Difference between revisions of "Offline Monitoring Data Validation PrimEx"

From GlueXWiki
Jump to: navigation, search
Line 34: Line 34:
 
*  2 - approved long/"mode 8" data
 
*  2 - approved long/"mode 8" data
 
*  3 - calibration / systematic studies
 
*  3 - calibration / systematic studies
 +
 +
 +
 +
= Checklist =
 +
 +
[https://docs.google.com/spreadsheets/d/11PGYXnAsf3dn2zQYgOP521qoIrESjc4yDrw3EuLc7Yo/edit?usp=sharing Example Monitoring Spreadsheet]
 +
 +
Reference run for 2017-01: 30780
 +
 +
Reference run for 2018-01: 40933/4
 +
 +
Reference run for 2018-08: 51388
 +
 +
Reference run for 2019-11: 71463 (150 nA), 71469 (250 nA), 71724 (350 nA)  [for now!]
 +
 +
===General Notes===
 +
* Diamond and amorphous (AMO) runs have different beam energy spectra, which leads differences in reaction yields distributions which depend on the kinematics of the produced particles.
 +
* [https://halldweb.jlab.org/wiki/index.php/RunPeriod-2019-11_Validation#Monitoring_Launch_Checks The list of experts on different detector/calibration]
 +
 +
== 350 nA runs ==
 +
 +
===BCAL===
 +
* Check Occupancy - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/bcal_occupancy.png link] ]
 +
* Check Hit Efficiency - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/bcal_hist_eff.png link] ]
 +
* Check Recon. BCAL 1 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_BCALReconstruction_p1.png link] ]
 +
* Check Recon. BCAL 2 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_BCALReconstruction_p2.png link] ]
 +
* Check BCAL Matching - Reference:  [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_Matching_BCAL.png link] ]
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''BCAL Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/bcal_occupancy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/bcal_occupancy.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/bcal_hist_eff.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/bcal_hist_eff.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_BCALReconstruction_p1"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_BCALReconstruction_p1" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_BCALReconstruction_p2.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_BCALReconstruction_p2.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_Matching_BCAL.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_Matching_BCAL.png" height="200"/></a>
 +
</html>
 +
</div>
 +
</div>
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''BCAL Notes'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
The BCAL is used to measure the energy and time of showers.
 +
The energy is vital for the neutrals.  But it’s also used for charged particles to do PID.
 +
<br />
 +
BCAL Matching: These plots are for charged particles that are tracked in the drift chambers and projected to the BCAL. The z position along the BCAL can be calculated using the time difference between upstream and downstream hits and compared to the extrapolated position using the drift chambers. <br />
 +
BCAL/Track Delta z = (z determined from time of up - down hits in BCAL) - (z determined from the extrapolation of tracks in the drift chambers)
 +
projected BCAL Hit-Z = z determined by extrapolating tracks in the drift chambers to the BCAL.
 +
The match rate is the ratio of (number of hits in the BCAL that match the extrapolation of tracks in the drift chamber) / (number of tracks in the drift chamber that point at the BCAL). 
 +
</html>
 +
 +
</div>
 +
</div>
 +
 +
===CDC===
 +
* Check Occupancy - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver24/Run072745/CDC_occupancy.png link] ]
 +
* Check Time-to-distance - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver24/Run072745/HistMacro_CDCTimeToDistance.png link] ]
 +
* Check dE/dx - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver24/Run072745/CDC_dedx.png  link] ]
 +
 +
* Check Efficiency- Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver24/Run072745/CDC_eff.png link] ]
 +
 +
<!--
 +
* Check CDC ROC amp - Reference: [ [https://halldweb.jlab.org/work/halld2/calibration/RunPeriod-2018-08/mon_ver08/Run071724/verify/verify_CDC_roc_amp.png link] ]
 +
* Check CDC ROC netamp - Reference: [ [https://halldweb.jlab.org/work/halld2/calibration/RunPeriod-2018-08/mon_ver08/Run071724/verify/verify_CDC_roc_netamp.png link] ]
 +
* Check CDC ROC hits - Reference: [ [https://halldweb.jlab.org/work/halld2/calibration/RunPeriod-2018-08/mon_ver08/Run071724/verify/verify_CDC_roc_hits.png link] ]
 +
* Check CDC rawtime vs strawnum. - Reference: [ [https://halldweb.jlab.org/work/halld2/calibration/RunPeriod-2018-08/mon_ver08/Run071724/verify/verify_CDC_rawtime_vs_strawnum.png    link] ]
 +
-->
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''CDC Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver24/Run072745/CDC_occupancy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver24/Run072745/CDC_occupancy.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver24/Run072745/HistMacro_CDCTimeToDistance.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver24/Run072745/HistMacro_CDCTimeToDistance.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver24/Run072745/CDC_dedx.png""><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver24/Run072745/CDC_dedx.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver24/Run072745/CDC_eff.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver24/Run072745/CDC_eff.png" height="200"/></a>
 +
 +
 +
<!--
 +
<a href="/work/halld2/calibration/RunPeriod-2018-01/ver18/Run042577/verify/verify_CDC_roc_amp.png"><img src="/work/halld2/calibration/RunPeriod-2018-01/ver18/Run042577/verify/verify_CDC_roc_amp.png" height="200"/></a>
 +
<a href="/work/halld2/calibration/RunPeriod-2018-01/ver18/Run042577/verify/verify_CDC_roc_netamp.png"><img src="/work/halld2/calibration/RunPeriod-2018-01/ver18/Run042577/verify/verify_CDC_roc_netamp.png" height="200"/></a>
 +
<a href="/work/halld2/calibration/RunPeriod-2018-01/ver18/Run042577/verify/verify_CDC_roc_hits.png"><img src="/work/halld2/calibration/RunPeriod-2018-01/ver18/Run042577/verify/verify_CDC_roc_hits.png" height="200"/></a>
 +
<a href="/work/halld2/calibration/RunPeriod-2018-01/ver18/Run042577/verify/verify_CDC_rawtime_vs_strawnum.png"><img src="/work/halld2/calibration/RunPeriod-2018-01/ver18/Run042577/verify/verify_CDC_rawtime_vs_strawnum.png" height="200"/></a>
 +
-->
 +
</html>
 +
</div>
 +
</div>
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''CDC Notes'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
CDC Occupancy: There should be a uniform decrease in intensity from the center of the detector outward. Random white cells scattered throughout occur when not enough data were collected, eg empty target runs, trigger tests or no beam. Several contiguous white, dark blue or bright yellow cells which don't match the neighboring cells are a problem. 
 +
<br />
 +
Time-to-distance: 𝛿, the change in length of the LOCA caused by the straw deformation, is
 +
plotted against the measured drift time, t drift . The color scale indicates the distance of
 +
closest approach between the track and the wire, obtained from the tracking software.
 +
The red lines are contours of the time-to-distance function for constant drift distances
 +
from 1.5 mm to 8 mm, in steps of 0.5 mm. They should lie over the top of the dark blue contour lines separating the colour blocks.
 +
For the plot of residuals vs drift time, the mean should be less than 15um and the sigma should be less than 150um.
 +
<br/>
 +
dE/dx: At 1.5GeV/c the fitted peak mean should be within 1% of 2.02 keV/cm.
 +
<br/>
 +
Efficiency: The efficiency should be 0.98 or higher at 0cm DOCA, gradually fall to 0.97 at approximately 0.5mm and then more steeply through 0.9 at approximately 0.64cm.   
 +
</html>
 +
 +
</div>
 +
</div>
 +
 +
===FCAL===
 +
* Check Occupancy - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver06/Run071724/__fcal_digOcc2D.png link] ]
 +
* Check FCAL Hits 1 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver06/Run071724/fcal_hit_energy.png link] ]
 +
* Check FCAL Hits 2 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver06/Run071724/fcal_hit_timing.png link] ]
 +
* Check FCAL Clusters 1 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver06/Run071724/fcal_cluster_space.png link] ]
 +
* Check FCAL Recon. 1 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver06/Run071724/HistMacro_FCALReconstruction_p1.png link] ]
 +
* Check FCAL Recon. 2 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver06/Run071724/HistMacro_FCALReconstruction_p2.png link] ]
 +
* Check Recon. FCAL Matching - Reference:  [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver06/Run071724/HistMacro_Matching_FCAL.png link] ]
