List of ECAL cosmic runs

Location of files:

on gluons:

/gluonraid5/data4/rawdata/volatile/RunPeriod-2025-01/rawdata/Run130056

the files should be copied to

/cache/halld/RunPeriod-2025-01/rawdata

ECAL North

Scint paddles, north, HV set to 1350 V

1 trigger per 5.6 sec

one good track per about 6 events

Run Number	Date (time)	Events	Comments
130056	Nov-7, 12:21	1500	HVs set to 1040 V for all channels, readout threshold 6 ADC counts, north trig paddles, rate 0.2 Hz, chiller set 64.4 F
130057	Nov-7, 14:52	2009	the same
130060	Nov-9, 14:32	150	the same, the chiller set to 60 F, test conditions, data Ok
130061	Nov-9, 14:46	2801	the same
130063	Nov-10, 16:04	4003	the same
130064	Nov-11,12:22	3231	the same, the chiller set to 55 deg F.
130065	Nov-11,17:11	1008	the same, the chiller set to 55 deg F.
130066	Nov-12,12:22	1904	the same, the chiller set to 55 deg F.
130068	Nov-13,11:58	1586	the same, the chiller set to 55 deg F, add extra fan blowing to the right column.
130069	Nov-13,19:50	2470	the same, the chiller set to 55 deg F, add extra fan blowing to the right column.
Total		20662
130074	Nov-22, 17:30	221	the same
130075	Nov-22, 17:50	3158	the same
130077	Nov-22, 17:50	1530	add one more fan
Total		25571
130090	Dec-1, 17:55	3050	Adjust voltages, set max HV to 1040 V, set amplitudes to 9 ADC counts, ADC threshold 5 counts
130091	Dec-2, 18:43	3272	the same
130092	Dec-3, 9:58	4214	the same

ECAL all HVs switched ON

Setup: ECAL_cosmic.conf (fadc in raw mode)

Run Number	Date (time)	Events	Comments
130145	Dec-22, 12:41	2500 events	HVs set to 1040 V for all channels, readout threshold 6 ADC counts
130147	Dec-22, 19:22	300 events	HVs set to 1040 V for all channels, readout threshold 6 ADC counts, adjust trigger settings
130158	Dec-22, 20:34 - Dec-25, 12:00	74772 events	HVs set to 1040 V for all channels, readout threshold 6 ADC counts
130159	Jan-2,2025 18:44	23484 events	HVs set to 1040 V for all channels, readout threshold 6 ADC counts
130160	Jan-3,2025 14:52	27058 events	HVs set to 1040 V for all channels, readout threshold 6 ADC counts
130161	Jan-4,2025 13:14	12451 events	HVs set to 1040 V for all channels, readout threshold 6 ADC counts, switch off voltages in the inner most layer
130162	Jan-5,2025 16:45	79446 events	HVs set to 1040 V for all channels, readout threshold 6 ADC counts, switch off voltages for 2 inner most layers

Fix all channels, reduce HV's, peak at 9 adc counts

Fixed most channels: (-11,-17) bad cable, (-11,17) unstable amplitude (replace divider), (18,17) and related (replace flash adc, rocecal1, slot18), (-16,2) and (-16, 4) replaced dividers and reconnect PMT, (-14,2) secure divider connection

Run Number	Date (time)	Events	Comments
130222	Jan-15, 20:06	17325 events	readout threshold 6 ADC counts
130241	Jan-17, 10:52	1258 events	readout threshold 5 ADC counts
130270	Jan-18, 0:44	48047 events	readout threshold 5 ADC counts
130271	Jan-19, 17:08	3288 events	readout threshold 5 ADC counts
130272	Jan-19, 20:14	events	readout threshold 5 ADC counts