Pseudo-terminal will not be allocated because stdin is not a terminal. removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/b1pi_cron_one.sh’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/b1pi_cron.sh’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/b1_pi.input’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/b1pi_message.sh’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/b1pi_test.sh’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/hddm_counter.pl’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/index.html’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/my_b1pi_test.sh’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/README’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/anal1.C’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/b1_pi.C’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/b1pi_gen.C’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/b1pi_gen.h’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/b1_pi.h’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/b1pi_rec.C’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/b1pi_rec.h’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/fit_voigt.C’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/makeallplots.C’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/mass_X.C’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/mk_pics.C’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/momentum.C’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/StandardLabels.C’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/theta.C’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/update_db.py’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/b1_pi.ascii’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/b1_pi.hddm’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/control.in’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/hdgeant.hddm’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/geant.hbook’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/hdgeant.rz’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/smear.root’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/hdgeant_smeared.hddm’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366/hd_root.root’ removed directory: ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366’ mkdir: created directory ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/11366’ info: number of threads not defined, using default value 1 info: vertex parameters not defined, using default values 0 0 50 80 NEVENTS = 10000 VERTEX = 0 0 50 80 NTHREADS = 1 B1PI_TEST_DIR = /group/halld/Software/scripts/b1pi_test RUN = 11366 Copying script files and macros ... ‘/group/halld/Software/scripts/b1pi_test/b1pi_cron_one.sh’ -> ‘./b1pi_cron_one.sh’ ‘/group/halld/Software/scripts/b1pi_test/b1pi_cron.sh’ -> ‘./b1pi_cron.sh’ ‘/group/halld/Software/scripts/b1pi_test/b1_pi.input’ -> ‘./b1_pi.input’ ‘/group/halld/Software/scripts/b1pi_test/b1pi_message.sh’ -> ‘./b1pi_message.sh’ ‘/group/halld/Software/scripts/b1pi_test/b1pi_test.sh’ -> ‘./b1pi_test.sh’ ‘/group/halld/Software/scripts/b1pi_test/hddm_counter.pl’ -> ‘./hddm_counter.pl’ ‘/group/halld/Software/scripts/b1pi_test/index.html’ -> ‘./index.html’ cp: omitting directory ‘/group/halld/Software/scripts/b1pi_test/macros’ ‘/group/halld/Software/scripts/b1pi_test/my_b1pi_test.sh’ -> ‘./my_b1pi_test.sh’ ‘/group/halld/Software/scripts/b1pi_test/README’ -> ‘./README’ ‘/group/halld/Software/scripts/b1pi_test/macros/anal1.C’ -> ‘./anal1.C’ ‘/group/halld/Software/scripts/b1pi_test/macros/b1_pi.C’ -> ‘./b1_pi.C’ ‘/group/halld/Software/scripts/b1pi_test/macros/b1pi_gen.C’ -> ‘./b1pi_gen.C’ ‘/group/halld/Software/scripts/b1pi_test/macros/b1pi_gen.h’ -> ‘./b1pi_gen.h’ ‘/group/halld/Software/scripts/b1pi_test/macros/b1_pi.h’ -> ‘./b1_pi.h’ ‘/group/halld/Software/scripts/b1pi_test/macros/b1pi_rec.C’ -> ‘./b1pi_rec.C’ ‘/group/halld/Software/scripts/b1pi_test/macros/b1pi_rec.h’ -> ‘./b1pi_rec.h’ ‘/group/halld/Software/scripts/b1pi_test/macros/fit_voigt.C’ -> ‘./fit_voigt.C’ ‘/group/halld/Software/scripts/b1pi_test/macros/makeallplots.C’ -> ‘./makeallplots.C’ ‘/group/halld/Software/scripts/b1pi_test/macros/mass_X.C’ -> ‘./mass_X.C’ ‘/group/halld/Software/scripts/b1pi_test/macros/mk_pics.C’ -> ‘./mk_pics.C’ ‘/group/halld/Software/scripts/b1pi_test/macros/momentum.C’ -> ‘./momentum.C’ ‘/group/halld/Software/scripts/b1pi_test/macros/StandardLabels.C’ -> ‘./StandardLabels.C’ ‘/group/halld/Software/scripts/b1pi_test/macros/theta.C’ -> ‘./theta.C’ ‘/group/halld/Software/scripts/b1pi_test/macros/update_db.py’ -> ‘./update_db.py’ Running genr8 ... Using runNo: 11366 Maximum number of events: 10000 Opening file b1_pi.ascii for output. Reading: beamp.x beamp.y beamp.z beamMass Found: 0.000000 0.000000 9.000000 0.000000 Reading: targetp.x targetp.y targetp.z targetMass Found: 0.000000 0.000000 0.000000 0.938000 Reading: t-channelSlope Found: 5.000000 Reading: number of particles need to describe the decay Found: 12 Reading: part# chld1# chld2# prnt# Id nchld mass width chrg flag Found: 0 -1 -1 -1 14 0 0.938000 0.000000 1 11 Found: 1 2 3 -1 0 2 2.000000 0.100000 1 0 Found: 2 4 5 1 0 2 1.235000 0.142000 1 0 Found: 3 4 5 1 9 0 0.140000 0.000000 -1 11 Found: 4 6 7 2 0 2 0.783000 0.009000 0 0 Found: 5 6 7 2 8 0 0.140000 0.000000 1 11 Found: 6 8 9 4 0 2 0.776000 0.150000 0 0 Found: 7 10 11 4 7 2 0.135000 0.000000 0 0 Found: 8 10 11 6 8 0 0.140000 0.000000 1 11 Found: 9 10 11 6 9 0 0.140000 0.000000 -1 11 Found: 10 10 11 7 1 0 0.000000 0.000000 0 11 Found: 11 10 11 7 1 0 0.000000 0.000000 0 11 Found EOI---- Input File appears Fine. Calculating Lorentz Factor: 9000 Calculating Lorentz Factor: 8000 Calculating Lorentz Factor: 7000 Calculating Lorentz Factor: 6000 Calculating Lorentz Factor: 5000 Calculating Lorentz Factor: 4000 Calculating Lorentz Factor: 3000 Calculating Lorentz Factor: 2000 Calculating Lorentz Factor: 1000 Calculating Lorentz Factor: 100 Calculating Lorentz Factor: 90 Calculating Lorentz Factor: 80 Calculating Lorentz Factor: 70 Calculating Lorentz Factor: 60 Calculating Lorentz Factor: 50 Calculating Lorentz Factor: 40 Calculating Lorentz Factor: 30 Calculating Lorentz Factor: 20 Calculating Lorentz Factor: 10 Calculating Lorentz Factor: 0 Events generated: 100 Events accepted: 43 Events generated: 200 Events accepted: 84 Events generated: 300 Events accepted: 124 Events generated: 400 Events accepted: 166 Events generated: 500 Events accepted: 213 Events generated: 600 Events accepted: 246 Events generated: 700 Events accepted: 301 Events generated: 800 Events accepted: 351 Events generated: 900 Events accepted: 400 Events generated: 1000 Events accepted: 445 Events generated: 10000 Events accepted: 4622 Events generated: 20000 Events accepted: 9248 Max Lorentz Factor:0.001295 Events generated:21565 Events accepted:10000 Setting random number seed to: 1578009818 Converting generated events to HDDM ... Wrote event 1000 Wrote event 2000 Wrote event 3000 Wrote event 4000 Wrote event 5000 Wrote event 6000 Wrote event 7000 Wrote event 8000 Wrote event 9000 Wrote event 10000 Wrote 10000 events