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''FCAL Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/__fcal_digOcc2D.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/__fcal_digOcc2D.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/fcal_hit_energy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/fcal_hit_energy.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/fcal_hit_timing.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/fcal_hit_timing.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/fcal_cluster_space.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/fcal_cluster_space.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_FCALReconstruction_p1.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_FCALReconstruction_p1.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2018-08/mon_ver08/Run071724/HistMacro_FCALReconstruction_p2.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_FCALReconstruction_p2.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_Matching_FCAL.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_Matching_FCAL.png" height="200"/></a>
 +
</html>
 +
</div>
 +
</div>
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''FCAL Notes'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
Is used for neutral particle detection and pion identification.
 +
<br />
 +
</html>
 +
 +
</div>
 +
</div>
 +
 +
 +
===FDC===
 +
* Check Package 1 Occupancy - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/FDC_P1_pseudo_occupancy.png link] ]
 +
* Check Package 2 Occupancy - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/FDC_P2_pseudo_occupancy.png link] ]
 +
* Check Package 3 Occupancy - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/FDC_P3_pseudo_occupancy.png link] ]
 +
* Check Package 4 Occupancy - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/FDC_P4_pseudo_occupancy.png link] ]
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''FDC Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/FDC_P1_pseudo_occupancy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/FDC_P1_pseudo_occupancy.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/FDC_P2_pseudo_occupancy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/FDC_P2_pseudo_occupancy.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/FDC_P3_pseudo_occupancy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/FDC_P3_pseudo_occupancy.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/FDC_P4_pseudo_occupancy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/FDC_P4_pseudo_occupancy.png" height="200"/></a>
 +
</html>
 +
</div>
 +
</div>
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''FDC Notes'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
</html>
 +
 +
</div>
 +
</div>
 +
 +
 +
===PS===
 +
* Check Occupancy - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/PS_occupancy.png link] ]
 +
* Check Timing Alignment - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_PSTimingAlignment.png link] ]
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''PS Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/PS_occupancy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/PS_occupancy.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/PS_occupancy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_PSTimingAlignment.png" height="200"/></a>
 +
</html>
 +
</div>
 +
</div>
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''PS Notes'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
</html>
 +
 +
</div>
 +
</div>
 +
 +
 +
===SC===
 +
* Check Occupancy - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/ST_occupancy.png link] ]
 +
* Check Recon. SC 1 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_SCReconstruction_p1.png link] ]
 +
* Check Recon. SC 2 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_SCReconstruction_p2.png link] ]
 +
* Check Recon. SC Matching - Reference:  [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_Matching_SC.png link] ]
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''SC Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/bcal_occupancy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/ST_occupancy.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_SCReconstruction_p1.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_SCReconstruction_p1.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_SCReconstruction_p2.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_SCReconstruction_p2.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_Matching_SC.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_Matching_SC.png" height="200"/></a>
 +
</html>
 +
</div>
 +
</div>
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''SC Notes'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
</html>
 +
 +
</div>
 +
</div>
 +
 +
 +
===TAGH===
 +
* Check Tagger Occupancy - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/TAGGER_occupancy.png link] ]
 +
* Check TAGH Hits 2 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/TAGH_hit2.png link] ]
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''TAGH Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/TAGGER_occupancy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/TAGGER_occupancy.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/TAGH_hit2.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/TAGH_hit2.png" height="200"/></a>
 +
</html>
 +
</div>
 +
</div>
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''TAGH Notes'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
</html>
 +
 +
</div>
 +
</div>
 +
 +
 +
===TAGM===
 +
* Check Timing ADC-RF - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/__TAGM_TW_adc_rf_all.png link] ]
 +
* Check Timing T-ADC - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/__TAGM_TW_t_adc_all.png link] ]
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''TAGM Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/__TAGM_TW_adc_rf_all.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/__TAGM_TW_adc_rf_all.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/__TAGM_TW_t_adc_all.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/__TAGM_TW_t_adc_all.png" height="200"/></a>
 +
</html>
 +
</div>
 +
</div>
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''TAGM Notes'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
</html>
 +
 +
</div>
 +
</div>
 +
 +
 +
===TOF===
 +
* Check Occupancy - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/TOF_occupancy.png link] ]
 +
* Check TOF Matching 1 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_Matching_TOF.png link] ]
 +
* Check TOF Matching 2 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_Matching_TOF2.png link] ]
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''TOF Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/TOF_occupancy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/TOF_occupancy.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_Matching_TOF.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_Matching_TOF.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_Matching_TOF2.png ><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_Matching_TOF2.png" height="200"/></a>
 +
</html>
 +
</div>
 +
</div>
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''TOF Notes'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
</html>
 +
 +
</div>
 +
</div>
 +
 +
 +
===RF===
 +
* Check timing offsets - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver06/Run071724/HistMacro_RF_p2.png link] ]
 +
** Should be centered around zero
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''RF Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_RF_p2.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_RF_p2.png" height="200"/></a>
 +
</html>
 +
</div>
 +
</div>
 +
 +
 +
===Timing===
 +
* Check HLDT Calorimeter Timing - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_CalorimeterTiming.png link] ]
 +
* Check HLDT Drift Chamber Timing - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_TrackingTiming.png link] ]
 +
* Check HLDT PID System Timing - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_PIDSystemTiming.png link] ]
 +
* Check HLDT Tagger Timing - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_TaggerTiming.png link] ]
 +
* Check HLDT Tagger/RF Align 2 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_TaggerRFAlignment2.png link] ]
 +
* Check HLDT Tagger/SC Align - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_TaggerSCAlignment.png link] ]
 +
* Check HLDT Track-Matched Timing - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_TrackMatchedTiming.png link] ]
