Gas leak tests

From GlueXWiki
Revision as of 16:29, 18 February 2009 by Yvhaarle (Talk | contribs) (→‎Test of the feed-thru end plate glue joint)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Test of the feed-thru end plate glue joint

Gas vessel with 4 feed-thrus glued into (one side).
Gas vessel with 4 feed-thrus glued into (one side).


No leaks were found.

Preliminary conclusion

After testing 2 glue joints that were found OK. All points towards the feed-thru donut glue joint. Apparently the tolerance is too high and needs to adjusted in the order of 1-0.5 mil. This needs to be further discussed.

Retrieved from "https://halldweb1.jlab.org/wiki/index.php?title=Gas_leak_tests&oldid=11921"