Difference between revisions of "CPP FCAL time/energy calibrations"

From GlueXWiki
Jump to: navigation, search
(What is currently in the default variation)
(What is currently in the default variation)
Line 7: Line 7:
 
== What is currently in the default variation ==
 
== What is currently in the default variation ==
  
* For the energy calibration
+
* For the energy calibration (empty target periods used period 1 table)
 
+
** period 0: 100408-100845
The empty target periods used all the period 1 tables.
+
** period 1: 100961-101010
 
+
** period 2: 101011-101044
* period 0: 100408-100845
+
** period 4: 101076-101154
* period 1: 100961-101010
+
** period 8: 101255-101336
* period 2: 101011-101044
+
** period 11: 101439-101587
* period 4: 101076-101154
+
NB: the period in this section does not match the period in section "Period" but matches the period in section "Gain matching calibration plots"
* period 8: 101255-101336
+
* For the time calibration
* period 11: 101439-101587
+
 
+
NB: the period is this section does not match the period in section "Period" but match the period in section "Gain matching calibration plots"
+
  
 
== Periods ==
 
== Periods ==

Revision as of 17:49, 23 August 2022

List of changes

These lists are giving the run ranges where the FCAL hardware was not changed.

Monitoring results

What is currently in the default variation

  • For the energy calibration (empty target periods used period 1 table)
    • period 0: 100408-100845
    • period 1: 100961-101010
    • period 2: 101011-101044
    • period 4: 101076-101154
    • period 8: 101255-101336
    • period 11: 101439-101587

NB: the period in this section does not match the period in section "Period" but matches the period in section "Gain matching calibration plots"

  • For the time calibration

Periods

The periods in BOLD are calibrated i.e. have a pedestal and gain tables. Each period corresponds to constant FCAL and/or experimental conditions.

  • period 1: 100408-100960
  • period 2: 100961-101010
  • period 3: 101011-101044
  • period 4: 101045-101074 (empty target)
  • period 5: 101076-101154 (some blocks set to 1 in block_quality)
  • period 6: 101164-101166
  • period 7: 101167-101254 (empty target)
  • period 8: 101255-101336
  • period 9: 101337-101392 (Hall B half-wave plate in)
  • period 10: 101393-101402 (Hall B half-wave plate in & empty target)
  • period 11: 101403-101438 (empty target)
  • period 12: 101439-101529
  • period 13: 101530-101535 (Hall B half-wave plate in)
  • period 14: 101536-101587
  • period 15: 101597-101609 (empty target)

Gain matching calibration plots

Checking the FCAL gains

Energy dependence correction monitoring plots

Timing calibration

  • period 1: 100408-100960
  • period 2: 100961-

Bad block map

This map is done for each run number by combining the info collected by analysing the LED and pi0 skims.