Run Table
From GlueXWiki
Click on the 'edit' tab above to record an entry in the table below.
<- BCAL -> Run No Date Time Curr. Config. Trigger Tagger ADC TDC Cell-3 Cell-8 Comments 3000 Sep24 13:40 5 Rotation ok ok ok ok 22537 2439 sample row 2301 Sep23 11:11 ? 90deg, nominal height 2306 Sep23 13:08 " 2311 Sep23 16:11 " 2312 Sep23 17:08 " 2313 Sep23 18:16 " 2314 Sep23 19:38 90deg (i.e.normal to beam) 2315 Sep23 21:06 105deg 2316 Sep23 21:51 119.5deg(max) 2317 Sep23 23:08 115deg 2318 Sep24 06:04(?!) 90deg, beam 3cm low (+3cm) 2319 Sep24 02:12 +3cm Vertical 2322 Sep24 04:46 +2cm " 2323 Sep24 06:46 +1cm " 2324 Sep24 09:10 -1cm " 2332 Sep24 12:42 -2cm " 2333 Sep24 14:06 -3cm (nominal, see elog#110 for details) 2334 Sep24 15:07 -1.2cm (nominal center), trigger bit 4. 2335 Sep24 17:33 1.0 Z=-97.8cm (beam closer to South end), 2336 Sep24 18:40 1.0 Z=-50.3cm 2337 Sep24 ????? 1.0 Z=+50.0cm North
- Curr. refers to beam current.
- Configuration description options are shown below and are reflected in the Run Plan and on e-Log entry 112:
- Commissioning
- Rotation (platform, at 90 degrees, center of BCAL)
- Length (platform, at 90 degrees, length scan)
- Height (platform, at 90 degrees, up/down scan)
- Converter (platform, at 90 degrees, center of BCAL)
- Current (platform, at 90 degrees, beam current study)
- Trigger (platform, at 90 degrees, trigger studies)
- Steep (alcove, at 10-50 degrees, at lengths intercepting full depth of BCAL)
- Leakage (alcove, at 10-25 degrees, at lengths allowing showers to leak out of end of BCAL)
- Trigger, Tagger, BCAL-ADC, BCAL-TDC columns require checking ALL the spectra in the ROOT histos.
- The Cell columns reflect the number of counts/entries in the ANDed (North AND South) cell ADC spectrum. This provide a rough indication of hits on the particular cell.