to b1_pi.hddm Creating control.in file ... Running hdgeant ... MZSTOR. ZEBRA table base TAB(0) in /MZCC/ at adr 19813839 12E55CF HEX MZSTOR. Initialize Store 0 in /GCBANK/ with Store/Table at absolute adrs 14251589 19813839 HEX D97645 12E55CF HEX FFAB1E9A 0 relative adrs -5562726 0 with 1 Str. in 2 Links in 5300 Low words in 4999970 words. This store has a fence of 16 words. MZLOGL. Set Log Level 0 for store 0 MZSTOR. Initialize Store 1 in /PAWC/ with Store/Table at absolute adrs 9251577 14251168 HEX 8D2AF9 D974A0 HEX FF5ED34E FFAB1ED1 relative adrs -10562738 -5562671 with 1 Str. in 1 Links in 5001 Low words in 4999990 words. This store has a fence of 5 words. MZLINK. Initialize Link Area /HCBOOK/ for Store 1 NL/NS= 49 4 MZDIV. Initialize Division HIGZ in Store 1 NW/NWMAX= 10005000000, MODE/KIND= 0 3 Division 20 initialized. MZLINK. Initialize Link Area /HILINK/ for Store 1 NL/NS= 42 2 Version 1.29/04 of HIGZ started 1***** GEANT Version 3.21/14 Released on 19032002 0***** Correction Cradle Version 0.1400 MODE VERSION 1.00 : MZDIV. Initialize Division Constant in Store 0 NW/NWMAX= 20004000000, MODE/KIND= 1 2 Division 20 initialized. MZLINK. Initialize Link Area /GCLINK/ for Store 0 NL/NS= 20 20 MZLINK. Initialize Link Area /GCSLNK/ for Store 0 NL/NS= 100 100 JANA >>Created JCalibration object of type: JCalibrationCCDB JANA >>Generated via: JCalibration using CCDB for MySQL and SQLite databases JANA >>Run:11366 JANA >>URL: mysql://ccdb_user@hallddb.jlab.org/ccdb JANA >>context: variation=mc JANA >>comment: Variation for simulations with data conditions JANA >>Reading Magnetic field map from Magnets/Solenoid/solenoid_1200A_poisson_20160222 ... Nx=221 Ny=1 Nz=701 ) at 0x7409f20 Reading fine-mesh B-field data from /group/halld/www/halldweb/html/resources/Magnets/Solenoid/finemeshes/solenoid_1200A_poisson_20160222 rmin: 0 rmax: 88.5 dr: 0.1 zmin: 0 zmax: 600 dz: 0.1 Number of points in z = 6000 Number of points in r = 885 JANA >>154921 entries found (Creating DGeometry: JANA >> Run requested:11366 found:11366 JANA >> Run validity range: 11366-11366 JANA >> URL="ccdb:///GEOMETRY/main_HDDS.xml" context="default" JANA >> Type="JGeometryXML" JANA >>Found 25 material maps in calib. DB JANA >>Read in 25 material maps for run 11366 containing 76153 grid points total JANA >> JANA >>Reading Pair Spectrometer Magnetic field map from Magnets/PairSpectrometer/PS_1.8T_20150513_test ... Nx=40 Ny=1 Nz=121 ) at 0x7475ae0 RZOPEN. record length: 65536 > maximum safe value (8191 words). RZOPEN. Automatic record length determination will not work with this file. RZOPEN. You may have problems transferring your file to other systems or writing it to tape. RZMAKE. Unit 1011 Initializing with LREC= 65536, OPT= X?C MZLINK. Initialize Link Area RZCL for Store 0 NL/NS= 11 0 MZLINK. Initialize Link Area /GCHVIR/ for Store 0 NL/NS= 4 1 MZLINK. Initialize Link Area /GCDINA/ for Store 0 NL/NS= 4 4 1************************************************************ * * * G E A N T Version 3.2114 DATE/TIME 200102/1816 * * * * R U N 11366 * * * ************************************************************ * * * Data structure Date Time GVERSN ZVERSN * * -------------- ---- ---- ------ ------ * * * * INIT 200102 1816 3.2114 3.79 * * * * KINE 200102 1816 3.2114 3.79 * * * * HITS 200102 1816 3.2114 3.79 * * * * DIGI 200102 1816 3.2114 3.79 * * * * Random number seeds: 1315342834 425995190 * * -------------------- * * * *----------------------------------------------------------* * * * Standard TPAR for this run are * * ------------------------------ * * * * CUTGAM= 1.00 MeV CUTELE= 1.00 MeV CUTNEU= 10.00 MeV * * CUTHAD= 10.00 MeV CUTMUO= 10.00 MeV * * BCUTE = 1.00 MeV BCUTM = 1.00 MeV * * DCUTE = 1.00 MeV DCUTM = 1.00 MeV PPCUTM= 10.00 MeV * * IPAIR = 1. ICOMP = 1. IPHOT = 1. * * IPFIS = 0. IDRAY = 1. IANNI = 1. * * IBREM = 1. IHADR = 1. IMUNU = 1. * * IDCAY = 1. ILOSS = 1. IMULS = 1. * * IRAYL = 0. ILABS = 0. ISYNC = 0. * * ISTRA = 0. * * * * * ************************************************************ RZMAKE. Unit 3 Initializing with LREC= 1024, OPT= ON X RZMAKE. new RZ format selected. This file will not be readable with versions of RZ prior to release 94B *** GROUT *** Data structure DRAW version 1 saved to disk *** GROUT *** Data structure MATE version 1 saved to disk *** GROUT *** Data structure PART version 1 saved to disk *** GROUT *** Data structure ROTM version 1 saved to disk *** GROUT *** Data structure RUNG version 1 saved to disk *** GROUT *** Data structure SETS was not found *** GROUT *** Data structure TMED version 1 saved to disk RZOUT . Cannot find the 346 records requested *** GROUT *** Error in writing data structure VOLU to disk *** GROUT *** Data structure SCAN was not found RZEND. called for LUN3 settofg: beam_bucket_period_ns set to 4.00801611 ns 0 events simulated settofg: RF reference plane set to 65.0000000 cm Error [1270]: in [MySQLDataProvider::GetAssignmentShort(int, const string&, time_t, const string&)] No data was selected. Table '/PHOTON_BEAM/hodoscope/endpoint_calib' for run='11366', timestampt='0' and variation='default' TAGGER: ALL parameters loaded from Data Base START: ALL parameters loaded from Data Base CDC: ALL parameters loaded from Data Base BCAL/bcal_parms: ALL parameters loaded from Data Base BCAL/mc_parms: ALL parameters loaded from Data Base FDC: ALL parameters loaded from Data Base TOF: ALL parameters loaded from Data Base FCAL: ALL parameters loaded from Data Base 10 events simulated 20 events simulated 30 events simulated WARNING: The BCAL records information about certain particles entering it so that information can be used later in mcsmear to properly smear the signals. For this event, more than the maximum number of incident particles has occurred (100) so the list is being truncated to the first 100. All of the signal in the BCAL is still being recorded, but the smearing may be off by a few percent for this event. It is probably nothing to worry about. This long message will only appear once and the following line just once per event whenever this occurs. programs/Simulation/HDGeant/hitBCal.cc:373 too many particles entering BCAL! Some information will be lost. 40 events simulated 50 events simulated 60 events simulated 70 events simulated 80 events simulated 90 events simulated 100 events simulated 200 events simulated 300 events simulated 400 events simulated 500 events simulated 600 events simulated 700 events simulated 800 events simulated 900 events simulated 1000 events simulated Warning in savehits: unsaved hit information found from sensitive volume FDA1, hit discarded. 2000 events simulated 3000 events simulated 4000 events simulated Warning in savehits: unsaved hit information found from sensitive volume FDA2, hit discarded. 5000 events simulated 6000 events simulated 7000 events simulated Warning in savehits: unsaved hit information found from sensitive volume FDA2, hit discarded. 8000 events simulated Warning in savehits: unsaved hit information found from sensitive volume FDA3, hit discarded. 