Revision as of 18:52, 2 March 2023

Meeting time and location:

Agenda

Preparation of parts for FCAL2 modules -- Sasha
- Available crystals:
  1450 (modules)
  
  32 (ready for fabrication)
  
  40 (installed on CCAL) available on March 20
  
  (some CCAL crystals from the inner part will not be used for the FCAL2)
  
  95 expect to receive from CRYTUR in May [1]
  
  Total 1617
- Wrapped crystals: 32 (Mindy)
  - George (DSG group) finished with disassembling CCAL modules and removing LMS caps
  (work on preshaping of ESR reflectors for CRYTUR)
  - Mindy (DSG group) solder wires to sockets (while waiting for crystals)
  - Parts. 60 remaining PMT housings and cylinders have been ordered by Tim (should be ready for fabrication in about 2 months)
Module fabrication -- Sasha
- Fabricated modules: Total 1450 (15 modules fabricated since last week)
  Currently available for fabrication: 32
Testing of PMT dividers -- Sasha / Arshak
- FCAL2 modules with dividers installed on the CCAL
Installation of the FCAL2 detector -- Sasha / Arshak
- Detector installation page
- Updates from the meetings with Tim's group
- Manpower and division of tasks
- Projects for summer students
- Meeting with the detector imaging group
Light Monitoring System -- Arshak
Simulations/Analysis

@@ Line 25: / Line 25: @@
 <!-- *** [https://halldweb.jlab.org/detectors/fcal2/module_fabrication/status/11_11_22 Moving modules to the new lab (EEL108)] -->
 * '''[[Testing of PMT dividers]]''' -- Sasha / Arshak
-** Most parts for dividers have been received
+** FCAL2 modules with dividers installed on the CCAL
-** 25 dividers for the prototype are ready (have to be tested), expect to receive the LV patch panel prototype
-during next week. The CCAL prototype should be ready by the end of next week (?)
 * '''Installation of the FCAL2 detector''' -- Sasha / Arshak
 ** [https://halldweb.jlab.org/wiki/index.php/FCAL_Installation Detector installation page]