Veto counter

From GlueXWiki
Revision as of 16:39, 7 July 2006 by Elton (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

I propose to use the Radphi UPV counter #6 for our veto counter immediately downstream of the photon profile monitor. The counter is 35x18x0.5 cm^3. The divider has one SHV connector for HV and one Lemo connector for the signal. It is probably easier to support it in a vertical position. I gave it to Pete Hemler for use to design the support frame.