Feb 9, 2011 SiPM Electrical and Cooling
From GlueXWiki
Revision as of 18:31, 2 February 2012 by Elton (Talk | contribs) (Created page with "== Action Items from previous meetings == # Populate interface cards to the ADC (Chris) # Complete 3 remaining boards for SiPM testing (Chris) # Determine if swapped bias pins w...")
Action Items from previous meetings
- Populate interface cards to the ADC (Chris)
- Complete 3 remaining boards for SiPM testing (Chris)
- Determine if swapped bias pins was accidental or in design (Chris)
- Modify design so that the samtek/ADC transition board the locking mechanism works (Chris)
- Provide cost information to Chris regarding the thermistor (Jack)
-
Check to see if files sent from Athens can be read (Jim/Chris)Yes.
Tentative Agenda
- Announcements
- Action Items
- Schedule, reporting, and manpower (Elton)
- SiPM production testing (everyone)
- Mechanical assembly (Scot)
- Mechanical (Jim)
- Mechanical drawings (Chuck)
- Temperature compensation (Jack)
- Preamp-summing (Fernando/Chris)
- SiPM testing (Ivan)
Minutes
Attending: