Revision as of 16:48, 28 February 2013

February 28, 2013 FDC meeting

Agenda

Production Construction Tracking (Dave)
- Spare parts
- Spare wire plane testing
- Package #2 status
Rebaselining update [1](Lubomir)
Engineering (Bill)
- Cooling system test
Electronics (Chris, Nick)
Tests at EEL126 FDC E-log (Beni)
Other

@@ Line 17: / Line 17: @@
 = Minutes =
-Participants: Eugene, Bill, Dave, Chris, Nick, Simon, Beni, and Lubomir.
+Participants: Eugene, Dave, Chris, Nick, Beni, and Lubomir.
 == Production ==
-- Dave for the spare parts: wire frame #3 (old) was tested without HV caps (580/-50nA at 2100/-500V) and now Anatoly is soldering them. Last wire frame (#32) was strung by Casey and Dave, Casey is gluing the wires now, tomorrow will come soldering and tension measurements. Don't need to convert type-2 to type-1 cathode frame (mill the O-ring groove) we have enough; the one that was deformed was used and looks OK. No need for extra spacer rings, the ones on the full-scale prototype can be used (Bill). Tina will come over the weekend to work on the last cathodes. Expect to finish with the spare part production in March.
+- Dave for the spare parts:
 - Lubomir for package #2: completely tested, oxygen went down to 170ppm. Started installing the grounding, 75% done. It is now on the mounting table