Difference between revisions of "Time-of-Flight/Start-Counter Meeting, June 12, 2009"
From GlueXWiki
(notes only) |
(→Minutes: complete draft) |
||
Line 21: | Line 21: | ||
=Minutes= | =Minutes= | ||
− | < | + | FIU: Werner Boeglin<br> |
− | + | FSU: Sasha Ostridov<br> | |
+ | JLab: Mark Ito, Simon Taylor, Tim Whitlatch, Beni Zihlmann | ||
− | + | =Time-of-Flight Status= | |
− | + | Sasha reports that they have hired a student, Chuck Brandon, to work full time on measurements from the prototype. Again the immediate goals are: | |
− | + | # Repeat previous measurements with a constant fraction discriminator | |
− | constant fraction | + | # Use scalers to measure efficiency |
− | scalers to measure efficiency | + | |
− | + | ||
− | + | ||
− | + | They are still gathering equipment for these tests. | |
− | + | =Start Counter Status= | |
− | + | ||
− | + | ||
− | + | All of the main ingredients for testing this summer have arrived at FIU: | |
− | + | # fine-mesh pmt | |
− | + | # SiPM sample | |
+ | # scintillator in various sizes | ||
+ | # full-scale light guide | ||
− | + | =Action Items= | |
+ | |||
+ | # Tim will find a copy of Chuck's drawing of the target area to show us. | ||
+ | # Elliott will ship a flash ADC to FSU for their test set-up. | ||
+ | # FIU will study different geometries for the start counter. | ||
+ | # Sasha will look at the bugs in his single-pi HDGeant study which uses the time-of-flight. |
Revision as of 16:10, 12 June 2009
Contents
Location, Time
Friday, June 12, 2009
3:00 pm EDT
JLab: CEBAF Center, Room F326/327
ESNet: 8542553
EVO: direct meeting link
Conference Group: 800-377-8846, participant code: 39527048
Agenda
- Minutes from the last meeting
- Time-of-Flight Status: Sasha O.
- Start Counter Status: Werner/Seema
- Schedules: Mark
- Mailing List: halld-pid@jlab.org
- Action items
Minutes
FIU: Werner Boeglin
FSU: Sasha Ostridov
JLab: Mark Ito, Simon Taylor, Tim Whitlatch, Beni Zihlmann
Time-of-Flight Status
Sasha reports that they have hired a student, Chuck Brandon, to work full time on measurements from the prototype. Again the immediate goals are:
- Repeat previous measurements with a constant fraction discriminator
- Use scalers to measure efficiency
They are still gathering equipment for these tests.
Start Counter Status
All of the main ingredients for testing this summer have arrived at FIU:
- fine-mesh pmt
- SiPM sample
- scintillator in various sizes
- full-scale light guide
Action Items
- Tim will find a copy of Chuck's drawing of the target area to show us.
- Elliott will ship a flash ADC to FSU for their test set-up.
- FIU will study different geometries for the start counter.
- Sasha will look at the bugs in his single-pi HDGeant study which uses the time-of-flight.