Difference between revisions of "February 17, 2022 KLONG Phase II Design Meeting"

From GlueXWiki
Jump to: navigation, search
(Minutes)
(Action Items)
Line 40: Line 40:
  
 
== Action Items ==
 
== Action Items ==
* Talk to Chris Keith about new cryo target - Tim
+
* Keith to continue getting more geometry info on MRI for the model
 
* Layout geometry based on today's discussion
 
* Layout geometry based on today's discussion
 
* Set up future meetings
 
* Set up future meetings

Revision as of 11:02, 18 February 2022

Meeting Time and Place

Thursday February 17, 2022, 1pm

Zoom https://jlab-org.zoomgov.com/j/1611857466?pwd=VEZndTZzdDdNOUdJU3NxblRLcVoxdz09&from=addon

  • Invited - Hovanes Egiyan, Stephanie Worthington, Keith Harding, Igor Strakovsky, Tim Whitlatch, Vitaly Baturin,

Mikhail Bashkanov, Anthony Palazzo, Eugene Chudakov, Mark Stevens

Agenda

Phase II is the section downstream of the collimator cave shield wall through the liquid target

Requirements and things to finalize

Minutes

  • Briefly discussed minutes from January meeting
  • Vitaly asked about beam pipe inside PS magnet - will be 6.35 cm OD x 6.03cm ID 316 stainless steel
  • Discussion about magnet effects of beam tube - 3166 SS has a permeability of around 1.2 so should have no significant forces.
  • Need to look at magnetic affects of adjacent PS magnet
  • We will be using the same target cart as the existing Gluex hydrogen target
  • Flux monitor detectors are just upstream and downstream of MRI
  • Keith showed best guess at MRI dimensions
    • Center of MRI is 15cm above beamline. Beamline is 30 cm above lower edge of MRI bore.
    • Platform rated for over 7 tonnes
    • Keith found additional documentation on field map and power/cooling requirements
  • Vitaly has FLUKA working with magnetic fields and will look at CPS copper energy absorption
  • Tim still needs to run heat numbers from Vitaly for the berylium and tungsten to verify cooling system

Action Items

  • Keith to continue getting more geometry info on MRI for the model
  • Layout geometry based on today's discussion
  • Set up future meetings