9000 events simulated 1 **** NUMBER OF EVENTS PROCESSED = 10000 **** RANDOM NUMBER GENERATOR AFTER LAST COMPLETE EVENT 1265398185 490436222 **** TIME TO PROCESS ONE EVENT IS = 0.0721 SECONDS MZEND. Usage statistics for 2 dynamic stores. Map of store 0 /GCBANK/ ------------------------ Division Number of times Kind Max-size Garb-coll. Mode Position used allowed Wiped user auto Pushd Redcd 1 QDIV1 0 1 5203 0 4999968 0 0 0 0 0 2 QDIV2 1 1 3506899 184370 4999968 10000 0 0 0 0 19 system 1 8 3581074 68180 4999968 0 0 0 0 0 20 Constant 1 2 4999968 1333938 4000000 0 0 221 183 0 Map of store 1 /PAWC/ ------------------------ Division Number of times Kind Max-size Garb-coll. Mode Position used allowed Wiped user auto Pushd Redcd 1 QDIV1 0 1 2 0 4999585 0 0 0 0 0 2 QDIV2 1 1 4998185 1100 4999585 0 0 0 0 0 19 system 1 8 4998585 111 4999585 0 0 0 0 0 20 HIGZ 0 4 4998585 0 5000000 0 0 0 0 0 RZEND. called for RZFILE ***** Normal exit from Hall D GEANT ***** Running mcsmear ... JANA >> Enabling z compression of output HDDM file stream (default) JANA >> Enabling CRC data integrity check in output HDDM file stream JANA >>Launching threads . JANA >>Installing special signal handler for mcsmear... JANA >>Opening source "hdgeant.hddm" of type: HDDM JANA >>Created JCalibration object of type: JCalibrationCCDB JANA >>Generated via: JCalibration using CCDB for MySQL and SQLite databases JANA >>Run:11366 JANA >>URL: mysql://ccdb_user@hallddb.jlab.org/ccdb JANA >>context: variation=mc JANA >>comment: Variation for simulations with data conditions JANA >>checking context = variation=mc get BCAL/bcal_smear_parms_v2 parameters from CCDB... Get BCAL/digi_scales parameters from CCDB... Get BCAL/base_time_offset parameters from CCDB... Get BCAL/channel_mc_efficiency tables from CCDB... Get BCAL/ADC_saturation parameters from CCDB... Get BCAL/SiPM_saturation parameters from CCDB... JANA >>Creating DGeometry: JANA >> Run requested:11366 found:11366 JANA >> Run validity range: 11366-11366 JANA >> URL="ccdb:///GEOMETRY/main_HDDS.xml" context="default" JANA >> Type="JGeometryXML" JANA >>Found 25 material maps in calib. DB JANA >>Read in 25 material maps for run 11366 containing 76153 grid points total Get FCAL/fcal_parms parameters from CCDB... get FCAL/gains from calibDB get FCAL/pedestals from calibDB get FCAL/MC/pedestal_rms from calibDB get FCAL/MC/integral_peak_ratio from calibDB get FCAL/MC/threshold from calibDB get FCAL/MC/threhsold_scaling from calibDB get FCAL/MC/mc_escale from calibDB get FCAL/MC/energy_width_floor from calibDB get FCAL/digi_scales parameters from calibDB get FCAL/mc_timing_smear parameters from calibDB JANA >>get CDC/cdc_parms parameters from CCDB... JANA >>get CDC/digi_scales parameters from CCDB... JANA >>get CDC/gain_doca_correction parameters from CCDB... Get FDC/fdc_parms parameters from CCDB... src/JANA/JGeometryXML.cc:348 Node or attribute not found for xpath "//composition[@name='forwardTOF_bottom3']/mposY[@volume='FTOL']/@ncopy". src/JANA/JGeometryXML.cc:348 Node or attribute not found for xpath "//composition[@name='forwardTOF_top3']/mposY[@volume='FTOL']/@ncopy". src/JANA/JGeometryXML.cc:348 Node or attribute not found for xpath "//composition[@name='forwardTOF_bottom3']/mposY[@volume='FTOL']/@ncopy". src/JANA/JGeometryXML.cc:348 Node or attribute not found for xpath "//composition[@name='forwardTOF_top3']/mposY[@volume='FTOL']/@ncopy". Get TOF/tof_parms parameters from CCDB... get TOF/paddle_resolutions from calibDB **************************************** TOF BARS = 44 **************************************** Get START_COUNTER/start_parms parameters from CCDB... get START_COUNTER/paddle_mc_efficiency from calibDB Get CCAL/mc_energy parameters from CCDB... Error [1270]: in [MySQLDataProvider::GetAssignmentShort(int, const string&, time_t, const string&)] No data was selected. Table '/CCAL/mc_energy' for run='11366', timestampt='0' and variation='default' get CCAL/mc_time parameters from calibDB JANA ERROR>>Problem loading CCAL/mc_energy from CCDB! Error [1270]: in [MySQLDataProvider::GetAssignmentShort(int, const string&, time_t, const string&)] No data was selected. Table '/CCAL/mc_time' for run='11366', timestampt='0' and variation='default' JANA >>Finished initializing detector smearing ... JANA ERROR>>Problem loading CCAL/mc_time from CCDB! Warning: simulation geometry checksum does not match the geometry description used by mcsmear. JANA >> Factory Call Stack JANA >>============================ JANA >> JEventLoop:OneEvent (evnt) -- line:695 src/JANA/JEventLoop.cc JANA >>---------------------------- src/JANA/JEventLoop.cc:698  EXCEPTION : vector::_M_range_check src/JANA/JApplication.cc:1386  EXCEPTION caught for thread 140646769354496 : std::exception JANA ERROR>> JANA ERROR>> Automatic relaunching of threads is disabled. If you wish to JANA ERROR>> have the program relaunch a replacement thread when a stalled JANA ERROR>> one is killed, set the JANA:MAX_RELAUNCH_THREADS configuration JANA ERROR>> parameter to a value greater than zero. E.g.: JANA ERROR>> JANA ERROR>> jana -PJANA:MAX_RELAUNCH_THREADS=10 JANA ERROR>> JANA ERROR>> The program wilJANA >> l quit now. JANA >>Telling all threads to quit ... JANA >>Merging thread 0 (0x7feae0b9e700) ... Closed HDDM file 0 event written to hdgeant_smeared.hddm JANA >>Merging event reader thread ... JANA >> 1 events processed (11 events read) Average rate: 0.0Hz Running hd_root with danarest ... JANA >>OUTPUT_FILENAME: hd_root.root JANA >>Initializing plugin "/u/scratch/gluex/nightly/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/halld_recon/Linux_RHEL7-x86_64-gcc4.8.5/plugins/danarest.so" ... Opened ROOT file "hd_root.root" ... JANA >>Opening source "hdgeant_smeared.hddm" of type: HDDM JANA >>Launching threads . JANA >> JANA >>No more event sources JANA >>Thread 0x7f2693398700 completed gracefully: Thu Jan 2 18:29:49 2020 JANA >>Merging thread 0 (0x7f2693398700) ... JANA >>Merging event reader thread ... JANA >> 0 events processed (0 events read) Average rate: 0.0Hz Closed ROOT file JANA >>Closing shared object handle 0 ... Running hd_root with b1pi_hists & monitoring_hists ... JANA >>OUTPUT_FILENAME: hd_root.root JANA >>Initializing plugin "/u/scratch/gluex/nightly/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/halld_recon/Linux_RHEL7-x86_64-gcc4.8.5/plugins/b1pi_hists.so" ... JANA >>Initializing plugin "/u/scratch/gluex/nightly/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/halld_recon/Linux_RHEL7-x86_64-gcc4.8.5/plugins/monitoring_hists.so" ... Opened ROOT file "hd_root.root" ... JANA ERROR>> JANA ERROR>> xxxxxxxxxxxx Unable to open event source "dana_rest.hddm"! xxxxxxxxxxxx JANA ERROR>> JANA ERROR>> xxxxxxxxxxxx NO VALID EVENT SOURCES GIVEN !!! xxxxxxxxxxxx JANA ERROR>> JANA >> JANA >>Telling all threads to quit ... JANA >>Launching threads . JANA >> JANA >>Telling all threads to quit ... JANA >>Merging event reader thread ... JANA >> 0 events processed (0 events read) Average rate: 0.0Hz Closed ROOT file JANA >>Closing shared object handle 0 ... JANA >>Closing shared object handle 1 ... Exit code: 66 Create plots ------------------------------------------------------------ | Welcome to ROOT 6.08/06 http://root.cern.ch | | (c) 