Run Table

From GlueXWiki
Revision as of 19:15, 25 September 2006 by Elton (Talk | contribs)

Jump to: navigation, search

Click on the 'edit' tab above to record an entry in the table below.

                                                 <-       BCAL         ->
Run No Date  Time  Curr. Config.  Trigger Tagger ADC  TDC  Cell-3  Cell-8  Comments
 3000  Sep24 13:40   5   Rotation   ok      ok    ok   ok   22537   2439   sample row

Note Added: Runs taken at 1nA, 2x10-5 radiator, 2.6 mm collimator, unless otherwise stated.

 2301  Sep23 11:11  ?    90deg, nominal height
 2306  Sep23 13:08       "
 2311  Sep23 16:11       "
 2312  Sep23 17:08       "
 2313  Sep23 18:16       "
 2314  Sep23 19:38       90deg (i.e.normal to beam)
 2315  Sep23 21:06       105deg
 2316  Sep23 21:51       119.5deg(max)
 2317  Sep23 23:08       115deg

 2318  Sep24 06:04(?!)   90deg, beam 3cm low (+3cm)
 2319  Sep24 02:12       +3cm Vertical
 2322  Sep24 04:46       +2cm  "
 2323  Sep24 06:46       +1cm  "
 2324  Sep24 09:10       -1cm  "
 2332  Sep24 12:42       -2cm  "
 2333  Sep24 14:06       -3cm (nominal, see elog#110 for details) 
 2334  Sep24 15:07       -1.2cm (nominal center), trigger bit 4.
 2335  Sep24 17:33  1.0  Z=-97.8cm (beam closer to South end), 
 2336  Sep24 18:40  1.0  Z=-50.3cm
 2337  Sep24 21:53  1.0  Z=0cm 3x0.5mm lead layers
 2338  Sep24 22:55  1.0  Z=0cm 6x0.5mm lead layers
 2339  Sep24 23:46  1.0  Z=0cm garbage 
 2340  Sep24 23:55  1.0  Z=0cm 8x0.5mm lead layers
 2341  Sep25 01:14  0.5  Z=0 no prerad. theta=90
 2342  Sep25 02:27  5.0  Z=0 no prerad. theta=90
 2343  Sep25 03:37  10   Z=0 no prerad  theta=90
 2344  Sep25 04:55  1.0  T4, T6, T7/10000, Z=0 no prerad  theta=90 (nominal trigger)
 2345  Sep25 05:45  1.0  T4/100,T6,T7/10000, no rad, theta=90 (short run)
 2346  Sep25 05:50  1.0  MOR: T1/1000, T6, T7/10000, no rad, theta=90
 2347  Sep25 07:45  1.0  BcalOR: T2, T6, T7/10000, no rad, theta=90
 2348  Sep25 08:30  1.0  BcalAND: T3, T6, T7/10000, no rad, theta=90
 2349  Sep25 09:10  1.0  MOR.and.BcalOR: T4, T6, T7/10000, no rad, theta=90 (nominal)
 2350  Sep25 09:50  1.0  MOR.and.BcalAND: T5, T6, T7/10000, no rad, theta=90
 2352  Sep25             Pedestal run
 2353  Sep25 11:08  1.0  T4, T6, T7/1000, Length scan, +50cm.
 2354  Sep25 12:09  1.0  T4, T6, T7/1000, Length scan, +100 cm.
 2355  Sep25        Beam off                
 2356  Sep25        Beam off
 2357  Sep25        Beam off
 2358  Sep25             Cosmic ray
 2359  Sep25 15:45  1.0  12.6 degrees - nominal height (Y=0),Z=0 1M events 
 2360  Sep25 15:55       Pedestals (short run)
 2361  Sep25 16:00  1.0  40 degrees - nominal height (Y=0),Z=0 4M events
 2362  Sep25 16:25  1.0  40 degrees - nominal height (Y=0),Z=0 4M events
 2363  Sep25 17:22  1.0  40 degrees - Y=-1 cm (default height from now on), Z=0, 10M events
 2364  NO RUN 
 2365  Sep25 18:04  1.0  Pedestals (7.6M events)
 2366  NO RUN
 2367  Sep25 18:17  1.0  10 degrees  10M events
 2368  Sep25 19:12  1.0  20 degrees


  • Curr. refers to beam current.
  • Configuration description options are shown below and are reflected in the Run Plan and on e-Log entry 112:
    • Commissioning
    • Rotation (platform, at 90 degrees, center of BCAL)
    • Length (platform, at 90 degrees, length scan)
    • Height (platform, at 90 degrees, up/down scan)
    • Converter (platform, at 90 degrees, center of BCAL)
    • Current (platform, at 90 degrees, beam current study)
    • Trigger (platform, at 90 degrees, trigger studies)
    • Steep (alcove, at 10-50 degrees, at lengths intercepting full depth of BCAL)
    • Leakage (alcove, at 10-25 degrees, at lengths allowing showers to leak out of end of BCAL)
  • Trigger, Tagger, BCAL-ADC, BCAL-TDC columns require checking ALL the spectra in the ROOT histos.
  • The Cell columns reflect the number of counts/entries in the ANDed (North AND South) cell ADC spectrum. This provide a rough indication of hits on the particular cell.