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''Timing Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_CalorimeterTiming.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_CalorimeterTiming.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_TrackingTiming.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_TrackingTiming.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_PIDSystemTiming.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_PIDSystemTiming.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_TaggerTiming.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_TaggerTiming.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_TaggerRFAlignment2.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_TaggerRFAlignment2.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_TaggerSCAlignment.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_TaggerSCAlignment.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_TrackMatchedTiming.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_TrackMatchedTiming.png" height="200"/></a>
 +
</html>
 +
</div>
 +
</div>
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''Timing Notes'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
* Calorimeter Timing - The right two plots aren't aligned at zero because not all corrections are currently applied.  If there is a 32 ns shift in part of this data, please note this.
 +
* Drift Chamber Timing - In each case, the main peaks should line up at zero, but often have other structures.  Ignore the first few bins of the lower left plot (they mostly say something about the noise in the detector).  There can be 32 ns shifts in the lower right plot.
 +
* PID System Timing - Nothing to note yet.
 +
* Tagger Timing - The signal to background levels of the left two plots depend on the electron beam current.
 +
* Track Matched Timing - Some overlap here with the tracking timing.  The new plots should be centered at zero.
 +
* Tagger/RF Timing - Look for the nice "picket fences" on the right two plots, and that in the bottom left plot each channel peaks at zero.
 +
* Tagger/SC Timing - Should be similar to Tagger/RF Timing but with larger resolution.
 +
 +
 +
<html>
 +
</html>
 +
 +
</div>
 +
</div>
 +
 +
===Analysis===
 +
* Tracking 1 - [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_Tracking_p1.png link] ]
 +
* Tracking 3 - [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_Tracking_p3.png link] ]
 +
* Check BCAL pi0 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/bcal_inv_mass.png link] ]
 +
* Check BCAL/FCAL pi0 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/bcal_fcal_inv_mass.png link] ]
 +
* Check p+2pi - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_p2pi.png link] ]
 +
* Check p+3pi - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_p3pi.png link] ]
 +
* Check p+pi0g - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_ppi0gamma.png link] ]
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''Analysis Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_Tracking_p1.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_Tracking_p1.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_Tracking_p3.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_Tracking_p3.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/bcal_inv_mass.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/bcal_inv_mass.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/bcal_fcal_inv_mass.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/bcal_fcal_inv_mass.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_p2pi.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_p2pi.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_p3pi.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_p3pi.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_ppi0gamma.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071724/HistMacro_ppi0gamma.png" height="200"/></a>
 +
</html>
 +
</div>
 +
</div>
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''Analysis Notes'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
Generally in these plots, there will be a difference between diamond and amorphous radiator running.  Should probably add some references for non-diamond plots.
 +
 +
* Tracking 1 - There should be some mild dependence on beam current and radiator.  Note the spikes in the upper right plot are because we have 4 hypotheses fit to a track by default.  The lower left plot does have a peak at zero.
 +
* Tracking 3 -
 +
* Check BCAL pi0 - The fitted peak should near at the correct pi0 mass of 135 MeV.
 +
* Check BCAL/FCAL pi0 - The fitted peak should be lower than the correct pi0 mass, I think because the wrong vertex is used.
 +
* Check p+2pi - The top middle plot should have a sin(2phi) shape for diamond runs.  Note that the yields in the top right plot vary from run to run on the order of 10-20%. 
 +
* Check p+3pi -Note that the yields in the top right plot vary from run to run on the order of 10-20%. 
 +
* Check p+pi0g - Note that the yields in the top right plot vary from run to run on the order of 10-20%. 
 +
** Note that these yields are sensitive to the tagger range used!  This changes for different beam current settings.
 +
 +
<html>
 +
</html>
 +
 +
</div>
 +
</div>
 +
 +
 +
== 150nA / 250 nA runs ==
 +
 +
===BCAL===
 +
* Check Occupancy - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/bcal_occupancy.png link] ]
 +
* Check Hit Efficiency - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/bcal_hist_eff.png link] ]
 +
* Check Recon. BCAL 1 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_BCALReconstruction_p1.png link] ]
 +
* Check Recon. BCAL 2 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_BCALReconstruction_p2.png link] ]
 +
* Check BCAL Matching - Reference:  [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_Matching_BCAL.png link] ]
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''BCAL Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/bcal_occupancy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/bcal_occupancy.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/bcal_hist_eff.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/bcal_hist_eff.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_BCALReconstruction_p1"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_BCALReconstruction_p1" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_BCALReconstruction_p2.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_BCALReconstruction_p2.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_Matching_BCAL.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_Matching_BCAL.png" height="200"/></a>
 +
</html>
 +
</div>
 +
</div>
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''BCAL Notes'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
The BCAL is used to measure the energy and time of showers.
 +
The energy is vital for the neutrals.  But it’s also used for charged particles to do PID.
 +
<br />
 +
BCAL Matching: These plots are for charged particles that are tracked in the drift chambers and projected to the BCAL. The z position along the BCAL can be calculated using the time difference between upstream and downstream hits and compared to the extrapolated position using the drift chambers. <br />
 +
BCAL/Track Delta z = (z determined from time of up - down hits in BCAL) - (z determined from the extrapolation of tracks in the drift chambers)
 +
projected BCAL Hit-Z = z determined by extrapolating tracks in the drift chambers to the BCAL.
 +
The match rate is the ratio of (number of hits in the BCAL that match the extrapolation of tracks in the drift chamber) / (number of tracks in the drift chamber that point at the BCAL). 
 +
</html>
 +
 +
</div>
 +
</div>
 +
 +
===CDC===
 +
* Check Occupancy - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/CDC_occupancy.png link] ]
 +
* Check Time-to-distance - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_CDCTimeToDistance.png link] ]
 +
* Check dE/dx - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/CDC_dedx.png  link] ]
 +
* Check Efficiency- Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/CDC_eff.png link] ]
 +
 +
<!--
 +
* Check CDC ROC amp - Reference: [ [https://halldweb.jlab.org/work/halld2/calibration/RunPeriod-2018-08/mon_ver08/Run071463/verify/verify_CDC_roc_amp.png link] ]
 +
* Check CDC ROC netamp - Reference: [ [https://halldweb.jlab.org/work/halld2/calibration/RunPeriod-2018-08/mon_ver08/Run071463/verify/verify_CDC_roc_netamp.png link] ]
 +
* Check CDC ROC hits - Reference: [ [https://halldweb.jlab.org/work/halld2/calibration/RunPeriod-2018-08/mon_ver08/Run071463/verify/verify_CDC_roc_hits.png link] ]
 +
* Check CDC rawtime vs strawnum. - Reference: [ [https://halldweb.jlab.org/work/halld2/calibration/RunPeriod-2018-08/mon_ver08/Run071463/verify/verify_CDC_rawtime_vs_strawnum.png    link] ]
 +
-->
