Difference between revisions of "Time-of-Flight/Start-Counter Meeting, August 7, 2009"

From GlueXWiki
Jump to: navigation, search
(save notes)
Line 18: Line 18:
 
=Minutes=
 
=Minutes=
  
simon, sascha, beni, mark, eugene
+
FSU: Chuck Bryant, Sasha Ostrovidov<br>
Sasha and Chuck
+
JLab: Eugene Chudakov, Mark Ito (chair), Sascha Somov, Simon Taylor, Beni Zihlmann
paul on way to jlab
+
 
with local engineer, will talk to time
+
=Announcments=
 +
 
 +
* Sasha O. told us that Paul Eugenio is on his way to JLab. He is traveling with the FSU engineer and they will be talking to Tim Whitlatch, among others next week.
 +
* Sasha also told us that an Nathan Sparks, an FSU graduate student, will be working on GlueX, initially doing software (he is also working on CLAS).
 +
 
 +
=Time-of-Flight Work=
 
chuck has done additional measurement
 
chuck has done additional measurement
 
on to hamamtsu pmt
 
on to hamamtsu pmt
Line 53: Line 58:
 
sipm's avoid long light guides, 1.4 m
 
sipm's avoid long light guides, 1.4 m
 
Chris Keith
 
Chris Keith
 
graduate student, working on gluex, nathan park, software work
 
working on clas as well
 

Revision as of 16:28, 7 August 2009

Location, Time

Friday, August 7, 2009
3:00 pm EDT
JLab: CEBAF Center, Room F326/7
ESNet: 8542553
EVO: direct meeting link
Conference Group: 800-377-8846, participant code: 77438230
Slides: talks can be deposited in the directory /group/halld/www/halldweb1/html/talks/2009-08 on the JLab CUE (you have to be a member of the "halld" group). This directory is accessible from the web at https://halldweb1.jlab.org/talks/2009-08/ .

Agenda

  1. Minutes from the last meeting
  2. Time-of-Flight Status
  3. Start Counter Status
  4. Action Items

Minutes

FSU: Chuck Bryant, Sasha Ostrovidov
JLab: Eugene Chudakov, Mark Ito (chair), Sascha Somov, Simon Taylor, Beni Zihlmann

Announcments

  • Sasha O. told us that Paul Eugenio is on his way to JLab. He is traveling with the FSU engineer and they will be talking to Tim Whitlatch, among others next week.
  • Sasha also told us that an Nathan Sparks, an FSU graduate student, will be working on GlueX, initially doing software (he is also working on CLAS).

Time-of-Flight Work

chuck has done additional measurement on to hamamtsu pmt 2.1 sigma = 124 ps photonis was 142 ps hamamatsu run at 1700, 1750 the maximum photonis, 300 v below nominal plan to to back to photonis 2600 nominal voltage

plateau hamamatsu left does not plateau as easily as right done with trigger paddles in middle try at the ends switch the tubes trapezoidal shape light guide used in test final design fishtail will not fit

meeting with werner, after bcal review start bending early werner submitted new version of geometry chuck's drawings a starting point for him, need to decide what he should draw next mechanical discussion support concept understand regions in drawing match up with what is in the Monte Carlo get limitations from target werner planning measurements from prototypes this month sipm's for read-out dose estimate needed, perhaps something from collimator cave (sascha) sipm's avoid long light guides, 1.4 m Chris Keith