1995-2016, The ROOT Team | | Built for linuxx8664gcc | | From tag v6-08-06, 2 March 2017 | | Try '.help', '.demo', '.license', '.credits', '.quit'/'.q' | ------------------------------------------------------------ Processing mk_pics.C... #0 0x00007fcca402a45c in waitpid () from /lib64/libc.so.6 #1 0x00007fcca3fa7f52 in do_system () from /lib64/libc.so.6 #2 0x00007fcca502db19 in TUnixSystem::StackTrace (this=0x14aa8e0) at /u/group/halld/Software/builds/Linux_RHEL7-x86_64-gcc4.8.5/root/root-6.08.06/core/unix/src/TUnixSystem.cxx:2405 #3 0x00007fcca0523af5 in cling::MultiplexInterpreterCallbacks::PrintStackTrace() () from /u/group/halld/Software/builds/Linux_RHEL7-x86_64-gcc4.8.5/root/root-6.08.06/lib/libCling.so #4 0x00007fcca0523468 in cling_runtime_internal_throwIfInvalidPointer () from /u/group/halld/Software/builds/Linux_RHEL7-x86_64-gcc4.8.5/root/root-6.08.06/lib/libCling.so #5 0x00007fcca57664ae in ?? () #6 0x00007ffe51a41b80 in ?? () #7 0x00000000021749e0 in ?? () #8 0x0000000000000000 in ?? () terminate called after throwing an instance of 'cling::InvalidDerefException' what(): Trying to dereference null pointer or trying to call routine taking non-null arguments Save test data Traceback (most recent call last): File "update_db.py", line 28, in with open("data.txt") as f: IOError: [Errno 2] No such file or directory: 'data.txt' #count events /group/halld/Software/hd_utilities/b1pi_test/b1pi_cron_one.sh: line 27: hddm_counter.pl: command not found #count b1_pi.hddm /group/halld/Software/hd_utilities/b1pi_test/b1pi_cron_one.sh: line 28: hddm_counter.pl: command not found #count hdgeant.hddm /group/halld/Software/hd_utilities/b1pi_test/b1pi_cron_one.sh: line 29: hddm_counter.pl: command not found #count hdgeant_smeared.hddm /group/halld/Software/hd_utilities/b1pi_test/b1pi_cron_one.sh: line 30: hddm_counter.pl: command not found #count dana_rest.hddm /group/halld/Software/hd_utilities/b1pi_test/b1pi_cron_one.sh: line 31: hddm_counter.pl: command not found #count dana_rest_b1pi.hddm cp: cannot stat ‘*.pdf’: No such file or directory cp: cannot stat ‘*.gif’: No such file or directory ‘index.html’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run11366/index.html’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_cron_one.sh’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_cron.sh’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1_pi.input’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_message.sh’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_test.sh’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/hddm_counter.pl’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/index.html’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/my_b1pi_test.sh’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/README’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/anal1.C’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1_pi.C’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_gen.C’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_gen.h’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1_pi.h’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_rec.C’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_rec.h’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/fit_voigt.C’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/makeallplots.C’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/mass_X.C’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/mk_pics.C’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/momentum.C’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/StandardLabels.C’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/theta.C’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/update_db.py’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1_pi.ascii’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1_pi.hddm’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/control.in’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/hdgeant.hddm’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/geant.hbook’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/hdgeant.rz’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/smear.root’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/hdgeant_smeared.hddm’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/dana_rest.hddm’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/hd_root.root’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/tree_b1pi.root’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_protons.pdf’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_protons.gif’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_protons_theta.pdf’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_protons_theta.gif’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_protons_phi.pdf’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_protons_phi.gif’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_protons_vertex.pdf’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_protons_vertex.gif’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_photons.pdf’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_photons.gif’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_photons_theta.pdf’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_photons_theta.gif’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_photons_theta_zoom.pdf’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_photons_theta_zoom.gif’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_photons_phi.pdf’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_photons_phi.gif’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_piplus.pdf’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_piplus.gif’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_piplus_theta.pdf’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_piplus_theta.gif’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_piplus_phi.pdf’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_piplus_phi.gif’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_piplus_vertex.pdf’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_piplus_vertex.gif’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_piminus.pdf’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_piminus.gif’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_piminus_theta.pdf’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_piminus_theta.gif’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_piminus_phi.pdf’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_piminus_phi.gif’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_piminus_vertex.pdf’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_piminus_vertex.gif’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_pi0Mass.pdf’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_pi0Mass.gif’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_omegaMass.pdf’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_omegaMass.gif’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_b1Mass.pdf’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_b1Mass.gif’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_XMass.pdf’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/b1pi_standardtest_XMass.gif’ removed ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480/data.txt’ removed directory: ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480’ mkdir: created directory ‘/u/scratch/gluex/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/30480’ info: number of threads not defined, using default value 1 info: vertex parameters not defined, using default values 0 0 50 80 NEVENTS = 10000 VERTEX = 0 0 50 80 NTHREADS = 1 B1PI_TEST_DIR = /group/halld/Software/scripts/b1pi_test RUN = 30480 Copying script files and macros ... ‘/group/halld/Software/scripts/b1pi_test/b1pi_cron_one.sh’ -> ‘./b1pi_cron_one.sh’ ‘/group/halld/Software/scripts/b1pi_test/b1pi_cron.sh’ -> ‘./b1pi_cron.sh’ ‘/group/halld/Software/scripts/b1pi_test/b1_pi.input’ -> ‘./b1_pi.input’ ‘/group/halld/Software/scripts/b1pi_test/b1pi_message.sh’ -> ‘./b1pi_message.sh’ ‘/group/halld/Software/scripts/b1pi_test/b1pi_test.sh’ -> ‘./b1pi_test.sh’ ‘/group/halld/Software/scripts/b1pi_test/hddm_counter.pl’ -> ‘./hddm_counter.pl’ ‘/group/halld/Software/scripts/b1pi_test/index.html’ -> ‘./index.html’ cp: omitting directory ‘/group/halld/Software/scripts/b1pi_test/macros’ ‘/group/halld/Software/scripts/b1pi_test/my_b1pi_test.sh’ -> ‘./my_b1pi_test.sh’ ‘/group/halld/Software/scripts/b1pi_test/README’ -> ‘./README’ ‘/group/halld/Software/scripts/b1pi_test/macros/anal1.C’ -> ‘./anal1.C’ ‘/group/halld/Software/scripts/b1pi_test/macros/b1_pi.C’ -> ‘./b1_pi.C’ ‘/group/halld/Software/scripts/b1pi_test/macros/b1pi_gen.C’ -> ‘./b1pi_gen.C’ ‘/group/halld/Software/scripts/b1pi_test/macros/b1pi_gen.h’ -> ‘./b1pi_gen.h’ ‘/group/halld/Software/scripts/b1pi_test/macros/b1_pi.h’ -> ‘./b1_pi.h’ ‘/group/halld/Software/scripts/b1pi_test/macros/b1pi_rec.C’ -> ‘./b1pi_rec.C’ ‘/group/halld/Software/scripts/b1pi_test/macros/b1pi_rec.h’ -> ‘./b1pi_rec.h’ ‘/group/halld/Software/scripts/b1pi_test/macros/fit_voigt.C’ -> ‘./fit_voigt.C’ ‘/group/halld/Software/scripts/b1pi_test/macros/makeallplots.C’ -> ‘./makeallplots.C’ ‘/group/halld/Software/scripts/b1pi_test/macros/mass_X.C’ -> ‘./mass_X.C’ ‘/group/halld/Software/scripts/b1pi_test/macros/mk_pics.C’ -> ‘./mk_pics.C’ ‘/group/halld/Software/scripts/b1pi_test/macros/momentum.C’ -> ‘./momentum.C’ ‘/group/halld/Software/scripts/b1pi_test/macros/StandardLabels.C’ -> ‘./StandardLabels.C’ ‘/group/halld/Software/scripts/b1pi_test/macros/theta.C’ -> ‘./theta.C’ ‘/group/halld/Software/scripts/b1pi_test/macros/update_db.py’ -> ‘./update_db.py’ Running genr8 ... Using runNo: 30480 Maximum number of events: 10000 Opening file b1_pi.ascii for output. Reading: beamp.x beamp.y beamp.z beamMass Found: 0.000000 0.000000 9.000000 0.000000 Reading: targetp.x targetp.y targetp.z targetMass Found: 0.000000 0.000000 0.000000 0.938000 Reading: t-channelSlope Found: 5.000000 Reading: number of particles need to describe the decay Found: 12 Reading: part# chld1# chld2# prnt# Id nchld mass width chrg flag Found: 0 -1 -1 -1 14 0 0.938000 0.000000 1 11 Found: 1 2 3 -1 0 2 2.000000 0.100000 1 0 Found: 2 4 5 1 0 2 1.235000 0.142000 1 0 Found: 3 4 5 1 9 0 0.140000 0.000000 -1 11 Found: 4 6 7 2 0 2 0.783000 0.009000 0 0 Found: 5 6 7 2 8 0 0.140000 0.000000 1 11 Found: 6 8 9 4 0 2 0.776000 0.150000 0 0 Found: 7 10 11 4 7 2 0.135000 0.000000 0 0 Found: 8 10 11 6 8 0 0.140000 0.000000 1 11 Found: 9 10 11 6 9 0 0.140000 0.000000 -1 11 Found: 10 10 11 7 1 0 0.000000 0.000000 0 11 Found: 11 10 11 7 1 0 0.000000 0.000000 0 11 Found EOI---- Input File appears Fine. Calculating Lorentz Factor: 9000 Calculating Lorentz Factor: 8000 Calculating Lorentz Factor: 7000 Calculating Lorentz Factor: 6000 Calculating Lorentz Factor: 5000 Calculating Lorentz Factor: 4000 Calculating Lorentz Factor: 3000 Calculating Lorentz Factor: 2000 Calculating Lorentz Factor: 1000 Calculating Lorentz Factor: 100 Calculating Lorentz Factor: 90 Calculating Lorentz Factor: 80 Calculating Lorentz Factor: 70 Calculating Lorentz Factor: 60 Calculating Lorentz Factor: 50 Calculating Lorentz Factor: 40 Calculating Lorentz Factor: 30 Calculating Lorentz Factor: 20 Calculating Lorentz Factor: 10 Calculating Lorentz Factor: 0 Events generated: 100 Events accepted: 49 Events generated: 200 Events accepted: 101 Events generated: 300 Events accepted: 152 Events generated: 400 Events accepted: 195 Events generated: 500 Events accepted: 243 Events generated: 600 Events accepted: 293 Events generated: 700 Events accepted: 342 Events generated: 800 Events accepted: 388 Events generated: 900 Events accepted: 428 Events generated: 1000 Events accepted: 475 Events generated: 10000 Events accepted: 4862 Events generated: 20000 Events accepted: 9678 Max Lorentz Factor:0.001246 Events generated:20641 Events accepted:10000 Setting random number seed to: 1578011879 Converting generated events to HDDM ... Wrote event 1000 Wrote event 2000 Wrote event 3000 Wrote event 4000 Wrote event 5000 Wrote event 6000 Wrote event 7000 Wrote event 8000 Wrote event 9000 Wrote event 10000 Wrote 10000 events to b1_pi.hddm Creating control.in file ... Running hdgeant ... MZSTOR. ZEBRA table base TAB(0) in /MZCC/ at adr 19813839 12E55CF HEX MZSTOR. Initialize Store 0 in /GCBANK/ with Store/Table at absolute adrs 14251589 19813839 HEX D97645 12E55CF HEX FFAB1E9A 0 relative adrs -5562726 0 with 1 Str. in 2 Links in 5300 Low words in 4999970 words. This store has a fence of 16 words. MZLOGL. Set Log Level 0 for store 0 MZSTOR. Initialize Store 1 in /PAWC/ with Store/Table at absolute adrs 9251577 14251168 HEX 8D2AF9 D974A0 HEX FF5ED34E FFAB1ED1 relative adrs -10562738 -5562671 with 1 Str. in 1 Links in 5001 Low words in 4999990 words. This store has a fence of 5 words. MZLINK. Initialize Link Area /HCBOOK/ for Store 1 NL/NS= 49 4 MZDIV. Initialize Division HIGZ in Store 1 NW/NWMAX= 10005000000, MODE/KIND= 0 3 Division 20 initialized. MZLINK. Initialize Link Area /HILINK/ for Store 1 NL/NS= 42 2 Version 1.29/04 of HIGZ started 1***** GEANT Version 3.21/14 Released on 19032002 0***** Correction Cradle Version 0.1400 MODE VERSION 1.00 : MZDIV. Initialize Division Constant in Store 0 NW/NWMAX= 20004000000, MODE/KIND= 1 2 Division 20 initialized. MZLINK. Initialize Link Area /GCLINK/ for Store 0 NL/NS= 20 20 MZLINK. Initialize Link Area /GCSLNK/ for Store 0 NL/NS= 100 100 JANA >>Created JCalibration object of type: JCalibrationCCDB JANA >>Generated via: JCalibration using CCDB for MySQL and SQLite databases JANA >>Run:30480 JANA >>URL: mysql://ccdb_user@hallddb.jlab.org/ccdb JANA >>context: variation=mc JANA >>comment: Variation for simulations with data conditions JANA >>Reading Magnetic field map from Magnets/Solenoid/solenoid_1350A_poisson_20160222 ... Nx=221 Ny=1 Nz=701 ) at 0x61de040 Reading fine-mesh B-field data from /group/halld/www/halldweb/html/resources/Magnets/Solenoid/finemeshes/solenoid_1350A_poisson_20160222 rmin: 0 rmax: 88.5 dr: 0.1 zmin: 0 zmax: 600 dz: 0.1 Number of points in z = 6000 Number of points in r = 885 JANA >>154921 entries found (Creating DGeometry: JANA >> Run requested:30480 found:30480 JANA >> Run validity range: 30480-30480 JANA >> URL="ccdb:///GEOMETRY/main_HDDS.xml" context="default" JANA >> Type="JGeometryXML" JANA >>Found 25 material maps in calib. DB JANA >>Read in 25 material maps for run 30480 containing 76153 grid points total JANA >> JANA >>Reading Pair Spectrometer Magnetic field map from Magnets/PairSpectrometer/PS_1.8T_20150513_test ... Nx=40 Ny=1 Nz=121 ) at 0x6239150 RZOPEN. record length: 65536 > maximum safe value (8191 words). RZOPEN. Automatic record length determination will not work with this file. RZOPEN. You may have problems transferring your file to other systems or writing it to tape. RZMAKE. Unit 1011 Initializing with LREC= 65536, OPT= X?C MZLINK. Initialize Link Area RZCL for Store 0 NL/NS= 11 0 MZLINK. Initialize Link Area /GCHVIR/ for Store 0 NL/NS= 4 1 MZLINK. Initialize Link Area /GCDINA/ for Store 0 NL/NS= 4 4 1************************************************************ * * * G E A N T Version 3.2114 DATE/TIME 200102/1830 * * * * R U N 30480 * * * ************************************************************ * * * Data structure Date Time GVERSN ZVERSN * * -------------- ---- ---- ------ ------ * * * * INIT 200102 1830 3.2114 3.79 * * * * KINE 200102 1830 3.2114 3.79 * * * * HITS 200102 1830 3.2114 3.79 * * * * DIGI 200102 1830 3.2114 3.79 * * * * Random number seeds: 1315342834 425995190 * * -------------------- * * * *----------------------------------------------------------* * * * Standard TPAR for this run are * * ------------------------------ * * * * CUTGAM= 1.00 MeV CUTELE= 1.00 MeV CUTNEU= 10.00 MeV * * CUTHAD= 10.00 MeV CUTMUO= 10.00 MeV * * BCUTE = 1.00 MeV BCUTM = 1.00 MeV * * DCUTE = 1.00 MeV DCUTM = 1.00 MeV PPCUTM= 10.00 MeV * * IPAIR = 1. ICOMP = 1. IPHOT = 1. * * IPFIS = 0. IDRAY = 1. IANNI = 1. * * IBREM = 1. IHADR = 1. IMUNU = 1. * * IDCAY = 1. ILOSS = 1. IMULS = 1. * * IRAYL = 0. ILABS = 0. ISYNC = 0. * * ISTRA = 0. * * * * * ************************************************************ RZMAKE. Unit 3 Initializing with LREC= 1024, OPT= ON X RZMAKE. new RZ format selected. This file will not be readable with versions of RZ prior to release 94B *** GROUT *** Data structure DRAW version 1 saved to disk *** GROUT *** Data structure MATE version 1 saved to disk *** GROUT *** Data structure PART version 1 saved to disk *** GROUT *** Data structure ROTM version 1 saved to disk *** GROUT *** Data structure RUNG version 1 saved to disk *** GROUT *** Data structure SETS was not found *** GROUT *** Data structure TMED version 1 saved to disk RZOUT . Cannot find the 346 records requested *** GROUT *** Error in writing data structure VOLU to disk *** GROUT *** Data structure SCAN was not found RZEND. called for LUN3 settofg: beam_bucket_period_ns set to 4.00801611 ns 0 events simulated settofg: RF reference plane set to 65.0000000 cm Error [1270]: in [MySQLDataProvider::GetAssignmentShort(int, const string&, time_t, const string&)] No data was selected. Table '/PHOTON_BEAM/hodoscope/endpoint_calib' for run='30480', timestampt='0' and variation='default' TAGGER: ALL parameters loaded from Data Base START: ALL parameters loaded from Data Base CDC: ALL parameters loaded from Data Base BCAL/bcal_parms: ALL parameters loaded from Data Base BCAL/mc_parms: ALL parameters loaded from Data Base FDC: ALL parameters loaded from Data Base TOF: ALL parameters loaded from Data Base FCAL: ALL parameters loaded from Data Base 10 events simulated 20 events simulated 30 events simulated WARNING: The BCAL records information about certain particles entering it so that information can be used later in mcsmear to properly smear the signals. For this event, more than the maximum number of incident particles has occurred (100) so the list is being truncated to the first 100. All of the signal in the BCAL is still being recorded, but the smearing may be off by a few percent for this event. It is probably nothing to worry about. This long message will only appear once and the following line just once per event whenever this occurs. programs/Simulation/HDGeant/hitBCal.cc:373 too many particles entering BCAL! Some information will be lost. 40 events simulated 50 events simulated 60 events simulated 70 events simulated 80 events simulated 90 events simulated 100 events simulated 200 events simulated 300 events simulated 400 events simulated 500 events simulated 600 events simulated 700 events simulated 800 events simulated 900 events simulated 1000 events simulated 2000 events simulated *** GTRACK *** More than 100000 steps, tracking abandoned! IEVENT= 2731 IDEVT= 2731 Random Seeds = 1011135037 412391751 Track 15 stack 0 NTMULT 24 NEUTRON Time of flight 19.173 ns 3000 events simulated Warning in savehits: unsaved hit information found from sensitive volume FDA3, hit discarded. 4000 events simulated Warning in savehits: unsaved hit information found from sensitive volume FDA4, hit discarded. 5000 events simulated 6000 events simulated 7000 events simulated Warning in savehits: unsaved hit information found from sensitive volume FDA4, hit discarded. 8000 events simulated Warning in savehits: unsaved hit information found from sensitive volume FDA4, hit discarded. 9000 events simulated Warning in savehits: unsaved hit information found from sensitive volume FDA3, hit discarded. 1 **** NUMBER OF EVENTS PROCESSED = 10000 **** RANDOM NUMBER GENERATOR AFTER LAST COMPLETE EVENT 900892400 765125044 **** TIME TO PROCESS ONE EVENT IS = 0.0725 SECONDS MZEND. Usage statistics for 2 dynamic stores. Map of store 0 /GCBANK/ ------------------------ Division Number of times Kind Max-size Garb-coll. Mode Position used allowed Wiped user auto Pushd Redcd 1 QDIV1 0 1 5203 0 4999968 0 0 0 0 0 2 QDIV2 1 1 3506899 196711 4999968 10000 0 0 0 0 19 system 1 8 3581074 68180 4999968 0 0 0 0 0 20 Constant 1 2 4999968 1333938 4000000 0 0 221 183 0 Map of store 1 /PAWC/ ------------------------ Division Number of times Kind Max-size Garb-coll. Mode Position used allowed Wiped user auto Pushd Redcd 1 QDIV1 0 1 2 0 4999585 0 0 0 0 0 2 QDIV2 1 1 4998185 1100 4999585 0 0 0 0 0 19 system 1 8 4998585 111 4999585 0 0 0 0 0 20 HIGZ 0 4 4998585 0 5000000 0 0 0 0 0 RZEND. called for RZFILE ***** Normal exit from Hall D GEANT ***** Running mcsmear ... JANA >> Enabling z compression of output HDDM file stream (default) JANA >> Enabling CRC data integrity check in output HDDM file stream JANA >>Launching threads . JANA >>Installing special signal handler for mcsmear... JANA >>Opening source "hdgeant.hddm" of type: HDDM JANA >>Created JCalibration object of type: JCalibrationCCDB JANA >>Generated via: JCalibration using CCDB for MySQL and SQLite databases JANA >>Run:30480 JANA >>URL: mysql://ccdb_user@hallddb.jlab.org/ccdb JANA >>context: variation=mc JANA >>comment: Variation for simulations with data conditions JANA >>checking context = variation=mc get BCAL/bcal_smear_parms_v2 parameters from CCDB... Get BCAL/digi_scales parameters from CCDB... Get BCAL/base_time_offset parameters from CCDB... Get BCAL/channel_mc_efficiency tables from CCDB... Get BCAL/ADC_saturation parameters from CCDB... Get BCAL/SiPM_saturation