Revision as of 07:54, 18 September 2020

<- Back to Run Coordination Meetings:Summer2020

Integrated trigger count

GlueX Statistics Run Sheet

MEDCON 5 restrictions (Bob May email)

1. adhere to counting room capacity restrictions
2. maintain 6 ft. separation (briefly passing another person inside 6 ft. while moving about the counting room is inevitable and is OK)
3. wear masks anytime more than one person present in the counting room
4. at MEDCON 5 the lab has no cafeteria services because eating "cafeteria style" (eating in common from prepared food) is inconsistent with COVID-19 controls. Staging food in the counting room to share is inconsistent with MEDCON 5 COVID-19 controls.
5. food and drink consumption - because it requires removing face coverings to consume - should be limited to packaged food and drink brought for personal use that is consumed while maintaining at least 6 ft. from the nearest person and ideally, consumed in a separate room from others.

Friday, September 18 at 8:30

1. Last 24 hours: 08:30 to 10:0010:00 to 16:0016:00 to 22:0022:00 to 04:0004:00 to 08:30
   • Production, since Wednesday 1:30pm: total 6.45B - perp 3.28B para 2.71B amo 0.46B
   • LINACS tripped at 11am and beam returned at 3:45pm, PD summary
   • Pass change, hall accessed at 6am
     • New CCAL dividers (Sasha/Vladimir)
     • Reset CCG (Foyles)
2. Report/issue
   • Difficulty in nudging the coherent peak, Mark D. <<fitter only works in the near neighborhood, the GUI is zoomed far out by default and because there is a big time lag on the motion. Once you are nearby it pays to click once and then wait 30 seconds>>
   • FCAL PDUs rebooted
   • DAQ problem
3. Run plan
   • Production
   • Check CCal active basis with 2nA beam. 2h. A. Somov. To be scheduled when Hall C is at 1-pass, Hall A is down and we have our own slit.
4. MEDCON5 Shutdown Plan
   • Access
   • Timing of work
   • Plan for
     • Target
     • Solenoid
     • Mechanical
     • Electrical

Thursday, September 17 at 8:30

1. Last 24 hours:08:45 to 10:0010:00 to 16:0016:00 to 22:0022:00 to 04:0004:00 to 08:30
   • Production: total 4B - perp 1.84B - para 1.82B - amo 0.45B
   • HARP scan on Sept 16 at 10:27
   • Loss 5h, tagger hall access at 22:20 to repair goniometer
2. Report/issue
   • Persisting solenoid alarm
   • Goniometer not moving, controller boards has to be replaced, run 73169 is junk
   • Problem with HYDRA
   • FCAL PDU reset
   • Reset BCAL pulser
3. Run plan
   • Production
   • Tomorrow at 6am during the pass change, beam is expected to be down for less than 2hrs
   • Replace FCAL base
   • Check CCal active basis with 2nA beam. 2h. A. Somov. To be scheduled when Hall C is at 1-pass, Hall A is down and we have our own slit.