Offline Monitoring Data Validation
From GlueXWiki
This page contains the procedure for checking if production runs are of good quality and can be used for physics analysis.
Run Periods
Procedure
For each production run, do the following:
- Go to the | Offline Run Browser page.
- Follow the steps outlined in the checklist below.
- Certify that each section is okay
- (DB + script to be developed)
- Set run status = 1 in RCDB
- (script provided)
Checklist
- BCAL
- Check ...
- CDC
- Check ...
- FCAL
- Check ...
- FDC
- Check ...
- PS
- Check ...
- SC
- Check ...
- TAGH
- Check ...
- TAGM
- Check ...
- TOF
- Check ...
- RF
- Check timing offsets - Reference: [link]
- Should be centered around zero
- Check timing offsets - Reference: [link]
- Timing
- Check Track Matched Timing - Reference: [link]
- Check Tagger/RF Timing - Reference: [link]
- Check Tagger/SC Timing - Reference: [link]
- Analysis
- Check ...