|
|
Line 1: |
Line 1: |
| | | |
| [[Trigger Installation Activities | Trigger Installation Activities]] | | [[Trigger Installation Activities | Trigger Installation Activities]] |
− |
| |
− | The main installation and trigger activities can be organized into the three main phases:
| |
− |
| |
− | : '''1. Initial installation phase, where only a few crates with electronics will be installed and connected to the sub-detector.'''
| |
− | :* Run stand alone DAC for each sub-detector. Start calibration of fadc pedestals, implementing calibration triggers and start tuning trigger parameters
| |
− | :: - 4 TI boards were populated with 4 additional transceivers and can be used as master-TIs handling the clock and trigger distribution for up to 6 crates
| |
− | :: - One extra transceiver was added to 4 TI boards. They can be used as a master-TI for small sub-systems (like the microscope, SC, PS)
| |
− | : '''2. Final Detector installation'''
| |
− | :* Use the global trigger distribution (the global trigger and the trigger distribution crates)
| |
− | :: - Up to 4 sub-systems can run in parallel sharing the TS (TS partitioning).
| |
− | :: - Calibrate DAQ (readout windows, pedestals, thresholds, etc.) and trigger parameters (offsets, threshold, etc.)
| |
− | : '''3. Detector Calibration with the Beam'''
| |
− |
| |
− |
| |
− |
| |
− | <span style="color:#800000;font-size:120%"> Phase I (Initial Installation) </span>
| |
− |
| |
− |
| |
− | '''BCAL'''
| |
− |
| |
− | Can run up to 6 crates with the master TI
| |
− | * Pulser for pedestals calibration
| |
− | : Can be generated by the master TI
| |
− | * Cosmic
| |
− | : Generated by CTP in each crate. Possibility to generate the trigger for each BCAL module.
| |
− | : ID of the 'fired' module is sent to the SSP along with the energy sum.
| |
− | : The trigger is sent from the SSP front pannel to the master TI.
| |
− | : Algorithm is being implemented.
| |
− | * LED Pulser
| |
− | : Initiated by 2 CAEN 1495 board (24 TTL outputs)
| |
− | : LED pattern programmed through EPICS
| |
− | : LVDS output is used as an external trigger for the master TI
| |
− |
| |
− |
| |
− | '''FCAL'''
| |
− |
| |
− | Can run up to 6 crates with the master TI
| |
− | * Pulser for pedestals calibration
| |
− | * Cosmic
| |
− | : Energy summed in the crates (CTP). Energy threshold set at SSP.
| |
− | : The trigger is sent from the SSP front pannel to the master TI.
| |
− | * LED Pulser
| |
− | : The same as for the BCAL
| |
− |
| |
− |
| |
− | ''' CDC '''
| |
− |
| |
− | Can run up to 6 crates with the master TI
| |
− | * External trigger from paddle scintillators
| |
− | : Use as input to the master TI
| |
− |
| |
− |
| |
− | '''FDC '''
| |
− |
| |
− | Can run up to 6 crates with the master TI
| |
− | * External trigger from the paddle scintillators
| |
− | : Use as input to the master TI
| |
− |
| |
− |
| |
− | '''TOF '''
| |
− |
| |
− | One master TI to read out two crates
| |
− | * Pulser for pedestal calibration
| |
− | * Cosmic (?)
| |
− |
| |
− |
| |
− | '''SC '''
| |
− | * Pulser for pedestal calibration
| |
− | * Cosmic
| |
− | : Hit-bit trigger implemented on the CTP
| |
− | : Algorithm is being implemented.
| |
− |
| |
− |
| |
− | '''PS/PSC'''
| |
− | * Pulser for pedestal calibration and SiPMs calibration
| |
− | * Cosmic
| |
− | : Hit-bit trigger implemented on the CTP
| |
− |
| |
− |
| |
− | ''' Tagger Hodoscope '''
| |
− |
| |
− | One master TI to read out two crates
| |
− | * Pulser for pedestal calibration
| |
− | * Cosmic
| |
− | : Hit-bit trigger implemented on the CTP
| |
− |
| |
− |
| |
− | ''' Microscope'''
| |
− |
| |
− | One master TI to read out two crates
| |
− | * Pulser for pedestal calibration and SiPM calibration
| |
− | * Cosmic (?)
| |
− | : Hit-bit trigger implemented on the CTP
| |
− |
| |
− |
| |
− | <span style="color:#800000;font-size:120%"> Phase II (Final Detector Installation) </span>
| |
− |
| |
− | Most trigger types will be implemented on the GTP/TS modules
| |
− | * Random trigger
| |
− | * Cosmic trigger algorithm for BCAL (FCAL)
| |
− | : BCAL cosmic trigger will be used to readout CDC/FDC
| |
− | * Hit bit pattern algorithms for the microscope, fixed array, and SC
| |
− | * Track-based algorithm for the TOF
| |
− | * PS coincidence trigger
| |
− | * Physics trigger implemented & checked with the play back mode (possibly break down into several trigger types)
| |
− |
| |
− |
| |
− | <span style="color:#800000;font-size:120%"> Phase III (Beam) </span>
| |
− |
| |
− | Initial triggers:
| |
− | * Tagger
| |
− | * Tagger + SC
| |
− | * Tagger + (SC) + TOF
| |
− | * Tagger + FCAL/BCAL
| |