Difference between revisions of "Active Collimator Prototyping"
From GlueXWiki
Senderovich (Talk | contribs) (→Instrumented Collimator System Design) |
(→Instrumented Collimator System Design) |
||
Line 8: | Line 8: | ||
The PMT-5R amplifiers and F-100PS power supplies are manufactured by Advanced Research Instruments Corporation.[http://www.aricorp.com] <br> | The PMT-5R amplifiers and F-100PS power supplies are manufactured by Advanced Research Instruments Corporation.[http://www.aricorp.com] <br> | ||
* [[media:PMT-5Rresp.png|Measured response spectra in different gain modes]] | * [[media:PMT-5Rresp.png|Measured response spectra in different gain modes]] | ||
+ | |||
+ | == Notes from meetings with Accelerator Group == | ||
== Instrumented Collimator Prototyping == | == Instrumented Collimator Prototyping == |
Revision as of 11:02, 8 February 2013
Instrumented Collimator System Design
The instrumented collimator system design summarizes the components and interconnects for a device.
Collimator system design xfig file
The PMT-5R amplifiers and F-100PS power supplies are manufactured by Advanced Research Instruments Corporation.[1]
Notes from meetings with Accelerator Group
Instrumented Collimator Prototyping
Proposal for active collimator parasitic beam test with g13
- Installation notes for active collimator beam test 2007
- Results with the active collimator in the Hall B photon beam
- Results from the 2012 Hall B beam test: