View source for GlueX phase 2, 2023-01 data set

== List of changes ==

These lists are giving the run ranges where the FCAL hardware was not changed.
 
== Monitoring results ==

== What is currently in the default variation ==

== Periods ==

The periods in BOLD are calibrated i.e. have a pedestal and gain tables. Each period corresponds to constant FCAL and/or experimental conditions. 

* period 0: 120166-120222 (AMO, commissioning)
* period 1: 120223-120266 (AMO mostly HV scans for TAGH/M, few cosmics, commissioning)
* period 2: 120267-120268 (AMO & Empty Target, commissioning)
* period 3: 120269-120285 (AMO, commissioning)
* period 4: 120286-120311 (AMO not clear if Empty or Full)
* period 5: 120312-120316 (PERP/PARA not clear if Empty or Full)
* period 6: 120317-120318 (AMO not clear if Empty or Full)
* period 7: 120319-120330 (PERP/PARA - AMO-120327 not clear if Empty or Full)
* period 8: 120331-120373 (PERP/PARA - AMO-12036[2-4] Full)
* period 9: 120386-120421 (PERP/PARA - AMO-120392-120403-120415 Full)
* period 10: 120436-120479 (PERP/PARA - AMO-120442-120443-120444-120450-120457-120458-120469 Full)
* period 11: 120480 (AMO - junk?) 
* period 12: 120481-120487 (PERP)
* period 13: 120488-120521 (AMO - high-intensity test)
* period 14: 120522-120547 (PARA/PERP AMO-120545-120546-120547)
* period 15: 120548-120568 (PARA/PERP)
* period 16: 120569-120609 (PARA/PERP AMO)
* period 17: 120610-120692 (PARA/PERP AMO)
* period 18: 120693-120709 (PARA/PERP AM0)
* period 19: 120710-120733 (PARA/PERP AMO)
* period 20: 120734-120790 (PARA/PERP AMO)
* period 21: 120792-120799 (PARAP/PERP AMO)
* period 22: 120801-120815 (PARAP/PERP AMO)
* period 23: 120816-120821 (PARAP/PERP AMO)
* period 24: 120828-120856 (PARAP/PERP AMO)
* period 25: 120879-120894 (PARAP/PERP AMO)
* period 26: 120895-120908 (PARAP/PERP AMO - testing of the sort)
* period 27: 120912-120917 (PARAP/PERP AMO)
* period 28: 120924-120931 (PARAP/PERP AMO)
* period 29: 120933-120939 (PARAP/PERP AMO)
* period 30: 120952-120958 (PARAP/PERP AMO)
* period 31: 120988-121009 (PARAP/PERP AMO)

== Timing ==

== Pedestals ==

The pedestal calibration is performed for each run.

* period 0: 120166-120222 (AMO)
* period 8: 120331-120373 (PERP/PARA - AMO-12036[2-4] Full)

== Gain matching calibration plots ==

* [https://halldweb.jlab.org/primexd/fcal-cal/2023-01/ QC/QA]

== [[ Checking the FCAL gains ]] ==

== Energy dependence correction monitoring plots ==

== Timing calibration ==

Is based on

* period 8: 120331-120373 (PERP/PARA - AMO-12036[2-4] Full)

but applied to all 2023-01 data set

== Bad block map ==

This map is done for each run number by combining the info collected by analyzing the LED and pi0 skims.

* period 0: 120166-120222 (AMO)