Electronics

From GlueXWiki
Revision as of 09:39, 10 April 2008 by Barbosa (Talk | contribs) (Meetings)

Jump to: navigation, search

Scope of Electronics Effort

The Electronics Working Group (EWG) is responsible for all the electronics instrumentation in Hall D at Jefferson Lab. The EWG tasks are to:

1. Design, procure and commission all the electronics instrumentation by working in close collaboration with all the detector and support groups and the GlueX collaboration members towards the successful construction and operation of Hall D.

2. Support the R&D efforts for all the detector subsystems.

3. Disseminate information by providing documentation necessary for the successful integration of the detector, instrumentation and readout electronics.

4. Provide for a safe work environment by effectively communicating and implementing all the safety standards and requirements at Jefferson Lab.

  • Site maintained by F.J. Barbosa. For additional information, barbosa@jlab.org or (757) 269-7433

Meetings

Electronics Tasks


Infrastructure Links

  • Summary of Hall D Detector Systems - Electronics channel counts, etc. maintained by Fernando, GlueX-doc-747
  • Hall D Complex Final Drawings (25 Feb 2008) - From landscaping to electrical details Hall D Complex
  • Hall D Space Program Design Criteria (July 2007) - Additional construction details Hall D Complex II

Electronics Subsystems

  • System Diagrams
  • Detector Electronics
 > ASIC - GAS-1 Description, Tests, Status & Plans GlueX-doc-1005
 > Preamp Card - GPC-01 Pinout GlueX-doc-826, Tests GlueX-doc-871, GlueX-doc-931,
                 User's Manual GlueX-doc-923
 > SiPM
 > PMTs
 > STBs, HVTBs, HVBs
  • Signal Integrity
 > Signal Cables - Measurements GlueX-doc-660, Specs GlueX-doc-995
 > Connectors
 > Splitters
  • Modular Electronics
 > Discriminators (LE, CFD) LE V895, CFD V812
 > Scalers Struck SIS3800s
  • Readout Electronics
 > F1TDC F1TDC User's Manual, IEEE NSS 2002 Poster
 > fADC125 Short Spec Sheet, Module Specifications
 > fADC250 Short Spec Sheet, IEEE NSS Paper, IEEE NSS Poster
  • L1 Trigger Electronics
 > Trigger Overview L1 Trigger Overview
 > Trigger System Diagrams Diagrams
 > SD - Signal Distribution
 > CTP - Crate Trigger Processor CTP Module
 > TI - Trigger Interface
 > SSP - Sub-System Processor
 > GTP - Global Trigger Processor
 > TD - Trigger Distribution TD Module
 > TS - Trigger Supervisor TS Module
  • Environmental Monitoring
 > Temperature
 > Humidity
 > Cooling Systems
  • Power Systems & Controls
 > AC
 > HV Modules CAEN A1932A 48Ch 3KV Module
 > LV Modules Wiener MPOD LV Modules, CAEN LV Module
 > High Voltage Distribution GlueX-doc-967
 > Low Voltage Distribution  GlueX-doc-966
  • Crates & Racks
 > High Voltage Chassis CAEN SY1527
 > Low Voltage Chassis Wiener MPOD, CAEN SY1527
 > VME Chassis CAEN VME64x, Wiener VME64x, Wiener 20-slot VXS
 > Racks Typical 19" Rack 77"x23"x36" (303x91x142 mm)
 > VME64x & VXS Backplane VME Pin Allocation
  • Cable Systems
 > HV
 > LV
 > Controls
 > Interfaces
  • Grounding
 > Safety
 > Reference
 > Hall
  • Safety
 > Standards & Guidelines
   6200-JLab Electrical Safety Program,
   6210-General Electrical Safety,
        Appendix 6210-T1,
        Appendix 6210-T2,
        Appendix 6210-T4,
   6220-AC Electrical Distribution,
        Appendix 6220-T1,
   6230-Electronic Equipment Safety,
   6240-Electrical Equipment Construction
 > Monitoring
 > Interlocks