Difference between revisions of "Inspection with an optical microscope"
From GlueXWiki
m |
m |
||
Line 1: | Line 1: | ||
# All features that appeared in lines are in the direction of the wire spiral. | # All features that appeared in lines are in the direction of the wire spiral. | ||
− | + | # Microscope has a light source underneath the sample | |
Line 25: | Line 25: | ||
No extra holes after irradiation are observed. | No extra holes after irradiation are observed. | ||
+ | |||
+ | |||
+ | |||
+ | == Lamina Thick straw == | ||
+ | {| border="1" cellpadding="2" | ||
+ | |- | ||
+ | |width="415pt"|[[Image:Lamina-thick-new.jpg|thumb|none|400px|Lamina-thick straw that was never used.]] | ||
+ | |width="415pt"|[[Image:stone-thick-undersource.jpg|thumb|none|400px|Lamina thick straw that was irradiated.]] | ||
+ | |- | ||
+ | |} | ||
+ | |||
+ | The straw is not transparent for light. The same results were obtained with light (underneath the sample) on/off. |
Revision as of 19:36, 12 March 2010
- All features that appeared in lines are in the direction of the wire spiral.
- Microscope has a light source underneath the sample
Stone kapton straw
Although it appears the the straw that was irradiated shows more holes - It appears to me that it depends more on the piece of straw (chance) than irradiation (as this effect is not seen in the Lamina-thin straw).
Lamina thin straw
No extra holes after irradiation are observed.
Lamina Thick straw
File:Stone-thick-undersource.jpg Lamina thick straw that was irradiated. |
The straw is not transparent for light. The same results were obtained with light (underneath the sample) on/off.