Revision as of 11:25, 26 May 2011

Teleconference Time: 08:30 CST (Regina) / 10:30 EDT / 16:30 GMT+2 (Athens)

Background information

Monitoring R&D issues for the relative gain calibration and monitoring system for the calorimeters and possibly other detector systems.
Calibration Specifications Table for BCAL, FCAL, TOF and START
Calibration and Monitoring System Meetings Previous minutes

USM was contacted to expedite the LG shipment to Athens: Athens has requested 15 units, 12 for one side and 3 for the opposing side of the baby cal.
In the meanwhile, Elton will send 2 Plastic Craft LGs to Athens, and possibly small connectors (from the SiPM U-board) or at least information on the type of connectors for both LED and control board.
Christina will discuss connectors with Kappos and also whether a 90 degree LED can be used and where it can be mounted.
Zisis will have Danny sketch the concept for the LED 'channel'.

Attendees: Christina (Athens), Elton (JLab), Zisis (Regina)

@@ Line 1: / Line 1: @@
-'''<font color=red>Teleconference Time: 08:00 CST (Regina) / 10:00 EDT / 16:00 GMT+2 (Athens)</font>'''
+'''<font color=red>Teleconference Time: 08:30 CST (Regina) / 10:30 EDT / 16:30 GMT+2 (Athens)</font>'''
 * Connection: ESNET
@@ Line 11: / Line 11: @@
 = Action Items =
-# Can George calculate the % deviation from linearity on his plot?
+# USM was contacted to expedite the LG shipment to Athens: Athens has requested 15 units, 12 for one side and 3 for the opposing side of the baby cal.
-# <strike>USM should be contacted to send more LGs to Athens: Athens has requested 15 units, 12 for one side and 3 for the opposing side of the baby cal.  Regina is working on its request.</strike>
+# In the meanwhile, Elton will send 2 Plastic Craft LGs to Athens, and possibly small connectors (from the SiPM U-board) or at least information on the type of connectors for both LED and control board.
-# <strike>Christina will probe Kappos for cabling and other board issues.</strike>
+# Christina will discuss connectors with Kappos and also whether a 90 degree LED can be used and where it can be mounted.
-# BCAL Fibre location and angle, as well as mounting sequence should be flushed out. (Zisis)
+# Zisis will have Danny sketch the concept for the LED 'channel'.
 = Tentative Agenda =