Visual inspection
From GlueXWiki
Revision as of 09:37, 18 October 2022 by Somov (Talk | contribs) (→Possible issued with lead glass module)
Possible issued with lead glass module
- Broken lead glass, see Fig. 1 (module taken from the FCAL prototype)
- some problems can be seen when looked on the lead glass block from the side opposite to the PMT
- lead glass module has to be disassembled
- Issues with wrapping
- small damages (holes) of the Aluminized mylar, See Fig. 2 (can be fixed using Al sticky tape, thickness < 20 um)