Difference between revisions of "Barrel Calorimeter"
From GlueXWiki
Line 1: | Line 1: | ||
An example of how to start DAQ for the stand alone BCAL (four north or south crates) with the external pulser connected to the master TI. | An example of how to start DAQ for the stand alone BCAL (four north or south crates) with the external pulser connected to the master TI. | ||
# Login to gluon49 under hdops | # Login to gluon49 under hdops | ||
− | # source /gluex/Subsystems/BCAL/setupcoda3 | + | ssh hdops@gluon49 |
+ | # Load the environment | ||
+ | source /gluex/Subsystems/BCAL/setupcoda3 | ||
# Start DAQ for 4 north or south crates: '''bcal_N4_start''' or '''bcal_S4_start''' | # Start DAQ for 4 north or south crates: '''bcal_N4_start''' or '''bcal_S4_start''' | ||
#: terminate all DAQ processes '''bcal_N4_exit''' | #: terminate all DAQ processes '''bcal_N4_exit''' |
Revision as of 16:38, 2 April 2014
An example of how to start DAQ for the stand alone BCAL (four north or south crates) with the external pulser connected to the master TI.
- Login to gluon49 under hdops
ssh hdops@gluon49
- Load the environment
source /gluex/Subsystems/BCAL/setupcoda3
- Start DAQ for 4 north or south crates: bcal_N4_start or bcal_S4_start
- terminate all DAQ processes bcal_N4_exit
- Choose configuration: Configurations-->Coda Config-->bcal_s4 (or bcal_n4)
- Settings in the Run Control (you have to set these variables once if you edit coda configuration with jcedit)
- Set User --> Runtime Variables --> Config File to /gluex/Subsystems/BCAL/bcal_pulser_ti/pulse
- Set User --> Runtime Variables --> List --> %(CODA_ROL) to /gluex/release/0.1/src/rol/bcal_base_ti
- FADC250 configuration files are located in /gluex/Subsystems/BCAL/bcal_pulser_ti
- Data output: /gluex/Subsystems/BCAL/data/south4
- /gluex/Subsystems/BCAL/data/north4 (default)
- Due to some glitches in the firmware you have to start run first before enabling external triggers (will be fixed)