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''CDC Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/CDC_occupancy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/CDC_occupancy.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_CDCTimeToDistance.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_CDCTimeToDistance.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/CDC_dedx.png""><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/CDC_dedx.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/CDC_eff.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/CDC_eff.png" height="200"/></a>
 +
 +
 +
<!--
 +
<a href="/work/halld2/calibration/RunPeriod-2018-01/ver18/Run042577/verify/verify_CDC_roc_amp.png"><img src="/work/halld2/calibration/RunPeriod-2018-01/ver18/Run042577/verify/verify_CDC_roc_amp.png" height="200"/></a>
 +
<a href="/work/halld2/calibration/RunPeriod-2018-01/ver18/Run042577/verify/verify_CDC_roc_netamp.png"><img src="/work/halld2/calibration/RunPeriod-2018-01/ver18/Run042577/verify/verify_CDC_roc_netamp.png" height="200"/></a>
 +
<a href="/work/halld2/calibration/RunPeriod-2018-01/ver18/Run042577/verify/verify_CDC_roc_hits.png"><img src="/work/halld2/calibration/RunPeriod-2018-01/ver18/Run042577/verify/verify_CDC_roc_hits.png" height="200"/></a>
 +
<a href="/work/halld2/calibration/RunPeriod-2018-01/ver18/Run042577/verify/verify_CDC_rawtime_vs_strawnum.png"><img src="/work/halld2/calibration/RunPeriod-2018-01/ver18/Run042577/verify/verify_CDC_rawtime_vs_strawnum.png" height="200"/></a>
 +
-->
 +
</html>
 +
</div>
 +
</div>
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''CDC Notes'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
CDC Occupancy: There should be a uniform decrease in intensity from the center of the detector outward. Random white cells scattered throughout occur when not enough data were collected, eg empty target runs, trigger tests or no beam. Several contiguous white, dark blue or bright yellow cells which don't match the neighboring cells are a problem. 
 +
<br />
 +
Time-to-distance: 𝛿, the change in length of the LOCA caused by the straw deformation, is
 +
plotted against the measured drift time, t drift . The color scale indicates the distance of
 +
closest approach between the track and the wire, obtained from the tracking software.
 +
The red lines are contours of the time-to-distance function for constant drift distances
 +
from 1.5 mm to 8 mm, in steps of 0.5 mm. They should lie over the top of the dark blue contour lines separating the colour blocks.
 +
For the plot of residuals vs drift time, the mean should be less than 5um and the sigma should be less than 180um.
 +
<br/>
 +
dE/dx: At 1.5GeV/c the fitted peak mean should be within 1% of 2.02 keV/cm.
 +
<br/>
 +
Efficiency: The efficiency should be 0.98 or higher at 0cm DOCA, gradually fall to 0.97 at approximately 0.5mm and then more steeply through 0.9 at approximately 0.64cm.   
 +
</html>
 +
 +
</div>
 +
</div>
 +
 +
===FCAL===
 +
* Check Occupancy - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver06/Run071724/__fcal_digOcc2D.png link] ]
 +
* Check FCAL Hits 1 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver06/Run071724/fcal_hit_energy.png link] ]
 +
* Check FCAL Hits 2 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver06/Run071724/fcal_hit_timing.png link] ]
 +
* Check FCAL Clusters 1 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver06/Run071724/fcal_cluster_space.png link] ]
 +
* Check FCAL Recon. 1 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver06/Run071724/HistMacro_FCALReconstruction_p1.png link] ]
 +
* Check FCAL Recon. 2 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver06/Run071724/HistMacro_FCALReconstruction_p2.png link] ]
 +
* Check Recon. FCAL Matching - Reference:  [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver06/Run071724/HistMacro_Matching_FCAL.png link] ]
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''FCAL Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/__fcal_digOcc2D.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/__fcal_digOcc2D.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/fcal_hit_energy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/fcal_hit_energy.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/fcal_hit_timing.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/fcal_hit_timing.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/fcal_cluster_space.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/fcal_cluster_space.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_FCALReconstruction_p1.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_FCALReconstruction_p1.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2018-08/mon_ver08/Run071463/HistMacro_FCALReconstruction_p2.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_FCALReconstruction_p2.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_Matching_FCAL.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_Matching_FCAL.png" height="200"/></a>
 +
</html>
 +
</div>
 +
</div>
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''FCAL Notes'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
Is used for neutral particle detection and pion identification.
 +
<br />
 +
</html>
 +
 +
</div>
 +
</div>
 +
 +
 +
===FDC===
 +
* Check Package 1 Occupancy - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/FDC_P1_pseudo_occupancy.png link] ]
 +
* Check Package 2 Occupancy - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/FDC_P2_pseudo_occupancy.png link] ]
 +
* Check Package 3 Occupancy - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/FDC_P3_pseudo_occupancy.png link] ]
 +
* Check Package 4 Occupancy - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/FDC_P4_pseudo_occupancy.png link] ]
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''FDC Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/FDC_P1_pseudo_occupancy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/FDC_P1_pseudo_occupancy.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/FDC_P2_pseudo_occupancy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/FDC_P2_pseudo_occupancy.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/FDC_P3_pseudo_occupancy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/FDC_P3_pseudo_occupancy.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/FDC_P4_pseudo_occupancy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/FDC_P4_pseudo_occupancy.png" height="200"/></a>
 +
</html>
 +
</div>
 +
</div>
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''FDC Notes'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
</html>
 +
 +
</div>
 +
</div>
 +
 +
 +
===PS===
 +
* Check Occupancy - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/PS_occupancy.png link] ]
 +
* Check Timing Alignment - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_PSTimingAlignment.png link] ]
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''PS Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/PS_occupancy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/PS_occupancy.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/PS_occupancy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_PSTimingAlignment.png" height="200"/></a>
 +
</html>
 +
</div>
 +
</div>
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''PS Notes'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
</html>
 +
 +
</div>
 +
</div>
 +
 +
 +
===SC===
 +
* Check Occupancy - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/ST_occupancy.png link] ]
 +
* Check Recon. SC 1 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_SCReconstruction_p1.png link] ]
 +
* Check Recon. SC 2 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_SCReconstruction_p2.png link] ]
 +
* Check Recon. SC Matching - Reference:  [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_Matching_SC.png link] ]
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''SC Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/bcal_occupancy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/ST_occupancy.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_SCReconstruction_p1.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_SCReconstruction_p1.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_SCReconstruction_p2.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_SCReconstruction_p2.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_Matching_SC.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_Matching_SC.png" height="200"/></a>
 +
</html>
 +
</div>
 +
</div>
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''SC Notes'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
</html>
 +
 +
</div>
 +
</div>
 +
 +
 +
===TAGH===
 +
* Check Tagger Occupancy - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/TAGGER_occupancy.png link] ]
 +
* Check TAGH Hits 2 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/TAGH_hit2.png link] ]
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''TAGH Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/TAGGER_occupancy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/TAGGER_occupancy.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/TAGH_hit2.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/TAGH_hit2.png" height="200"/></a>
