Difference between revisions of "Sweep magnet 2"
From GlueXWiki
(→Sweep2 System Design) |
(→Sweep Magnet #2 Power supply) |
||
| Line 37: | Line 37: | ||
| − | I asked Bill Merz to recommend a power supply for this magnet. He | + | I asked Bill Merz to recommend a power supply for this magnet. He a few companies [[file:billMerzMail|Original mail from Bill]] . |
Based on this I decided to base the preliminary design on the GenSys power supply which is the newer version | Based on this I decided to base the preliminary design on the GenSys power supply which is the newer version | ||
| − | of the lambda power supply. | + | of the lambda power supply. |
| − | + | ||
| − | + | ||
| − | + | ||
== Sweep2 System Design == | == Sweep2 System Design == | ||
Revision as of 11:40, 21 April 2009
Contents
Sweep Magnet #2
The magnet which we will use for the second sweep is a DW magnet on permanent load from the FEL group.
The drawings set for the magnet is here: | Dw Magnet
Characteristics of the DW Magnet
| Parameter | Value |
|---|---|
| Design Field | 0.248 T |
| Effective Length | 0.408 m |
| Max Current | 200 A |
| Max Voltage drop | 11 V |
| LCD water | 0.64 gpm @ 80 psi for a 21° F rise |
| Magnet gap | 2.00 inches |
| Gap Width | 8.4 inches |
Sweep Magnet #2 Power supply
I asked Bill Merz to recommend a power supply for this magnet. He a few companies Original mail from Bill . Based on this I decided to base the preliminary design on the GenSys power supply which is the newer version of the lambda power supply.
Sweep2 System Design
