February 16, 2021
From GlueXWiki
Revision as of 12:38, 15 February 2021 by Somov (Talk | contribs) (Created page with "* [https://halldweb.jlab.org/detectors/fcal2/dividers/design_meeting_2_16_2021/fcal_amp_lin.pdf Amplifier linearity tests] '''CCAL discussion''' * Order (refurbish) divid...")
CCAL discussion
- Order (refurbish) dividers, use bypassed amplifier (and gain of 3)
FCAL insert
- expected anode current < 20 uA in the inner most FCAL insert layer; current drops rapidly with the radial distance
- (used CCAL in GlueX runs at high luminosity)
- likely do not need an amplifier in most FCAL insert layers
- Do we need to modify the amplifier ?
- - modify the active base
- - redesign an amplifier, use additional power line to supply the on-board amplifier
- - use external amplifiers (position in the FCAL dark room)
- - do not modify the active base, apply non-linearity corrections