 +
</html>
 +
</div>
 +
</div>
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''TAGH Notes'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
</html>
 +
 +
</div>
 +
</div>
 +
 +
 +
===TAGM===
 +
* Check Timing ADC-RF - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/__TAGM_TW_adc_rf_all.png link] ]
 +
* Check Timing T-ADC - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/__TAGM_TW_t_adc_all.png link] ]
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''TAGM Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/__TAGM_TW_adc_rf_all.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/__TAGM_TW_adc_rf_all.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/__TAGM_TW_t_adc_all.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/__TAGM_TW_t_adc_all.png" height="200"/></a>
 +
</html>
 +
</div>
 +
</div>
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''TAGM Notes'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
</html>
 +
 +
</div>
 +
</div>
 +
 +
 +
===TOF===
 +
* Check Occupancy - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/TOF_occupancy.png link] ]
 +
* Check TOF Matching 1 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_Matching_TOF.png link] ]
 +
* Check TOF Matching 2 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_Matching_TOF2.png link] ]
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''TOF Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/TOF_occupancy.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/TOF_occupancy.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_Matching_TOF.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_Matching_TOF.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_Matching_TOF2.png ><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_Matching_TOF2.png" height="200"/></a>
 +
</html>
 +
</div>
 +
</div>
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''TOF Notes'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
</html>
 +
 +
</div>
 +
</div>
 +
 +
 +
===RF===
 +
* Check timing offsets - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver06/Run071724/HistMacro_RF_p2.png link] ]
 +
** Should be centered around zero
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''RF Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_RF_p2.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_RF_p2.png" height="200"/></a>
 +
</html>
 +
</div>
 +
</div>
 +
 +
 +
===Timing===
 +
* Check HLDT Calorimeter Timing - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_CalorimeterTiming.png link] ]
 +
* Check HLDT Drift Chamber Timing - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_TrackingTiming.png link] ]
 +
* Check HLDT PID System Timing - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_PIDSystemTiming.png link] ]
 +
* Check HLDT Tagger Timing - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_TaggerTiming.png link] ]
 +
* Check HLDT Tagger/RF Align 2 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_TaggerRFAlignment2.png link] ]
 +
* Check HLDT Tagger/SC Align - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_TaggerSCAlignment.png link] ]
 +
* Check HLDT Track-Matched Timing - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_TrackMatchedTiming.png link] ]
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''Timing Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_CalorimeterTiming.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_CalorimeterTiming.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_TrackingTiming.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_TrackingTiming.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_PIDSystemTiming.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_PIDSystemTiming.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_TaggerTiming.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_TaggerTiming.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_TaggerRFAlignment2.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_TaggerRFAlignment2.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_TaggerSCAlignment.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_TaggerSCAlignment.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_TrackMatchedTiming.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_TrackMatchedTiming.png" height="200"/></a>
 +
</html>
 +
</div>
 +
</div>
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''Timing Notes'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
* Calorimeter Timing - The right two plots aren't aligned at zero because not all corrections are currently applied.  If there is a 32 ns shift in part of this data, please note this.
 +
* Drift Chamber Timing - In each case, the main peaks should line up at zero, but often have other structures.  Ignore the first few bins of the lower left plot (they mostly say something about the noise in the detector).  There can be 32 ns shifts in the lower right plot.
 +
* PID System Timing - Nothing to note yet.
 +
* Tagger Timing - The signal to background levels of the left two plots depend on the electron beam current.
 +
* Track Matched Timing - Some overlap here with the tracking timing.  The new plots should be centered at zero.
 +
* Tagger/RF Timing - Look for the nice "picket fences" on the right two plots, and that in the bottom left plot each channel peaks at zero.
 +
* Tagger/SC Timing - Should be similar to Tagger/RF Timing but with larger resolution.
 +
 +
 +
<html>
 +
</html>
 +
 +
</div>
 +
</div>
 +
 +
===Analysis===
 +
* Tracking 1 - [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_Tracking_p1.png link] ]
 +
* Tracking 3 - [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_Tracking_p3.png link] ]
 +
* Check BCAL pi0 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/bcal_inv_mass.png link] ]
 +
* Check BCAL/FCAL pi0 - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/bcal_fcal_inv_mass.png link] ]
 +
* Check p+2pi - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_p2pi.png link] ]
 +
* Check p+3pi - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_p3pi.png link] ]
 +
* Check p+pi0g - Reference: [ [https://halldweb.jlab.org/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_ppi0gamma.png link] ]
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''Analysis Reference Plots'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
<html>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_Tracking_p1.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_Tracking_p1.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_Tracking_p3.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_Tracking_p3.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/bcal_inv_mass.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/bcal_inv_mass.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/bcal_fcal_inv_mass.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/bcal_fcal_inv_mass.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_p2pi.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_p2pi.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_p3pi.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_p3pi.png" height="200"/></a>
 +
<a href="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_ppi0gamma.png"><img src="/work/halld2/data_monitoring/RunPeriod-2019-11/mon_ver08/Run071463/HistMacro_ppi0gamma.png" height="200"/></a>
 +
</html>
 +
</div>
 +
</div>
 +
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
 +
'''Analysis Notes'''
 +
 +
<div class="mw-collapsible-content">
 +
 +
Generally in these plots, there will be a difference between diamond and amorphous radiator running.  Should probably add some references for non-diamond plots.
 +
 +
* Tracking 1 - There should be some mild dependence on beam current and radiator.  Note the spikes in the upper right plot are because we have 4 hypotheses fit to a track by default.  The lower left plot does have a peak at zero.
 +
* Tracking 3 -
 +
* Check BCAL pi0 - The fitted peak should near at the correct pi0 mass of 135 MeV.
 +
* Check BCAL/FCAL pi0 - The fitted peak should be lower than the correct pi0 mass, I think because the wrong vertex is used.
 +
* Check p+2pi - The top middle plot should have a sin(2phi) shape for diamond runs.  Note that the yields in the top right plot vary from run to run on the order of 10-20%. 
 +
* Check p+3pi -Note that the yields in the top right plot vary from run to run on the order of 10-20%. 
 +
* Check p+pi0g - Note that the yields in the top right plot vary from run to run on the order of 10-20%. 
 +
** Note that these yields are sensitive to the tagger range used!  This changes for different beam current settings.
 +
 +
<html>
 +
</html>
 +
 +
</div>
 +
</div>

Revision as of 19:29, 28 October 2021

Run Periods


Procedure

For each production run, do the following:

  • Go to the Offline Run Browser page.
  • Follow the steps outlined in the checklist below.
  • Workers should check each plot for their assigned subsystem and leave notes in the corresponding spreadsheet if any significant deviations are seen
  • On the spreadsheet, enter "Y" in the "Overall Quality" field if all monitoring histograms are acceptable, otherwise enter "N"
  • We will iterate this procedure until the process converges

Expert Actions

  • Certify that each subsystem is okay
  • Set run status in RCDB based on monitoring results
    • (script provided)

Run Statuses

  • -1 - unchecked
  • 0 - rejected (not physics-quality)
  • 1 - approved
  • 2 - approved long/"mode 8" data
  • 3 - calibration / systematic studies


Checklist

Example Monitoring Spreadsheet

Reference run for 2017-01: 30780

Reference run for 2018-01: 40933/4

Reference run for 2018-08: 51388

Reference run for 2019-11: 71463 (150 nA), 71469 (250 nA), 71724 (350 nA) [for now!]

General Notes

350 nA runs

BCAL

  • Check Occupancy - Reference: [ link ]
  • Check Hit Efficiency - Reference: [ link ]
  • Check Recon. BCAL 1 - Reference: [ link ]
  • Check Recon. BCAL 2 - Reference: [ link ]
  • Check BCAL Matching - Reference: [ link ]

BCAL Reference Plots

BCAL Notes

The BCAL is used to measure the energy and time of showers. The energy is vital for the neutrals. But it’s also used for charged particles to do PID.
BCAL Matching: These plots are for charged particles that are tracked in the drift chambers and projected to the BCAL. The z position along the BCAL can be calculated using the time difference between upstream and downstream hits and compared to the extrapolated position using the drift chambers.
BCAL/Track Delta z = (z determined from time of up - down hits in BCAL) - (z determined from the extrapolation of tracks in the drift chambers) projected BCAL Hit-Z = z determined by extrapolating tracks in the drift chambers to the BCAL. The match rate is the ratio of (number of hits in the BCAL that match the extrapolation of tracks in the drift chamber) / (number of tracks in the drift chamber that point at the BCAL).

CDC

  • Check Occupancy - Reference: [ link ]
  • Check Time-to-distance - Reference: [ link ]
  • Check dE/dx - Reference: [ link ]
  • Check Efficiency- Reference: [ link ]

CDC Reference Plots

CDC Notes

CDC Occupancy: There should be a uniform decrease in intensity from the center of the detector outward. Random white cells scattered throughout occur when not enough data were collected, eg empty target runs, trigger tests or no beam. Several contiguous white, dark blue or bright yellow cells which don't match the neighboring cells are a problem.
Time-to-distance: 𝛿, the change in length of the LOCA caused by the straw deformation, is plotted against the measured drift time, t drift . The color scale indicates the distance of closest approach between the track and the wire, obtained from the tracking software. The red lines are contours of the time-to-distance function for constant drift distances from 1.5 mm to 8 mm, in steps of 0.5 mm. They should lie over the top of the dark blue contour lines separating the colour blocks. For the plot of residuals vs drift time, the mean should be less than 15um and the sigma should be less than 150um.
dE/dx: At 1.5GeV/c the fitted peak mean should be within 1% of 2.02 keV/cm.
Efficiency: The efficiency should be 0.98 or higher at 0cm DOCA, gradually fall to 0.97 at approximately 0.5mm and then more steeply through 0.9 at approximately 0.64cm.

