pull Requests on GitHub]
    5 KB (837 words) - 11:52, 25 November 2019
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    8 KB (1,261 words) - 08:57, 13 December 2019
  • ##* Update on amplitudes: A and B remain, but amplitude C is zero by current conservation #* We will meet on Fri Dec 20, 10 am.
    4 KB (669 words) - 13:06, 6 December 2019
  • # [https://github.com/JeffersonLab/HDGeant4/issues Issues on GitHub] # [https://github.com/JeffersonLab/HDGeant4/pulls Pull Requests on GitHub]
    2 KB (273 words) - 11:43, 12 February 2020
  • ...#gid=1865737386 Trigger Spreadsheet] <font color="red">Started Filling out on 9/28/18</font> Comment --> #* Sergei met with CODA group, working on improving regular DAQ and also getting cDAQ going
    11 KB (1,662 words) - 10:23, 11 December 2019
  • ...opping up which may be due to low data statistics. Mariana is also working on the event selections for etaprimepi-delta++ and will send the data over to ...onditional q-factor people where the second q-factor has to be conditioned on the first q-factor. Zach is going to JLab (next week I think) and will gath
    44 KB (7,327 words) - 11:14, 12 May 2022
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    7 KB (1,052 words) - 17:35, 9 January 2020
  • completed 95% of the commissioning objective. Only two HV scans left on the a agenda. In total we have collected more than 6B triggers on the
    1 KB (173 words) - 11:41, 19 December 2019
  • ..., investigation of the data corruption problem (with updated FADC firmware on FCal crates), a short TAC test, a ComCal anode test and the tagger accident
    3 KB (509 words) - 06:46, 19 May 2020
  • ...ot reflected in the study). The accidental study overseen by Richard Jones on Jan 17 saw a maximum current of 2100 nA to Hall D. The accelerator was succ
    3 KB (417 words) - 15:03, 24 January 2020
  • #* HV on FDC:hv:3:c4:4p had to be lowered. #* Display dumplette location on goniometer GUI
    7 KB (1,014 words) - 09:39, 5 February 2020
  • #** Beni went into hall to work on CDC boards #* Hovanes worked on diamond position for JD70-105 0/90 (see reports)
    6 KB (824 words) - 09:39, 12 February 2020
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    7 KB (1,127 words) - 15:38, 20 February 2020
  • #**Colin turned on PDU for FCAL. ...rk in the test lab, etc. We will have one SSO on shift and one crew chief on-call. Experimenters shall not have accesses. In case of human emergency,
    4 KB (616 words) - 09:29, 26 February 2020
  • #* Starting with a special HARP scan requested by Hovanes: hall A on at 150nA, 350nA for us, use Tagger_Electron_Left_Halo for analyzing. #* root_spy crashes when started on Gluon03: [https://logbooks.jlab.org/entry/3793251] [https://logbooks.jlab.o
    5 KB (706 words) - 10:14, 4 March 2020
  • of CW beam on target (56%). The experiment was able to use 78.7 hours of (see below), it did not cause a significant down time on our side, as it
    3 KB (408 words) - 17:11, 28 February 2020
  • ...ates instability: [https://logbooks.jlab.org/entry/3798851 "dips" in rate] on Friday evening.
    6 KB (827 words) - 06:53, 12 March 2020
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    7 KB (1,083 words) - 13:24, 19 March 2020
  • #* [https://logbooks.jlab.org/entry/3802240 new labels on trigger monitoring plot] #* [https://logbooks.jlab.org/entry/3802778 HV raised on many (25) TAGH channels] -- Beni
    7 KB (1,014 words) - 07:52, 18 March 2020
  • ** 4-hall video feeds are now available, displayed on screen above copier *** [https://physdiv.jlab.org/CountingHouses/# on-site access only, please]
    6 KB (787 words) - 08:42, 24 March 2020
  • ...e in around 10am to start working Hall D proper beamline vacuum, then move on to collimator and Tagger when surveyed #** Turn off the turbo station that is pumping on the OVC ?
    7 KB (1,175 words) - 09:10, 26 March 2020
  • ...to the numbers, we were scheduled for 155 hours of running with 57% of CW on target (88.7 hours). In total, we lost about 5 hours due to diamond/radiato ...magnet performances, there were only minimum issues: 1. FCal board failed on Sunday owl shift; 2. One DIRC LV group tripped during a DAQ stop action. Bo
    2 KB (265 words) - 14:36, 24 March 2020
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    6 KB (964 words) - 11:49, 10 May 2020
  • # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail * Efficiency and mis-identification for different cut requirements on DLL
    9 KB (1,380 words) - 13:25, 8 June 2020
  • ...ized who were responsible to keep track of the monitoring plots and report on the quality of the data every 12 hours. ...completed on Tuesday evening, and a partially successful TAC run was taken on Wednesday morning. This week GlueX used 107 hours of acceptable beam, and a
    2 KB (260 words) - 08:57, 19 May 2020
  • # More discussion on recon and analysis launch compatability? (all) ...[https://groups.google.com/forum/#!forum/gluex-software recent discussion on the GlueX Software Help List] (all)
    8 KB (1,153 words) - 12:57, 27 May 2020
  • The meeting will be on Tuesday June 2, 2020 at 11:15am EDT. ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.<
    5 KB (658 words) - 11:49, 2 June 2020
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    8 KB (1,300 words) - 20:37, 29 June 2020
  • *Turn polycon on if necessary (do it before turning the computer on) *Turn the computer on if needed
    23 KB (3,522 words) - 08:01, 11 January 2022
  • * [[Media:BCAL LIGHTGUIDE LOCATION.pdf | Location of Light Guide Positions on Module Face]] ...arrel_Calorimeter#Old_Instructions| BCAL DAQ old]] Instructions from Alex on how to run the BCAL DAQ as of 31 March 2014.
