Difference between revisions of "Offline Monitoring Data Validation"
From GlueXWiki
(→Run Periods) |
(→Checklist) |
||
Line 27: | Line 27: | ||
= Checklist = | = Checklist = | ||
+ | |||
+ | Reference run: 30780 (5 files) | ||
* '''BCAL''' | * '''BCAL''' | ||
− | ** Check ... | + | ** Check Occupancy - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2017-01/mon_ver29/Run030780/bcal_occupancy.png link] ] |
+ | ** Check Hit Efficiency - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2017-01/mon_ver29/Run030780/bcal_hist_eff.png link] ] | ||
+ | ** Check BCAL Recon. 1 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2017-01/mon_ver29/Run030780/HistMacro_BCALReconstruction_p1.png link] ] | ||
+ | ** Check BCAL Recon. 2 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2017-01/mon_ver29/Run030780/HistMacro_BCALReconstruction_p2.png link] ] | ||
+ | ** Check BCAL Matching - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2017-01/mon_ver29/Run030780/HistMacro_Matching_BCAL.png link] ] | ||
* '''CDC''' | * '''CDC''' | ||
− | ** Check | + | ** Check - Reference: [link] |
* '''FCAL''' | * '''FCAL''' | ||
** Check ... | ** Check ... | ||
Line 47: | Line 53: | ||
** Check ... | ** Check ... | ||
* '''RF''' | * '''RF''' | ||
− | ** Check timing offsets - Reference: [link] | + | ** Check timing offsets - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2017-01/mon_ver29/Run030780/HistMacro_RF_p2.png link] ] |
*** Should be centered around zero | *** Should be centered around zero | ||
* '''Timing''' | * '''Timing''' |
Revision as of 17:18, 10 July 2018
This page contains the procedure for checking if production runs are of good quality and can be used for physics analysis.
Run Periods
- RunPeriod-2016-02 Validation
- RunPeriod-2016-10 Validation
- RunPeriod-2017-01 Validation
- RunPeriod-2018-01 Validation
Procedure
For each production run, do the following:
- Go to the | Offline Run Browser page.
- Follow the steps outlined in the checklist below.
- Certify that each section is okay
- (DB + script to be developed)
- Set run status = 1 in RCDB
- (script provided)
Run Statuses
- -1 - unchecked
- 0 - rejected (not physics-quality)
- 1 - approved
- 2 - approved long/"mode 8" data
Checklist
Reference run: 30780 (5 files)
- BCAL
- CDC
- Check - Reference: [link]
- FCAL
- Check ...
- FDC
- Check ...
- PS
- Check ...
- SC
- Check ...
- TAGH
- Check ...
- TAGM
- Check ...
- TOF
- Check ...
- RF
- Check timing offsets - Reference: [ link ]
- Should be centered around zero
- Check timing offsets - Reference: [ link ]
- Timing
- Check Track Matched Timing - Reference: [link]
- Check Tagger/RF Timing - Reference: [link]
- Check Tagger/SC Timing - Reference: [link]
- Analysis
- Check ...