FA125 Data Format June 23, 2015
From GlueXWiki
Location and Time
Room: CC L207 ??
Time: 2pm.
Remote Connection
You can connect using BlueJeans using the meeting number 589 693 655 . (Click "Expand" to the right for more details -->):
(if problems, call phone in conference room: 757-269-6460 might not be the correct number)
- To join via Polycom room system go to the IP Address: 199.48.152.152 (bjn.vc) and enter the meeting ID: 589693655.
- To join via a Web Browser, go to the page [1] https://bluejeans.com/589693655.
- To join via phone, use one of the following numbers and the Conference ID: 589693655
- US or Canada: +1 408 740 7256 or
- US or Canada: +1 888 240 2560
More information on connecting to bluejeans is here
Specific instructions for connecting via polycom:
- Turn polycom on if necessary
- With the polycom, place a call at 199.48.152.152
- Press # to enable the polycom keypad, then enter the meeting id: 589693655 and #
- You may have to unmute the microphone: #*4
- Turn the computer on if needed
Agenda
- Previous meeting (June 9, 2015)
- Status of FADC125 Firmware (report from Cody last week is in the minutes)
- Version 5.06, 23 June 2015
- Eliminating extra modes
- Parameter PG to describe pedestal gap
Useful Links
- Timing algorithm - updated to include latest revisions
- fADC125 Data Format Specification Document
- Ver 5.01 in svn, 17 Feb 2015
- Version 5.03, 11 March 2015
- Version 5.06, 23 June 2015
- Data format for 250 modes on fADC125 from Cody, Aug 15 2014
- FA250 modes 2 from Ed and Hai, Feb 18 2014
- FIRMWARE for FADC250 Ver2 ADC FPGA, Sept 2014?
- FDC_pulse_data_format
- CDC readout needs Garfield calcs
- CDC_run_985 CDC_run_970
Minutes
Present:
- Update from Cody last week - he synthesized the CDC combined mode and got some real (eventless) data through his test card using it - just headers, trigger time and trailer, he suppressed the event data just to make testing easier in these early stages. This shows that both the new daisy chain and backend architectures work. It looks like he will have to make separate CDC and FDC versions to get the firmware to fit onto the card. When he gets back he'll talk to Bryan about the driver.