Difference between revisions of "Sweep magnet 2"
From GlueXWiki
(→Sweep2 System Design) |
|||
Line 44: | Line 44: | ||
− | + | == Sweep2 System Design == | |
Revision as of 11:37, 21 April 2009
Contents
Sweep Magnet #2
The magnet which we will use for the second sweep is a DW magnet on permanent load from the FEL group.
The drawings set for the magnet is here: | Dw Magnet
Characteristics of the DW Magnet
Parameter | Value |
---|---|
Design Field | 0.248 T |
Effective Length | 0.408 m |
Max Current | 200 A |
Max Voltage drop | 11 V |
LCD water | 0.64 gpm @ 80 psi for a 21° F rise |
Magnet gap | 2.00 inches |
Gap Width | 8.4 inches |
Sweep Magnet #2 Power supply
I asked Bill Merz to recommend a power supply for this magnet. He recommended the following companies. Based on this I decided to base the preliminary design on the GenSys power supply which is the newer version of the lambda power supply. Original mail from Bill