parameters from CCDB... JANA >>Creating DGeometry: JANA >> Run requested:30480 found:30480 JANA >> Run validity range: 30480-30480 JANA >> URL="ccdb:///GEOMETRY/main_HDDS.xml" context="default" JANA >> Type="JGeometryXML" JANA >>Found 25 material maps in calib. DB JANA >>Read in 25 material maps for run 30480 containing 76153 grid points total Get FCAL/fcal_parms parameters from CCDB... get FCAL/gains from calibDB get FCAL/pedestals from calibDB get FCAL/MC/pedestal_rms from calibDB get FCAL/MC/integral_peak_ratio from calibDB get FCAL/MC/threshold from calibDB get FCAL/MC/threhsold_scaling from calibDB get FCAL/MC/mc_escale from calibDB get FCAL/MC/energy_width_floor from calibDB get FCAL/digi_scales parameters from calibDB get FCAL/mc_timing_smear parameters from calibDB JANA >>get CDC/cdc_parms parameters from CCDB... JANA >>get CDC/digi_scales parameters from CCDB... JANA >>get CDC/gain_doca_correction parameters from CCDB... Get FDC/fdc_parms parameters from CCDB... src/JANA/JGeometryXML.cc:348 Node or attribute not found for xpath "//composition[@name='forwardTOF_bottom3']/mposY[@volume='FTOL']/@ncopy". src/JANA/JGeometryXML.cc:348 Node or attribute not found for xpath "//composition[@name='forwardTOF_top3']/mposY[@volume='FTOL']/@ncopy". src/JANA/JGeometryXML.cc:348 Node or attribute not found for xpath "//composition[@name='forwardTOF_bottom3']/mposY[@volume='FTOL']/@ncopy". src/JANA/JGeometryXML.cc:348 Node or attribute not found for xpath "//composition[@name='forwardTOF_top3']/mposY[@volume='FTOL']/@ncopy". Get TOF/tof_parms parameters from CCDB... get TOF/paddle_resolutions from calibDB **************************************** TOF BARS = 44 **************************************** Get START_COUNTER/start_parms parameters from CCDB... get START_COUNTER/paddle_mc_efficiency from calibDB Get CCAL/mc_energy parameters from CCDB... Error [1270]: in [MySQLDataProvider::GetAssignmentShort(int, const string&, time_t, const string&)] No data was selected. Table '/CCAL/mc_energy' for run='30480', timestampt='0' and variation='default' JANA ERROR>>Problem loading Cget CCAL/mc_time parameters from calibDB CAL/mc_energy from CCDB! Error [1270]: in [MySQLDataProvider::GetAssignmentShort(int, const string&, time_t, const string&)] No data was selected. Table '/CCAL/mc_time' for run='30480', timestampt='0' and variation='default' JANA >>Finished initializing detector smearing ... JANA ERROR>>Problem loading CCAL/mc_time from CCDB! Warning: simulation geometry checksum does not match the geometry description used by mcsmear. JANA >> JANA >> --- Configuration Parameters -- JANA >> JANA:BATCH_MODE = 1  JANA >> THREAD_TIMEOUT = 30 seconds JANA >> ------------------------------- JANA >> Factory Call Stack JANA >>============================ JANA >> JEventLoop:OneEvent (evnt) -- line:695 src/JANA/JEventLoop.cc JANA >>---------------------------- src/JANA/JEventLoop.cc:698  EXCEPTION : vector::_M_range_check src/JANA/JApplication.cc:1386  EXCEPTION caught for thread 139622748837632 : std::exception JANA ERROR>> JANA ERROR>> Automatic relaunching of threads is disabled. If you wish to JANA ERROR>> have the program relaunch a replacement thread when a stalled JANA ERROR>> one is killed, set the JANA:MAX_RELAUNCH_THREADS configuration JANA ERROR>> parameter to a value greater than zero. E.g.: JANA ERJANA >> JANA >>Telling all threads to quit ... JANA >>Merging thread 0 (0x7efc7458d700) ... ROR>> JANA ERROR>> jana -PJANA:MAX_RELAUNCH_THREADS=10 JANA ERROR>> JANA ERROR>> The program will quit now. Closed HDDM file 8 event written to hdgeant_smeared.hddm JANA >>Merging event reader thread ... JANA >> 9 events processed (19 events read) Average rate: 16.0Hz Running hd_root with danarest ... JANA >>OUTPUT_FILENAME: hd_root.root JANA >>Initializing plugin "/u/scratch/gluex/nightly/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/halld_recon/Linux_RHEL7-x86_64-gcc4.8.5/plugins/danarest.so" ... Opened ROOT file "hd_root.root" ... JANA >>Opening source "hdgeant_smeared.hddm" of type: HDDM JANA >>Launching threads . JANA >>Created JCalibration object of type: JCalibrationCCDB JANA >>Generated via: JCalibration using CCDB for MySQL and SQLite databases JANA >>Run:30480 JANA >>URL: mysql://ccdb_user@hallddb.jlab.org/ccdb JANA >>context: variation=mc JANA >>comment: Variation for simulations with data conditions JANA >>Creating DGeometry: JANA >> Run requested:30480 found:30480 JANA >> Run validity range: 30480-30480 JANA >> URL="ccdb:///GEOMETRY/main_HDDS.xml" context="default" JANA >> Type="JGeometryXML" JANA >>Found 25 material maps in calib. DB JANA >>Read in 25 material maps for run 30480 containing 76153 grid points total JANA >>Creating DTranslationTable for run 30480 JANA >>Reading translation table from calib DB: Translation/DAQ2detector ... JANA >>23166 channels defined in translation table Exception: FCAL channel is not in the translation table Crate = 14 Slot = 18 Channel = 15 ------------ Trigger Settings --------------- ----------- FCAL ----------- FCAL_CELL_THR = 165 FCAL_NSA = 10 FCAL_NSB = 3 FCAL_WINDOW = 10 ----------- BCAL ----------- BCAL_CELL_THR = 120 BCAL_NSA = 19 BCAL_NSB = 3 BCAL_WINDOW = 20 TYPE FCAL_E BCAL_E EN_THR NHIT LANE FCAL_EMIN FCAL_EMAX BCAL_EMIN BCAL_EMAX PATTERN BFCAL 25 1 45000 0 0 200 65535 0 65535 0x0 BFCAL 0 1 54000 0 2 0 0 0 0 0x0 PS 0 0 0 0 3 0 0 0 0 0x0 JANA >>In DL1MCTrigger_factory, loading constants... JANA >>In DBCALHit_factory, loading constants... src/JANA/JGeometryXML.cc:348 Node or attribute not found for xpath "//composition[@name='forwardTOF_bottom3']/mposY[@volume='FTOL']/@ncopy". src/JANA/JGeometryXML.cc:348 Node or attribute not found for xpath "//composition[@name='forwardTOF_top3']/mposY[@volume='FTOL']/@ncopy". src/JANA/JGeometryXML.cc:348 Node or attribute not found for xpath "//composition[@name='forwardTOF_bottom3']/mposY[@volume='FTOL']/@ncopy". src/JANA/JGeometryXML.cc:348 Node or attribute not found for xpath "//composition[@name='forwardTOF_top3']/mposY[@volume='FTOL']/@ncopy". JANA >>Reading Magnetic field map from Magnets/Solenoid/solenoid_1350A_poisson_20160222 ... Nx=221 Ny=1 Nz=701 ) at 0x7fe2c5f336b0 Reading fine-mesh B-field data from /group/halld/www/halldweb/html/resources/Magnets/Solenoid/finemeshes/solenoid_1350A_poisson_20160222 rmin: 0 rmax: 88.5 dr: 0.1 zmin: 0 zmax: 600 dz: 0.1 Number of points in z = 6000 Number of points in r = 885 JANA >>154921 entries found (Created Magnetic field map of type DMagneticFieldMapFineMesh src/JANA/JGeometryXML.cc:348 Node or attribute not found for xpath "//section/composition/posXYZ[@volume='DIRC']/@X_Y_Z". libraries/HDGEOMETRY/DGeometry.cc:1741 Unable to retrieve DIRC position. src/JANA/JGeometryXML.cc:348 Node or attribute not found for xpath "//section/composition/posXYZ[@volume='TRDGEM']/@X_Y_Z". libraries/HDGEOMETRY/DGeometry.cc:1767 Unable to retrieve TRD position. JANA >> Beam spot: x=0 y=0 z=65 dx/dz=0 dy/dz=0 JANA >>vertex constraint: Created TGeoManager :0x7fe2af012a90 src/JANA/JGeometryXML.cc:348 Node or attribute not found for xpath "//section/composition/posXYZ[@volume='DIRC']/@X_Y_Z". libraries/HDGEOMETRY/DGeometry.cc:1741 