Difference between revisions of "Run Planning Meeting Notes, Oct 4-Oct 10, 2018"

Revision as of 13:01, 6 October 2018

Notes from the weekend:
- Successfully tested the beam blocker. It still blocks beam
CEBAF
- Saturday vacuum problems, "whack-a-mole" restoration (magnet trips, separator problems, control cards)
Action Items
Issues
Reports
Run Plan
AOB

Notes from the previous 24 hours:
- Achieved a full run cycle of polarisation settings overnight (Go team GWU!)
- Microscope threshold scan complete
- FCal LED trigger
CEBAF:
- Hall C down for access (we do our TAC run during)
Action Items:
- Currently filed under opportunistic access:
  - target alarm thresholds
  - More oil in the CDC bubbler
- Currently opportunistic, but possibly more urgent
  - Hodoscope module
Issues:
- Transmission after trips
Reports:
- Monitoring
  - Plot Browser
- First look at rho polarisation
Run Plan:
- Week 3 Week 4
- Friday
  - TAC run
    - Hall C will be down from 7am for 6-8h
    - MCC need ~2h to set up low current, ETA 0830-0900, setup DAQ (~1h, Sasha), take data for 4-5h. (Go to 30nA & V-wire if we run out of Hall C downtime).
- Weekend and longer term
  - High rate tests of L1 trigger and DAQ
  - Rate comparison test
  - RF Recovery on Tuesday, who needs an access?
- Acc whiteboard
- Counting house whiteboard
AOB
- Trigger Spreadsheet

Notes from the previous 24 hours:
- Cryo target issue
- FCAL timing
CEBAF:
- PSS trip in North Linac
- Hall C will ramp up to 60uA end of day shift/start of swing
Action Items:
- Definition of nominal coherent peak energy
- Microscope occupancy is still unreliable - should be fixed when Richard has loaded new thresholds
- Hodoscope module playing up
- Discussion of rates
Issues:
- Cigarette butts in the indoor trash - don't!
Reports:
- Monitoring
Run Plan:
- Week 2 Week 3 Week 4
- Thursday
  - 0930 access
    - TAC run preparation, Hovanes with ARM to install the Pb converter
    - Parallel (rapid) access for Beni (CDC) and Tim (PS). Others?
    - Radcon repair to radiation monitor to fix the alarm in counting room
  - Hovanes will calibrate A.C. high gain setting (am, after access)
- Friday
  - TAC run
    - Hall C will be down from 7am for 6-8h
    - MCC need ~2h to set up low current, ETA 0830-0900, setup DAQ (~1h, Sasha), take data for 4-5h. (Go to 30nA & V-wire if we run out of Hall C downtime).
- Weekend and longer term
  - High rate tests of L1 trigger and DAQ
  - Rate comparison test
  - RF Recovery on Tuesday, who needs an access?
- Acc whiteboard
- Counting house whiteboard
AOB

@@ Line 6: / Line 6: @@
 * [https://calendar.google.com/calendar/embed?src=503o985nbesua43smquc510o8k%40group.calendar.google.com&ctz=America%2FNew_York Accel. Plan Google Calendar]
+== Monday, Oct 8 at 08:45 ==
+# Notes from the weekend:
+#*Successfully tested the beam blocker. It still blocks beam
+# CEBAF
+#*Saturday vacuum problems, "whack-a-mole" restoration (magnet trips, separator problems, control cards)
+#Action Items
+#Issues
+#Reports
+#Run Plan
+#AOB
+== Sunday, Oct 7 ==
+# No meeting
 == Saturday, Oct 6 ==
 # No meeting