Revision as of 19:28, 28 October 2021

Run Periods

For each production run, do the following:

Go to the Offline Run Browser page.
Follow the steps outlined in the checklist below.
Workers should check each plot for their assigned subsystem and leave notes in the corresponding spreadsheet if any significant deviations are seen
On the spreadsheet, enter "Y" in the "Overall Quality" field if all monitoring histograms are acceptable, otherwise enter "N"
We will iterate this procedure until the process converges

@@ Line 1: / Line 1: @@
+= Run Periods =
+* [[RunPeriod-2016-02 Validation]]
+* [[RunPeriod-2016-10 Validation]]
+* [[RunPeriod-2017-01 Validation]]
+* [[RunPeriod-2018-01 Validation]]
+* [[RunPeriod-2018-08 Validation]]
+* [[RunPeriod-2019-01 Validation]]
+* [[RunPeriod-2019-11 Validation]]
+* [[RunPeriod-2021-09 Validation]]
+= Procedure =
+For each production run, do the following:
+* Go to the [https://halldweb.jlab.org/data_monitoring/Plot_Browser.html Offline Run Browser] page.
+* Follow the steps outlined in the checklist below.
+* Workers should check each plot for their assigned subsystem and leave notes in the corresponding spreadsheet if any significant deviations are seen
+* On the spreadsheet, enter "Y" in the "Overall Quality" field if all monitoring histograms are acceptable, otherwise enter "N"
+* We will iterate this procedure until the process converges
+=== Expert Actions ===
+* Certify that each subsystem is okay
+* Set run status in RCDB based on monitoring results
+** (script provided)
+=== Run Statuses ===
+* -1 - unchecked
+*  0 - rejected  (not physics-quality)
+*  1 - approved
+*  2 - approved long/"mode 8" data
+*  3 - calibration / systematic studies