Minutes-2-24-2011

February 24, 2011 FDC meeting

Agenda

1. Production (David)
   • Blue Crab status
   • Readiness review
2. Electronics (Fernando, Roger)
   • Foil production: Allflex responce
   • Other: solder for wires
3. Engineering (Bill, David, Lubomir)
   • Lessons learned from the test wire plane FDC Log Book, page 552
   • Other: epoxy
4. Chamber testing
   • Tests with the middle chamber (Lubomir)
5. Other

Minutes

Participants: Eugene, Bill, Dave, Roger, Simon, Beni, and Lubomir.

Production

- Dave: everything moved to Blue Crab (stringing table was moved there right after the meeting). We have there office with computers connected to network. Preparing for the PCB gluing. There was a problem with the lights there again. Bill regarding the stringing table: the pin rail was modified at the machine shop, ready together with the other parts to be mounted on the table at Blue Crab.

- We will have a readiness review in a month from now. Dave and Bill will work on the procedures/travelers/QA documents that are needed for the review. Beni will set up a page with the agenda, similar to that for the CDC review, where we will link all the documents. According to Eugene the review will be more technical than administrative.