Revision as of 12:20, 8 July 2016

June 30, 2016 Drift Chamber meeting

Connection

Instructions for Bluejeans meeting connection
Meeting ID: 290664653

Headline text

To join via a Web Browser, go to the page [1] https://bluejeans.com/290664653.

Agenda

Detector updates
- CDC update (Naomi/Mike/Beni)
- FDC update (Lubomir/Alex)
  - Position resolution continued: Residual_2D Slice_Fit Profile_Fit
  - Timing Reconstruction: Pseudo_old Pseudo_new
  - FDC tracking with timing using GenFit with Event Visualization Environment (EVE) of Root track, zoomed in one package, after left/right decision, X vs Y residuals, X residuals,Y residuals
NIM Papers
- svn ls https://halldsvn.jlab.org/repos/trunk/publications/GlueXCDC
- svn ls https://halldsvn.jlab.org/repos/trunk/publications/GlueXFDC
fADC125 meeting (Naomi, Cody, Beni)
Other
- TRD meeting

@@ Line 28: / Line 28: @@
 = Minutes =
-Participants: Sean (NU), Naomi, Mike (CMU) Luke, Cody, Alexander A., Simon, Nick, Chris, and Lubomir (JLab).
+Participants: Sean (NU),Curtis, Naomi, Mike (CMU) Luke, Alexander A., Simon, Sergey, and Lubomir (JLab).
 == CDC ==
-- Naomi is working on the gains: the phi-dependent gain variations are not correlated with the tube deformations. Mike is working on the time to distance calibration.
+- Naomi is working on the gain calibration, Mike on the straw deformation effects and corresponding errors.
-- Nick: on the top HVB that had issues over the last run he found some magnetic debris.
 == FDC ==
-- Alex showed a presentation (linked above) about his studies of the FDC efficiency and resolution using higher level (DFDCHit) objects for runs with magnetic field. For these studies he applied some requirements for the track quality, like p>0.4GeV and more than 4 hits per package. The efficiencies look similar to the one with straight tracks, while the resolutions are worse. The cathode resolutions after taking out the magnetic field effects are about 300-350 microns. The FDC timing information is not used, so the residual distributions in direction perpendicular to the wires are almost flat.
+- Alex continued his presentation (linked above) from the last meeting
-- Lubomir presented plots showing drop (of about 30-40%) of the average charge with the drift time, probably due to some contamination. Comparison of the results for the runs since 2014 (first plot) doesn't show deterioration in the FDC performance. Correspondingly, the efficiencies (second plot) for drift distances > 4 mm drop sharply down to ~50% at 5 mm, however it corresponds to about 5% average drop. As we measured the Oxygen contamination to be < 50ppm, there must be something else in the gas.
 == fADC125 ==

Difference between revisions of "Minutes-6-30-2016"

Revision as of 12:20, 8 July 2016

Connection

Headline text

Agenda

Navigation menu

Views

Personal tools

Navigation

Search

Tools