Difference between revisions of "May 2, 2013 SiPM Electrical and Cooling"
From GlueXWiki
(→Action Items from previous meetings) |
(→Action Items from previous meetings) |
||
Line 2: | Line 2: | ||
# Interface with Tom for optimum placement of tubing in cooling plate during gluing. Provide a cover plate to assist with alignment. (Chris and Nic) | # Interface with Tom for optimum placement of tubing in cooling plate during gluing. Provide a cover plate to assist with alignment. (Chris and Nic) | ||
− | # Mount one of the completed assemblies onto a module in the ESB to evaluate any possible interferences with cables. (Chris and Nic) | + | # Mount one of the completed assemblies onto a module in the ESB to evaluate any possible interferences with cables. (Chris and Nic)\ |
+ | # Check on status of returning "borrowed" SiPM (Elton) | ||
== Tentative Agenda == | == Tentative Agenda == |
Revision as of 18:02, 25 April 2013
Action Items from previous meetings
- Interface with Tom for optimum placement of tubing in cooling plate during gluing. Provide a cover plate to assist with alignment. (Chris and Nic)
- Mount one of the completed assemblies onto a module in the ESB to evaluate any possible interferences with cables. (Chris and Nic)\
- Check on status of returning "borrowed" SiPM (Elton)
Tentative Agenda
- Announcements
- Action Items
- Light guides (Tina)
- SiPM production testing (Yi)
- Mechanical assembly (Jim)
- Electronic boards and SiPM sorting (Fernando and Chris)
Minutes
Attending: