Revision as of 09:18, 26 July 2024

Meeting time and location:

Agenda

Preparation of parts for ECAL -- Sasha
- - HV long cable: Sammy and Mindy have to assemble 10 cables
- - HV distribution boards. Chris has completed the design of the HV distribution boards. We met with Chris, Tim, and Scot regarding location of the boards on the detector frame
- - LED: Started testing the prototype of the LMS (need to make the detector room light tight)
Ongoing projects - All
Installation of the FCAL2 detector & integration to GlueX -- Sasha / Vlad / Hakob / Laveen
- Report from students [1]
- Installation and testing cables and dividers [2][3]
- Installation of long signal cables [4]
- Installing LV patch panels and cables [5]
- Installation of optical fibers [6]
- Detector installation page
- Safety briefings
Summer students -- Sasha
- - Olivia, Ben, and Shane are on site. Expect one student from Wuhan (have to start with the paperwork)
- - Projects: document all test results, assist with the cable/divider installation, install signal cables on patch panel, work on the ECAL monitoring plots
Beam tests with the PS
- - measure shower beam profile and reconstruction in the crystal/LG transition region
  - (install prototype with 5x5 PbWO4 modules + ? LG)
Other hardware projects
- prototype of the ECAL veto counter (?)
Analysis/Simulation

@@ Line 10: / Line 10: @@
 * '''Ongoing projects'''  - All
 <!-- **  - [https://halldweb.jlab.org/detectors/fcal2/installation/meetings/05_10_2024/May-10-2024-L.pdf Update from Laveen] -->
-* '''[[Testing of PMT dividers]]''' -- Sasha / Vlad / George / Mindy
-** - [[File:regulators.xlsx]]   Map of dividers with removed regulators
-** - Testing procedure [https://halldweb.jlab.org/detectors/fcal2/dividers/divider_test_guide.pptx]
-** - All dividers have been fabricated and tested by George [https://halldweb.jlab.org/wiki/index.php/Final_test_of_dividers]
-***  Continue removing regulators from the PCB (about 70 regulators have been removed, require re-testing dividers)
 * '''Installation of the FCAL2 detector & integration to GlueX''' -- Sasha / Vlad / Hakob / Laveen
 ** Report from students [https://halldweb.jlab.org/detectors/fcal2/installation/meetings/06_28_2024/student_report_06_28_2024.pptx]