GlueX Start Counter Meeting, March 19, 2015

From GlueXWiki
Revision as of 13:40, 20 March 2015 by Marki (Talk | contribs) (Slides)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

GlueX Start Counter Meeting
Thursday, March 19, 2015
11:00 am EDT
CEBAF Center F326/327

Agenda

  1. Announcements
  2. Review minutes from the March 5 meeting
  3. Detector Status
    1. Hot scaler channels
    2. Scaler thresholds
  4. Calibration
  5. DAQ Tasks for Spring 2015 Commissioning Run
  6. Action Item Review

Communication

BlueJeans

Slides

Talks can be deposited in the directory /group/halld/www/halldweb/html/talks/2015 on the JLab CUE. This directory is accessible from the web at https://halldweb.jlab.org/talks/2015/ .

Minutes

  • FIU: Werner Boeglin
  • JLab: Mark Ito (chair), Eric Pooser, Beni Zihlmann

Detector Status

Eric gave the report.

  • There are three channels with higher than normal rates in the discriminator-based scalers (no beam). The standard rate is about 10 Hz, these are going at 500 Hz.
  • Eric is working on an automated program to do discriminator threshold curves. this may troubleshoot the previous item. He wants to implement a similar program that used the FADC-based scalers.

Calibration

  • Eric has done a lot of work calibrating time-walk for the start counter. He will give a presentation and next week's Calibration Meeting.
  • Eric plans to start work implementing propagation delay corrections based on the measurements made on the bench at FIU. At present Simon has implemented a simple velocity based correction in the code.

Online Monitoring Histograms

There are several improvements to the online monitoring histograms that Eric has planned. He will turn to this after the propagation delay constant work.