Difference between revisions of "Nov 15, 2018 Calorimeter"
From GlueXWiki
(→Action Items) |
(→Action Items) |
||
Line 19: | Line 19: | ||
# FCAL: Cross check MC changes by Richard to make sure that gains are not affected in both Geant3 and Geant4 (Matt/IHEP) | # FCAL: Cross check MC changes by Richard to make sure that gains are not affected in both Geant3 and Geant4 (Matt/IHEP) | ||
# Fix FCAL online monitoring plugin to properly plot low level digi quantities in 2D displays. 2D display of pedestal is hard to get because occupancy plot is filled in a different loop. (Tolga) | # Fix FCAL online monitoring plugin to properly plot low level digi quantities in 2D displays. 2D display of pedestal is hard to get because occupancy plot is filled in a different loop. (Tolga) | ||
− | -Tolga: Will | + | -Tolga: Will explain progress after analyzing and playing with JEventProcessor plugin.Cannot promise final plots unfortunately due to various reasons. |
#Complete after new launch | #Complete after new launch | ||
# From Mike's work: -cos(phi) type dependence in the data and a phi dependence at the downstream end of the bcal. See [[Sep 21, 2017 Calorimeter]] Meeting. | # From Mike's work: -cos(phi) type dependence in the data and a phi dependence at the downstream end of the bcal. See [[Sep 21, 2017 Calorimeter]] Meeting. |
Revision as of 05:19, 15 November 2018
Meeting Time: 11:00 a.m.
- To join via a Web Browser, go to the page [1] https://bluejeans.com/907185247.
- To join via Polycom room system go to the IP Address: 199.48.152.152 (bjn.vc) and enter the meeting ID: 907185247.
- To join via phone, use one of the following numbers and the Conference ID: 907185247.
- US or Canada: +1 408 740 7256 or
- US or Canada: +1 888 240 2560
- Upon connection all microphones are automatically muted. To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.
- More information on connecting to bluejeans is available.
Contents
Participant Direct Lines
- JLab Phone in CC L207 is 757-269-7084 (usual room)
- JLab Phone: in CC F326 is 757-269-6460
- Phone in the Regina Video-conference Suite is 306-585-4204
- Athens Phone: in Christina's office is 011-30-210-727-6947
Action Items
- FCAL: Cross check MC changes by Richard to make sure that gains are not affected in both Geant3 and Geant4 (Matt/IHEP)
- Fix FCAL online monitoring plugin to properly plot low level digi quantities in 2D displays. 2D display of pedestal is hard to get because occupancy plot is filled in a different loop. (Tolga)
-Tolga: Will explain progress after analyzing and playing with JEventProcessor plugin.Cannot promise final plots unfortunately due to various reasons.
- Complete after new launch
- From Mike's work: -cos(phi) type dependence in the data and a phi dependence at the downstream end of the bcal. See Sep 21, 2017 Calorimeter Meeting.
Goals for Calorimetry Group
- Determine preliminary photon reconstruction efficiencies as a function of E, phi and theta in data and simulation with a point-to-point precision of at least 5%.
- Measure systematics of pi0/eta mass calibration as a function of detector position to a precision of at east 5 MeV.
- Demonstrate agreement of photon reconstruction efficiency and resolution between data and simulation as a function of E, phi and theta to within 5%.
References
- FCAL HDFCAL log book
- BCAL HDBCAL log book
Tentative Agenda
- Announcements
- Action Items
- Run Updates
- FCAL
- BCAL
- Calibrations
- BCAL timing: Mark has calibrated the BCAL timing offsets up to run up to run 51377.
- Reconstruction and Simulation
- Log Entry 3621347 FCAL Non-linear Response in MC (Matt)
- Monitoring
- NIM articles
- Any other business
Minutes
Attending: