GlueX phase 2, 2023-01 data set

From GlueXWiki
Revision as of 09:31, 29 December 2023 by Ijaegle (Talk | contribs) (→‎Periods)

Jump to: navigation, search

List of changes

These lists are giving the run ranges where the FCAL hardware was not changed.

Monitoring results

What is currently in the default variation

Periods

Detailed sub-periods The periods in BOLD are calibrated i.e. have a pedestal and gain tables. Each period corresponds to constant FCAL and/or experimental conditions.

  • period 0: 120166-120222 (AMO, commissioning)
  • period 1: 120223-120266 (AMO mostly HV scans for TAGH/M, few cosmics, commissioning)
  • period 2: 120267-120268 (AMO & Empty Target, commissioning)
  • period 3: 120269-120285 (AMO, commissioning)
  • period 4: 120286-120311 (AMO not clear if Empty or Full)
  • period 5: 120312-120316 (PERP/PARA not clear if Empty or Full)
  • period 6: 120317-120318 (AMO not clear if Empty or Full)
  • period 7: 120319-120330 (PERP/PARA - AMO-120327 not clear if Empty or Full)
  • period 8: 120331-120373 (PERP/PARA - AMO-12036[2-4] Full)
  • period 9: 120386-120421 (PERP/PARA - AMO-120392-120403-120415 Full)
  • period 10: 120436-120479 (PERP/PARA - AMO-120442-120443-120444-120450-120457-120458-120469 Full)
  • period 11: 120480 (AMO - junk?)
  • period 12: 120481-120487 (PERP)
  • period 13: 120488-120521 (AMO - high-intensity test)
  • period 14: 120522-120547 (PARA/PERP AMO-120545-120546-120547)
  • period 15: 120548-120568 (PARA/PERP)
  • period 16: 120569-120609 (PARA/PERP AMO)
  • period 17: 120610-120692 (PARA/PERP AMO)
  • period 18: 120693-120709 (PARA/PERP AM0)
  • period 19: 120710-120733 (PARA/PERP AMO)
  • period 20: 120734-120790 (PARA/PERP AMO)
  • period 21: 120792-120799 (PARAP/PERP AMO)
  • period 22: 120801-120815 (PARAP/PERP AMO)
  • period 23: 120816-120821 (PARAP/PERP AMO)
  • period 24: 120828-120856 (PARAP/PERP AMO)
  • period 25: 120879-120894 (PARAP/PERP AMO)
  • period 26: 120895-120908 (PARAP/PERP AMO - testing of the sort)
  • period 27: 120912-120917 (PARAP/PERP AMO)
  • period 28: 120924-120931 (PARAP/PERP AMO)
  • period 29: 120933-120939 (PARAP/PERP AMO)
  • period 30: 120952-120958 (PARAP/PERP AMO)
  • period 31: 120988-121009 (PARAP/PERP AMO)
  • period 32: 121019-121025 (PARAP/PERP AMO)
  • period 33: 121028-121073 (PARAP/PERP AMO)
  • period 34: 121076-121121 (PARAP/PERP AMO)
  • period 35: 121126-121135 (PARAP/PERP AMO)
  • period 36: 121140-121166 (PARAP/PERP AMO)
  • period 37: 121168-121174 (PARAP/PERP AMO)
  • period 38: 121178-121184 (PARAP/PERP AMO)
  • period 39: 121185-121207 (PARAP/PERP AMO)
Min Run Max Run Batch # Gains
120297 120444 1 [1]
120445 120679 2 [2]
120680 120790 3 [3]
120791 120894 4 [4]
120910 121092 5 [5]
121093 121207 6 [6]

Timing

Pedestals

The pedestal calibration is performed for each run.

  • period 0: 120166-120222 (AMO)
  • period 8: 120331-120373 (PERP/PARA - AMO-12036[2-4] Full)
  • perido 10
  • period 20
  • period 39

Gain matching calibration plots

Checking the FCAL gains

Energy dependence correction monitoring plots

Timing calibration

Is based on

  • period 8: 120331-120373 (PERP/PARA - AMO-12036[2-4] Full)

but applied to all 2023-01 data set

Bad block map

This map is done for each run number by combining the info collected by analyzing the LED and pi0 skims.

  • period 0: 120166-120222 (AMO)
Retrieved from "https://halldweb1.jlab.org/wiki/index.php?title=GlueX_phase_2,_2023-01_data_set&oldid=124164"