Run Table
From GlueXWiki
Click on the 'edit' tab above to record an entry in the table below.
<- BCAL -> Run No Date Time Curr. Config. Trigger Tagger ADC TDC Cell-3 Cell-8 Comments 3000 Sep24 13:40 5 Rotation ok ok ok ok 22537 2439 sample row Note Added: Runs taken at 1nA, 2x10-5 radiator, 2.6 mm collimator, unless otherwise stated. 2301 Sep23 11:11 ? 90deg, nominal height 2306 Sep23 13:08 " 2311 Sep23 16:11 " 2312 Sep23 17:08 " 2313 Sep23 18:16 " 2314 Sep23 19:38 90deg (i.e.normal to beam) 2315 Sep23 21:06 105deg 2316 Sep23 21:51 119.5deg(max) 2317 Sep23 23:08 115deg 2318 Sep24 06:04(?!) 90deg, beam 3cm low (+3cm) 2319 Sep24 02:12 +3cm Vertical 2322 Sep24 04:46 +2cm " 2323 Sep24 06:46 +1cm " 2324 Sep24 09:10 -1cm " 2332 Sep24 12:42 -2cm " 2333 Sep24 14:06 -3cm (nominal, see elog#110 for details) 2334 Sep24 15:07 -1.2cm (nominal center), trigger bit 4. 2335 Sep24 17:33 1.0 Z=-97.8cm (beam closer to South end), 2336 Sep24 18:40 1.0 Z=-50.3cm 2337 Sep24 21:53 1.0 Z=0cm 3x0.5mm lead layers 2338 Sep24 22:55 1.0 Z=0cm 6x0.5mm lead layers 2339 Sep24 23:46 1.0 Z=0cm garbage 2340 Sep24 23:55 1.0 Z=0cm 8x0.5mm lead layers 2341 Sep25 01:14 0.5 Z=0 no prerad. theta=90 2342 Sep25 02:27 5.0 Z=0 no prerad. theta=90 2343 Sep25 03:37 10 Z=0 no prerad theta=90 2344 Sep25 04:55 1.0 T4, T6, T7/10000, Z=0 no prerad theta=90 (nominal trigger) 2345 Sep25 05:45 1.0 T4/100,T6,T7/10000, no rad, theta=90 (short run) 2346 Sep25 05:50 1.0 MOR: T1/1000, T6, T7/10000, no rad, theta=90 2347 Sep25 07:45 1.0 BcalOR: T2, T6, T7/10000, no rad, theta=90 2348 Sep25 08:30 1.0 BcalAND: T3, T6, T7/10000, no rad, theta=90 2349 Sep25 09:10 1.0 MOR.and.BcalOR: T4, T6, T7/10000, no rad, theta=90 (nominal) 2350 Sep25 09:50 1.0 MOR.and.BcalAND: T5, T6, T7/10000, no rad, theta=90 2352 Sep25 Pedestal run 2353 Sep25 11:08 1.0 T4, T6, T7/1000, Length scan, +50cm. 2354 Sep25 12:09 1.0 T4, T6, T7/1000, Length scan, +100 cm. 2355 Sep25 Beam off 2356 Sep25 Beam off 2357 Sep25 Beam off 2358 Sep25 Cosmic ray 2359 Sep25 15:45 1.0 12.6 degrees - nominal height (Y=0),Z=0 1M events 2360 Sep25 15:55 Pedestals (short run) 2361 Sep25 16:00 1.0 40 degrees - nominal height (Y=0),Z=0 4M events 2362 Sep25 16:25 1.0 40 degrees - nominal height (Y=0),Z=0 4M events 2363 Sep25 17:22 1.0 40 degrees - Y=-1.2 cm (default height from now on), Z=0, 10M events 2364 NO RUN 2365 Sep25 18:04 1.0 Pedestals (7.6M events) 2366 NO RUN 2367 Sep25 18:17 1.0 10 degrees 10M events 2368 Sep25 19:12 1.0 20 degrees 11M events 2369 Sep25 20:08 1.0 30 degrees 10.5 M events 2370 Sep25 21:34 1.0 Z=-50 cm, 10 degrees (no good) 2371 Sep25 21:44 1.0 z=-50 cm, 10 degrees
- Curr. refers to beam current.
- Configuration description options are shown below and are reflected in the Run Plan and on e-Log entry 112:
- Commissioning
- Rotation (platform, at 90 degrees, center of BCAL)
- Length (platform, at 90 degrees, length scan)
- Height (platform, at 90 degrees, up/down scan)
- Converter (platform, at 90 degrees, center of BCAL)
- Current (platform, at 90 degrees, beam current study)
- Trigger (platform, at 90 degrees, trigger studies)
- Steep (alcove, at 10-50 degrees, at lengths intercepting full depth of BCAL)
- Leakage (alcove, at 10-25 degrees, at lengths allowing showers to leak out of end of BCAL)
- Trigger, Tagger, BCAL-ADC, BCAL-TDC columns require checking ALL the spectra in the ROOT histos.
- The Cell columns reflect the number of counts/entries in the ANDed (North AND South) cell ADC spectrum. This provide a rough indication of hits on the particular cell.