Calibration Dashboard
From GlueXWiki
Revision as of 05:29, 22 January 2015 by Sdobbs (Talk | contribs) (→Spring 2015 Calibration Status)
Spring 2015 Calibration Status
This table summarizes the status of the calibrations that have been stored in the CCDB.
Last Updated -- 20 Jan. 2015
- red - This category has not been calibrated
- yellow - Calibrations have been partially done, or done with cosmic ray or other non-photon beam data
- green - Calibrations have been done with photon beam data
Detector | Base Time | fADC E scale | fADC gains | fADC timing | TDC timing | TDC timewalk | low-level reco. obj. | high-level reco. obj. |
---|---|---|---|---|---|---|---|---|
BCAL | N/A | 1 | 1 | |||||
CDC | N/A | N/A | ||||||
FCAL | 1 | N/A | N/A | |||||
FDC | N/A | N/A | ||||||
PS/PSC | ||||||||
Start Counter | 1 | |||||||
TAGH | 1 | 1 | ||||||
TAGM | 1 | 1 | ||||||
TOF | 1 |
Notes:
- "Base time" refers to the relative timing between different detectors.
- The fADC and TDC categories refer to per-channel calibrations.
- The high-level reconstruction objects are the final inputs to a physics analysis. The low-level reconstruction objects are whatever objects are built from the calibrated hits and used to build the high-level objects.