Difference between revisions of "Start Counter Electronics Channel Maps and Cabling"
From GlueXWiki
(Created page with "* Media:ST Sector Translation Table.pdf Correspondence between FIU construction numbering and JLab as-installed numbering.") |
|||
| Line 1: | Line 1: | ||
* [[Media:ST Sector Translation Table.pdf]] Correspondence between FIU construction numbering and JLab as-installed numbering. | * [[Media:ST Sector Translation Table.pdf]] Correspondence between FIU construction numbering and JLab as-installed numbering. | ||
| + | ** The FIU paddle number is the number which was taped to the top of each scintillator bar, the channel number is the FIU sector numbering scheme, and the JLab sector number follows the conventional GlueX numbering scheme, i.e. sector 1 beginning at phi = 0 (assuming the beam is hitting you in the back of the head) and sector number increases with increasing phi. This is useful if someone ever has to disassemble/reassemble the start counter. | ||
Revision as of 16:48, 12 March 2020
- Media:ST Sector Translation Table.pdf Correspondence between FIU construction numbering and JLab as-installed numbering.
- The FIU paddle number is the number which was taped to the top of each scintillator bar, the channel number is the FIU sector numbering scheme, and the JLab sector number follows the conventional GlueX numbering scheme, i.e. sector 1 beginning at phi = 0 (assuming the beam is hitting you in the back of the head) and sector number increases with increasing phi. This is useful if someone ever has to disassemble/reassemble the start counter.