    3 KB (379 words) - 17:56, 2 February 2022
  • ...is a collection of links and suggestions in order to get you oriented and on the way to analyzing GlueX data. GlueX is a multi-purpose experiment with many subsystems. Many people work on this experiment, and their efforts are organized into different subgroups,
    14 KB (2,217 words) - 11:42, 25 April 2024
  • # Turn lower section of tagger hodoscope ON. ...looking at the [https://halldweb.jlab.org/hoss HOSS database]. Just click on a run number and look for the count of EPICS events in the far right column
    6 KB (998 words) - 08:21, 1 September 2020
  • The meeting will be on Thursday July 16, 2020 at 11:00 AM EDT. ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.<
    5 KB (640 words) - 11:59, 16 July 2020
  • *Beni ramped up the solenoid on Aug. 1st. However, due to a problem with the PXI readout, it was ramped dow *Shift Started on Aug. 1st, 8am.
    5 KB (761 words) - 08:23, 5 August 2020
  • #* Moving beam spot on diamond during Hovanes' shift #* Thanks to all on-site and monitoring shift crews, experts on call and everybody working in the hall
    5 KB (740 words) - 11:43, 12 August 2020
  • ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.< # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail
    9 KB (1,356 words) - 12:24, 27 August 2020
  • The meeting will be on Thursday August 13, 2020 at 11:00 AM EDT. ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.<
    6 KB (776 words) - 11:03, 13 August 2020
  • #* Hall C moller (6 hours) on Friday, starting 8:00-9:00 am #* Hall C path change half on the table: Either 1 pass run or polarized target replacement. TAC run for u
    8 KB (1,187 words) - 10:51, 19 August 2020
  • ...ttps://logbooks.jlab.org/entry/3839239 DAQ issues], random pulser was left on from the CPP run yesterday morning, which was swamping the DAQ with too man #** 8 hours: standard FCAL-BCAL trigger at 150 nA (low energy TAGH turned on)
    9 KB (1,268 words) - 09:09, 2 September 2020
  • # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail ...dweb.jlab.org/wiki/index.php/April_20-21,_2020_DIRC#Action_items Follow-up on additional action items from workfest] (All)
    2 KB (267 words) - 12:59, 31 August 2020
  • * Magnet ramp on Tuesday morning begins at 10 am to coincide with RF recovery ...tandard GlueX no-field measurements with 50nA on 10^-4 amorphous radiator (on amorphous ladder)
    4 KB (560 words) - 15:46, 3 September 2020
  • The meeting will be on Thursday September 10, 2020 at 11:00 AM EDT. ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.<
    6 KB (778 words) - 11:06, 10 September 2020
  • #*On Monday: #*On Tuesday:
    8 KB (1,232 words) - 09:03, 16 September 2020
  • ...9 hours of the beam (26% of the scheduled time). Major causes of down time on our side included a fault in the goniometer controller which required acces ...The movement of the beam spot for the -45/45 diamond orientation was done on Wednesday afternoon after my tenure ended, which made the experiment comple
    3 KB (524 words) - 17:08, 10 September 2020
  • ** SAD schedule will be posted on the Hall D Engineering website https://www.jlab.org/Hall-D/engineering.php #** Turn off the turbo station that is pumping on the OVC
    4 KB (645 words) - 07:57, 24 September 2020
  • The meeting will be on Thursday September 24, 2020 at 11:00 AM EDT. ...To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.<
    5 KB (668 words) - 10:39, 24 September 2020
  • ...ed or not. In addition to these planned tests, RCDB/DAQ tests were carried on (Dmitry Romanov and Sergey Furletov) to study how to shorten the stop-run d ...e for 11h due to 7h of planned beam studies and a 4h power supply failure. On Tuesday the beam was down for 14h due to a failure of the 4th compressor co
    2 KB (364 words) - 17:14, 23 September 2020
  • # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail ...e: Virtual conference Oct 31 - Nov 7; 15-min + 3-min Q&A oral presentation on Nov 4
    2 KB (274 words) - 13:14, 28 September 2020
  • # More information on connecting to [[Connect to the Data Challenge Meetings|bluejeans]] is avail ...e: Virtual conference Oct 31 - Nov 7; 15-min + 3-min Q&A oral presentation on Nov 4 at 9:48am; video-upload required 48 hrs before the session.
    2 KB (316 words) - 13:11, 12 October 2020

View (previous 250 | next 250) (20 | 50 | 100 | 250 | 500)