FCAL

  • Check Occupancy - Reference: [ link ]
  • Check FCAL Hits 1 - Reference: [ link ]
  • Check FCAL Hits 2 - Reference: [ link ]
  • Check FCAL Clusters 1 - Reference: [ link ]
  • Check FCAL Recon. 1 - Reference: [ link ]
  • Check FCAL Recon. 2 - Reference: [ link ]
  • Check Recon. FCAL Matching - Reference: [ link ]

FCAL Reference Plots

FCAL Notes

Is used for neutral particle detection and pion identification.


FDC

  • Check Package 1 Occupancy - Reference: [ link ]
  • Check Package 2 Occupancy - Reference: [ link ]
  • Check Package 3 Occupancy - Reference: [ link ]
  • Check Package 4 Occupancy - Reference: [ link ]

FDC Reference Plots

FDC Notes


PS

  • Check Occupancy - Reference: [ link ]
  • Check Timing Alignment - Reference: [ link ]

PS Reference Plots

PS Notes


SC

  • Check Occupancy - Reference: [ link ]
  • Check Recon. SC 1 - Reference: [ link ]
  • Check Recon. SC 2 - Reference: [ link ]
  • Check Recon. SC Matching - Reference: [ link ]

SC Reference Plots

SC Notes


TAGH

  • Check Tagger Occupancy - Reference: [ link ]
  • Check TAGH Hits 2 - Reference: [ link ]

TAGH Reference Plots

TAGH Notes


TAGM

  • Check Timing ADC-RF - Reference: [ link ]
  • Check Timing T-ADC - Reference: [ link ]

TAGM Reference Plots

TAGM Notes


TOF

  • Check Occupancy - Reference: [ link ]
  • Check TOF Matching 1 - Reference: [ link ]
  • Check TOF Matching 2 - Reference: [ link ]

TOF Reference Plots

TOF Notes


RF

  • Check timing offsets - Reference: [ link ]
    • Should be centered around zero

RF Reference Plots


Timing

  • Check HLDT Calorimeter Timing - Reference: [ link ]
  • Check HLDT Drift Chamber Timing - Reference: [ link ]
  • Check HLDT PID System Timing - Reference: [ link ]
  • Check HLDT Tagger Timing - Reference: [ link ]
  • Check HLDT Tagger/RF Align 2 - Reference: [ link ]
  • Check HLDT Tagger/SC Align - Reference: [ link ]
  • Check HLDT Track-Matched Timing - Reference: [ link ]

Timing Reference Plots

Timing Notes

  • Calorimeter Timing - The right two plots aren't aligned at zero because not all corrections are currently applied. If there is a 32 ns shift in part of this data, please note this.
  • Drift Chamber Timing - In each case, the main peaks should line up at zero, but often have other structures. Ignore the first few bins of the lower left plot (they mostly say something about the noise in the detector). There can be 32 ns shifts in the lower right plot.
  • PID System Timing - Nothing to note yet.
  • Tagger Timing - The signal to background levels of the left two plots depend on the electron beam current.
  • Track Matched Timing - Some overlap here with the tracking timing. The new plots should be centered at zero.
  • Tagger/RF Timing - Look for the nice "picket fences" on the right two plots, and that in the bottom left plot each channel peaks at zero.
  • Tagger/SC Timing - Should be similar to Tagger/RF Timing but with larger resolution.


Analysis

  • Tracking 1 - [ link ]
  • Tracking 3 - [ link ]
  • Check BCAL pi0 - Reference: [ link ]
  • Check BCAL/FCAL pi0 - Reference: [ link ]
  • Check p+2pi - Reference: [ link ]
  • Check p+3pi - Reference: [ link ]
  • Check p+pi0g - Reference: [ link ]

Analysis Reference Plots

Analysis Notes

Generally in these plots, there will be a difference between diamond and amorphous radiator running. Should probably add some references for non-diamond plots.

  • Tracking 1 - There should be some mild dependence on beam current and radiator. Note the spikes in the upper right plot are because we have 4 hypotheses fit to a track by default. The lower left plot does have a peak at zero.
  • Tracking 3 -
  • Check BCAL pi0 - The fitted peak should near at the correct pi0 mass of 135 MeV.
  • Check BCAL/FCAL pi0 - The fitted peak should be lower than the correct pi0 mass, I think because the wrong vertex is used.
  • Check p+2pi - The top middle plot should have a sin(2phi) shape for diamond runs. Note that the yields in the top right plot vary from run to run on the order of 10-20%.
  • Check p+3pi -Note that the yields in the top right plot vary from run to run on the order of 10-20%.
  • Check p+pi0g - Note that the yields in the top right plot vary from run to run on the order of 10-20%.
    • Note that these yields are sensitive to the tagger range used! This changes for different beam current settings.


150nA / 250 nA runs

BCAL

  • Check Occupancy - Reference: [ link ]
  • Check Hit Efficiency - Reference: [ link ]
  • Check Recon. BCAL 1 - Reference: [ link ]
  • Check Recon. BCAL 2 - Reference: [ link ]
  • Check BCAL Matching - Reference: [ link ]

BCAL Reference Plots

BCAL Notes

The BCAL is used to measure the energy and time of showers. The energy is vital for the neutrals. But it’s also used for charged particles to do PID.
BCAL Matching: These plots are for charged particles that are tracked in the drift chambers and projected to the BCAL. The z position along the BCAL can be calculated using the time difference between upstream and downstream hits and compared to the extrapolated position using the drift chambers.
BCAL/Track Delta z = (z determined from time of up - down hits in BCAL) - (z determined from the extrapolation of tracks in the drift chambers) projected BCAL Hit-Z = z determined by extrapolating tracks in the drift chambers to the BCAL. The match rate is the ratio of (number of hits in the BCAL that match the extrapolation of tracks in the drift chamber) / (number of tracks in the drift chamber that point at the BCAL).

