Difference between revisions of "Visual inspection"
From GlueXWiki
Line 4: | Line 4: | ||
<gallery> | <gallery> | ||
− | Image:glass_wrap_prob.jpg | Fig. 2 Wrapping issue: teared Aluminized mylar, fix without disassembling module | + | Image:glass_wrap_prob.jpg | Fig. 2 Wrapping issue: teared Aluminized mylar, fix without disassembling module |
− | Image: | + | Image:glass_wrap_prob1.jpg | Fig. 3 Wrapping issue: teared Aluminized mylar, fix without disassembling module |
− | + | Image:glass_wrap_prob2.jpg | Fig. 4 Wrapping issue: teared Aluminized mylar, fix without disassembling module | |
− | Image: | + | |
− | + | ||
</gallery> | </gallery> | ||
+ | <gallery> | ||
+ | Image:glass_pmt_prob.jpg | Fig. 5 Damaged PMT | ||
+ | Image:glass_color_prob.jpg | Fig. 6 Colored lead glass module, possible radiation damage issue. Can be seen without removing steel flange. | ||
+ | Image:glass_color_prob1.jpg | Fig. 7 Colored lead glass module | ||
+ | </gallery> | ||
== Possible issued with lead glass module == | == Possible issued with lead glass module == |
Revision as of 10:47, 18 October 2022
Possible issued with lead glass module
- Broken lead glass, see Fig. 1 (module taken from the FCAL prototype)
- some problems can be seen when looked on the lead glass block from the side opposite to the PMT
- lead glass module has to be disassembled
- Issues with wrapping
- small damages (holes) of the Aluminized mylar, See Fig. 2. Can be fixed using Al sticky tape, thickness < 20 um
- Problems with the Al layer in the wrapping foil:
- Al layer peeled off resulting in some transparent holes in the wrapping.