Difference between revisions of "Preliminary dimensions"
From GlueXWiki
m |
m |
||
| Line 2: | Line 2: | ||
[[Image:endplate_newprototype.jpg|thumb|none|400px]] | [[Image:endplate_newprototype.jpg|thumb|none|400px]] | ||
* end plates: 9x8 cm2 | * end plates: 9x8 cm2 | ||
| − | * "upstream" end plate: | + | * "upstream" end plate: 9.53 mm thick Al |
| − | * "downstream" end plate: | + | * "downstream" end plate: 6.35 mm thick Carbon fiber |
* Outer shell has to be 0.015 X_0 thick. Probably we'll use 5.1 mm thick Plexiglas. | * Outer shell has to be 0.015 X_0 thick. Probably we'll use 5.1 mm thick Plexiglas. | ||
Revision as of 10:36, 11 August 2008
- 24, 30 cm long straws in 6 layers - honeycomb packed
- end plates: 9x8 cm2
- "upstream" end plate: 9.53 mm thick Al
- "downstream" end plate: 6.35 mm thick Carbon fiber
- Outer shell has to be 0.015 X_0 thick. Probably we'll use 5.1 mm thick Plexiglas.
