Difference between revisions of "January 16, 2024 KLONG CPS Design Meeting"

From GlueXWiki
Jump to: navigation, search
(Created page with "== Meeting Time and Place == Tuesday January 16, 2024, 1pm Hall D Counting House * Invited - Hovanes Egiyan, Stephanie Worthington, Keith Harding, Pavel Degtiarenko, Tim Wh...")
 
(→‎Minutes)
Line 13: Line 13:
  
 
== Minutes ==
 
== Minutes ==
 +
 +
* Discussed background of the project and the goal of getting the design completed in a little over a year
 +
* Pavel presented the current conceptual design based on his analysis
 +
** Copper radiator
 +
*** Operate remotely
 +
*** 300 micron repeatability
 +
*** 2 thicknesses plus blank
 +
*** 2cm diameter?
 +
*** rad hard materials (no encoder)
 +
*** maybe proximity switch/LVDT for positions
 +
** Need to develop a complete thermal model as design progresses
 +
** Use of a steel core for support
 +
** overall alignment of magnet and radiator to be within a few hundred microns
 +
** Ability to move the assembly (with out magnets) completely out of the beam to the north wall
 +
** Ability to crane or forklift the core out during decommissioning
 +
** Total weight approximately 90 tonnes
 +
** Need temperature sensors on copper, lead and steel
 +
** Need to fine tune the thermal calcs on copper absorber
 +
** Need water temperature and flow meters
 +
** US magnet to be designed to 2x current plus 10%
 +
** Need tungsten block to absorb the electron beam on magnet failure
 +
** Consult with Hall C folks on their design experience of a CPS
 +
* Pavel to check into exporting his model in a compatible format for NX ( Open Scad etc...
 +
* Stephanie to look into importable files from her end
 +
* Tim to provide stp file from ANSYS for Designers
 +
* Tim to setup bi-weekly meetings
 +
* Tim to set up and Engineer/Designer detailed meeting
  
 
== Action Items ==
 
== Action Items ==

Revision as of 16:37, 16 January 2024

Meeting Time and Place

Tuesday January 16, 2024, 1pm Hall D Counting House

  • Invited - Hovanes Egiyan, Stephanie Worthington, Keith Harding, Pavel Degtiarenko, Tim Whitlatch, Eugene Chudakov, Josh Ballard

Agenda

  • State goals of meetings (Tim/Hovanes)
  • Review Pavel's current design parameters for the entire CPT (Pavel)
  • Magnet update (Josh)
  • Develop path forward for final design (meetings/schedule etc...) (all)

Minutes

  • Discussed background of the project and the goal of getting the design completed in a little over a year
  • Pavel presented the current conceptual design based on his analysis
    • Copper radiator
      • Operate remotely
      • 300 micron repeatability
      • 2 thicknesses plus blank
      • 2cm diameter?
      • rad hard materials (no encoder)
      • maybe proximity switch/LVDT for positions
    • Need to develop a complete thermal model as design progresses
    • Use of a steel core for support
    • overall alignment of magnet and radiator to be within a few hundred microns
    • Ability to move the assembly (with out magnets) completely out of the beam to the north wall
    • Ability to crane or forklift the core out during decommissioning
    • Total weight approximately 90 tonnes
    • Need temperature sensors on copper, lead and steel
    • Need to fine tune the thermal calcs on copper absorber
    • Need water temperature and flow meters
    • US magnet to be designed to 2x current plus 10%
    • Need tungsten block to absorb the electron beam on magnet failure
    • Consult with Hall C folks on their design experience of a CPS
  • Pavel to check into exporting his model in a compatible format for NX ( Open Scad etc...
  • Stephanie to look into importable files from her end
  • Tim to provide stp file from ANSYS for Designers
  • Tim to setup bi-weekly meetings
  • Tim to set up and Engineer/Designer detailed meeting

Action Items

Retrieved from "https://halldweb1.jlab.org/wiki/index.php?title=January_16,_2024_KLONG_CPS_Design_Meeting&oldid=124334"