Difference between revisions of "Runs to study systematics"
From GlueXWiki
| Line 1: | Line 1: | ||
* TAC run (Hall C should not be running), A < 2 nA, 2 shifts | * TAC run (Hall C should not be running), A < 2 nA, 2 shifts | ||
| + | |||
* Run without tungstate absorber (100 um tungstate plate positioned inside the beam before the collimator) | * Run without tungstate absorber (100 um tungstate plate positioned inside the beam before the collimator) | ||
** Run for about 2 hours, compare Compton cross section | ** Run for about 2 hours, compare Compton cross section | ||
| + | |||
* Run with a random trigger to check performance of the trigger hardware (2 hours) | * Run with a random trigger to check performance of the trigger hardware (2 hours) | ||
| + | |||
* Take data in a raw mode (1 hour) | * Take data in a raw mode (1 hour) | ||
| + | |||
* Take data at 300 nA beam current (time: TDB) | * Take data at 300 nA beam current (time: TDB) | ||
Revision as of 18:11, 21 November 2022
- TAC run (Hall C should not be running), A < 2 nA, 2 shifts
- Run without tungstate absorber (100 um tungstate plate positioned inside the beam before the collimator)
- Run for about 2 hours, compare Compton cross section
- Run with a random trigger to check performance of the trigger hardware (2 hours)
- Take data in a raw mode (1 hour)
- Take data at 300 nA beam current (time: TDB)
