Revision as of 08:36, 10 May 2024

Meeting time and location:

Agenda

Preparation of parts for ECAL -- Sasha
- - signal cables and 2 patch panels [1] - done
- - HV short cables: done
- - HV long cable, 18 ready (out of 36)
- - HV distribution boards: not designed
- - LV cables: waiting for about 20 cables
- - LV distribution boards [2]. One board out of 4 is ready
- - LED: the prototype of the LED board has been received. Chris will populate it with components
Ongoing projects
- - Update from Laveen
- - Testing, labeling and bundling LV cables
Testing of PMT dividers -- Sasha / Vlad / George / Mindy
- - Testing procedure [3]
- - All dividers have been fabricated and tested by George [4]
  - Continue removing regulators from the PCB (about 70 regulators have been removed, require re-test divider)
Installation of the FCAL2 detector & integration to GlueX -- Sasha / Vlad / Hakob / Laveen
- Installation of the LMS has been completed [5]
- Installation and testing cables and dividers [6] [7]
- Detector installation page
  - (links from the previous meetings [8][9][10])
- Beam tests with the PS
  - measure shower beam profile and reconstruction in the crystal/LG transition region
  - (install prototype with 5x5 PbWO4 modules + ? LG)
- Other hardware projects
  - --prototype of the ECAL veto counter
FCAL2 poster for open house?
- JEF/ECAL/FCAL poster (Laveen + students)
Analysis/Simulation

@@ Line 23: / Line 23: @@
 ** [https://halldweb.jlab.org/wiki/index.php/FCAL_Installation Detector installation page]
 *** (links from the previous meetings [https://logbooks.jlab.org/book/halld][https://halldweb.jlab.org/detectors/fcal2/installation/photos/install_fcal/students_detector1.jpg][https://halldweb.jlab.org/detectors/fcal2/installation/photos/install_fcal/students_detector.jpg])
-** '''Preparation for beam tests with the PS'''
+** '''Beam tests with the PS'''
-***   measure shower beam profile
+***   measure shower beam profile and reconstruction in the crystal/LG transition region
-***   shower reconstruction between PbWO4 and LG
+***  (install prototype with 5x5 PbWO4 modules  + ? LG)
 ** '''Other hardware projects'''
 *** --prototype of the ECAL veto counter
-*** --study shower profile using PS (also transition region between lead tungstate and LG modules (?) )
 *'''FCAL2 poster for open house?'''
-** JEF/ECAL/FCAL poster
+** JEF/ECAL/FCAL poster  (Laveen + students)
 *'''Analysis/Simulation'''