CDC

  • Check Occupancy - Reference: [ link ]
  • Check Time-to-distance - Reference: [ link ]
  • Check dE/dx - Reference: [ link ]
  • Check Efficiency- Reference: [ link ]

CDC Reference Plots

CDC Notes

CDC Occupancy: There should be a uniform decrease in intensity from the center of the detector outward. Random white cells scattered throughout occur when not enough data were collected, eg empty target runs, trigger tests or no beam. Several contiguous white, dark blue or bright yellow cells which don't match the neighboring cells are a problem.
Time-to-distance: 𝛿, the change in length of the LOCA caused by the straw deformation, is plotted against the measured drift time, t drift . The color scale indicates the distance of closest approach between the track and the wire, obtained from the tracking software. The red lines are contours of the time-to-distance function for constant drift distances from 1.5 mm to 8 mm, in steps of 0.5 mm. They should lie over the top of the dark blue contour lines separating the colour blocks. For the plot of residuals vs drift time, the mean should be less than 5um and the sigma should be less than 180um.
dE/dx: At 1.5GeV/c the fitted peak mean should be within 1% of 2.02 keV/cm.
Efficiency: The efficiency should be 0.98 or higher at 0cm DOCA, gradually fall to 0.97 at approximately 0.5mm and then more steeply through 0.9 at approximately 0.64cm.

FCAL

  • Check Occupancy - Reference: [ link ]
  • Check FCAL Hits 1 - Reference: [ link ]
  • Check FCAL Hits 2 - Reference: [ link ]
  • Check FCAL Clusters 1 - Reference: [ link ]
  • Check FCAL Recon. 1 - Reference: [ link ]
  • Check FCAL Recon. 2 - Reference: [ link ]
  • Check Recon. FCAL Matching - Reference: [ link ]

FCAL Reference Plots

FCAL Notes

Is used for neutral particle detection and pion identification.


FDC

  • Check Package 1 Occupancy - Reference: [ link ]
  • Check Package 2 Occupancy - Reference: [ link ]
  • Check Package 3 Occupancy - Reference: [ link ]
  • Check Package 4 Occupancy - Reference: [ link ]

FDC Reference Plots

FDC Notes


PS

  • Check Occupancy - Reference: [ link ]
  • Check Timing Alignment - Reference: [ link ]

PS Reference Plots

PS Notes


SC

  • Check Occupancy - Reference: [ link ]
  • Check Recon. SC 1 - Reference: [ link ]
  • Check Recon. SC 2 - Reference: [ link ]
  • Check Recon. SC Matching - Reference: [ link ]

SC Reference Plots

SC Notes


TAGH

  • Check Tagger Occupancy - Reference: [ link ]
  • Check TAGH Hits 2 - Reference: [ link ]

TAGH Reference Plots

TAGH Notes


TAGM

  • Check Timing ADC-RF - Reference: [ link ]
  • Check Timing T-ADC - Reference: [ link ]

TAGM Reference Plots

TAGM Notes


TOF

  • Check Occupancy - Reference: [ link ]
  • Check TOF Matching 1 - Reference: [ link ]
  • Check TOF Matching 2 - Reference: [ link ]

TOF Reference Plots

TOF Notes


RF

  • Check timing offsets - Reference: [ link ]
    • Should be centered around zero

RF Reference Plots


Timing

  • Check HLDT Calorimeter Timing - Reference: [ link ]
  • Check HLDT Drift Chamber Timing - Reference: [ link ]
  • Check HLDT PID System Timing - Reference: [ link ]
  • Check HLDT Tagger Timing - Reference: [ link ]
  • Check HLDT Tagger/RF Align 2 - Reference: [ link ]
  • Check HLDT Tagger/SC Align - Reference: [ link ]
  • Check HLDT Track-Matched Timing - Reference: [ link ]

Timing Reference Plots

Timing Notes

  • Calorimeter Timing - The right two plots aren't aligned at zero because not all corrections are currently applied. If there is a 32 ns shift in part of this data, please note this.
  • Drift Chamber Timing - In each case, the main peaks should line up at zero, but often have other structures. Ignore the first few bins of the lower left plot (they mostly say something about the noise in the detector). There can be 32 ns shifts in the lower right plot.
  • PID System Timing - Nothing to note yet.
  • Tagger Timing - The signal to background levels of the left two plots depend on the electron beam current.
  • Track Matched Timing - Some overlap here with the tracking timing. The new plots should be centered at zero.
  • Tagger/RF Timing - Look for the nice "picket fences" on the right two plots, and that in the bottom left plot each channel peaks at zero.
  • Tagger/SC Timing - Should be similar to Tagger/RF Timing but with larger resolution.


Analysis

  • Tracking 1 - [ link ]
  • Tracking 3 - [ link ]
  • Check BCAL pi0 - Reference: [ link ]
  • Check BCAL/FCAL pi0 - Reference: [ link ]
  • Check p+2pi - Reference: [ link ]
  • Check p+3pi - Reference: [ link ]
  • Check p+pi0g - Reference: [ link ]

Analysis Reference Plots

Analysis Notes

Generally in these plots, there will be a difference between diamond and amorphous radiator running. Should probably add some references for non-diamond plots.

  • Tracking 1 - There should be some mild dependence on beam current and radiator. Note the spikes in the upper right plot are because we have 4 hypotheses fit to a track by default. The lower left plot does have a peak at zero.
  • Tracking 3 -
  • Check BCAL pi0 - The fitted peak should near at the correct pi0 mass of 135 MeV.
  • Check BCAL/FCAL pi0 - The fitted peak should be lower than the correct pi0 mass, I think because the wrong vertex is used.
  • Check p+2pi - The top middle plot should have a sin(2phi) shape for diamond runs. Note that the yields in the top right plot vary from run to run on the order of 10-20%.
  • Check p+3pi -Note that the yields in the top right plot vary from run to run on the order of 10-20%.
  • Check p+pi0g - Note that the yields in the top right plot vary from run to run on the order of 10-20%.
    • Note that these yields are sensitive to the tagger range used! This changes for different beam current settings.