Unable to retrieve DIRC position. JANA >>in DBCALPoint_factory, loading constants ... JANA >>DBCALUnifiedHit_factory: Using ADC times only. JANA >>In DBCALTDCHit_factory, loading constants... JANA >>In DTRDHit_factory, loading constants... src/JANA/JGeometryXML.cc:348 Node or attribute not found for xpath "//section/composition/posXYZ[@volume='TRDGEM']/@X_Y_Z". libraries/HDGEOMETRY/DGeometry.cc:1767 Unable to retrieve TRD position. src/JANA/JGeometryXML.cc:348 Node or attribute not found for xpath "//section/composition/posXYZ[@volume='TRDGEM']/@X_Y_Z". libraries/HDGEOMETRY/DGeometry.cc:1767 Unable to retrieve TRD position. JANA >>In DGEMHit_factory, loading constants... JANA >> Enabling bz2 compression of output HDDM file stream JANA >> Enabling CRC data integrity check in output HDDM file stream JANA >> JANA >> --- Configuration Parameters -- JANA >> JANA:BATCH_MODE = 1  JANA >> JANA:RESOURCE_DEFAULT_PATH =  JANA >> PLUGINS = danarest  JANA >> THREAD_TIMEOUT = 30 seconds JANA >> ------------------------------- JANA >> JANA >>No more event sources JANA >>Thread 0x7fe2d2f92700 completed gracefully: Thu Jan 2 18:43:59 2020 JANA >>Merging thread 0 (0x7fe2d2f92700) ... Closed REST file dana_rest.hddm JANA >>Merging event reader thread ... JANA >> 8 events processed (8 events read) Average rate: 2.3Hz Closed ROOT file JANA >>Closing shared object handle 0 ... Running hd_root with b1pi_hists & monitoring_hists ... JANA >>OUTPUT_FILENAME: hd_root.root JANA >>Initializing plugin "/u/scratch/gluex/nightly/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/halld_recon/Linux_RHEL7-x86_64-gcc4.8.5/plugins/b1pi_hists.so" ... JANA >>Initializing plugin "/u/scratch/gluex/nightly/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/halld_recon/Linux_RHEL7-x86_64-gcc4.8.5/plugins/monitoring_hists.so" ... Opened ROOT file "hd_root.root" ... JANA >>Opening source "dana_rest.hddm" of type: REST | This is a REST event stream... JANA >>Launching threads . JANA >>Created JCalibration object of type: JCalibrationCCDB JANA >>Generated via: JCalibration using CCDB for MySQL and SQLite databases JANA >>Run:30480 JANA >>URL: mysql://ccdb_user@hallddb.jlab.org/ccdb JANA >>context: variation=mc JANA >>comment: Variation for simulations with data conditions JANA >>Creating DGeometry: JANA >> Run requested:30480 found:30480 JANA >> Run validity range: 30480-30480 JANA >> URL="ccdb:///GEOMETRY/main_HDDS.xml" context="default" JANA >> Type="JGeometryXML" JANA >>Found 25 material maps in calib. DB JANA >>Read in 25 material maps for run 30480 containing 76153 grid points total Created TGeoManager :0x7f2bf8fd4ea0 JANA >>Reading Magnetic field map from Magnets/Solenoid/solenoid_1350A_poisson_20160222 ... Nx=221 Ny=1 Nz=701 ) at 0x7f2bfa3f31a0 Reading fine-mesh B-field data from /group/halld/www/halldweb/html/resources/Magnets/Solenoid/finemeshes/solenoid_1350A_poisson_20160222 rmin: 0 rmax: 88.5 dr: 0.1 zmin: 0 zmax: 600 dz: 0.1 Number of points in z = 6000 Number of points in r = 885 JANA >>154921 entries found (Created Magnetic field map of type DMagneticFieldMapFineMesh src/JANA/JGeometryXML.cc:348 Node or attribute not found for xpath "//section/composition/posXYZ[@volume='DIRC']/@X_Y_Z". libraries/HDGEOMETRY/DGeometry.cc:1741 Unable to retrieve DIRC position. src/JANA/JGeometryXML.cc:348 Node or attribute not found for xpath "//section/composition/posXYZ[@volume='TRDGEM']/@X_Y_Z". libraries/HDGEOMETRY/DGeometry.cc:1767 Unable to retrieve TRD position. JANA >> Beam spot: x=0 y=0 z=65 dx/dz=0 dy/dz=0 JANA >>vertex constraint: src/JANA/JGeometryXML.cc:348 Node or attribute not found for xpath "//composition[@name='forwardTOF_bottom3']/mposY[@volume='FTOL']/@ncopy". src/JANA/JGeometryXML.cc:348 Node or attribute not found for xpath "//composition[@name='forwardTOF_top3']/mposY[@volume='FTOL']/@ncopy". src/JANA/JGeometryXML.cc:348 Node or attribute not found for xpath "//composition[@name='forwardTOF_bottom3']/mposY[@volume='FTOL']/@ncopy". src/JANA/JGeometryXML.cc:348 Node or attribute not found for xpath "//composition[@name='forwardTOF_top3']/mposY[@volume='FTOL']/@ncopy". Error [1270]: in [MySQLDataProvider::GetAssignmentShort(int, const string&, time_t, const string&)] No data was selected. Table '/PHOTON_BEAM/hodoscope/endpoint_calib' for run='30480', timestampt='0' and variation='default' JANA >>In DTOFHit_factory, loading constants... JANA >> JANA >> --- Configuration Parameters -- JANA >> JANA:BATCH_MODE = 1  JANA >> JANA:RESOURCE_DEFAULT_PATH =  JANA >> PLUGINS = b1pi_hists,monitoring_hists JANA >> THREAD_TIMEOUT = 30 seconds  JANA >> ------------------------------- JANA >> JANA >>No more event sources JANA >>Thread 0x7f2c04dd2700 completed gracefully: Thu Jan 2 18:44:15 2020 JANA >>Merging thread 0 (0x7f2c04dd2700) ... JANA >>Merging event reader thread ... JANA >> 8 events processed (8 events read) Average rate: 14.0Hz Closed ROOT file JANA >>Closing shared object handle 0 ... JANA >>Closing shared object handle 1 ... Create plots ------------------------------------------------------------ | Welcome to ROOT 6.08/06 http://root.cern.ch | | (c) 1995-2016, The ROOT Team | | Built for linuxx8664gcc | | From tag v6-08-06, 2 March 2017 | | Try '.help', '.demo', '.license', '.credits', '.quit'/'.q' | ------------------------------------------------------------ Processing mk_pics.C... Info in : pdf file b1pi_standardtest_protons.pdf has been created Info in : gif file b1pi_standardtest_protons.gif has been created Info in : pdf file b1pi_standardtest_protons_theta.pdf has been created Info in : gif file b1pi_standardtest_protons_theta.gif has been created Info in : pdf file b1pi_standardtest_protons_phi.pdf has been created Info in : gif file b1pi_standardtest_protons_phi.gif has been created Info in : pdf file b1pi_standardtest_protons_vertex.pdf has been created Info in : gif file b1pi_standardtest_protons_vertex.gif has been created Info in : pdf file b1pi_standardtest_photons.pdf has been created Info in : gif file b1pi_standardtest_photons.gif has been created Info in : pdf file b1pi_standardtest_photons_theta.pdf has been created Info in : gif file b1pi_standardtest_photons_theta.gif has been created Info in : pdf file b1pi_standardtest_photons_theta_zoom.pdf has been created Info in : gif file b1pi_standardtest_photons_theta_zoom.gif has been created Info in : pdf file b1pi_standardtest_photons_phi.pdf has been created Info in : gif file b1pi_standardtest_photons_phi.gif has been created Info in : pdf file b1pi_standardtest_piplus.pdf has been created Info in : gif file b1pi_standardtest_piplus.gif has been created Info in : pdf file b1pi_standardtest_piplus_theta.pdf has been created Info in : gif file b1pi_standardtest_piplus_theta.gif has been created Info in : pdf file b1pi_standardtest_piplus_phi.pdf has been created Info in : gif file b1pi_standardtest_piplus_phi.gif has been created Info in : pdf file b1pi_standardtest_piplus_vertex.pdf has been created Info in : gif file b1pi_standardtest_piplus_vertex.gif has been created Info in : pdf file b1pi_standardtest_piminus.pdf has been created Info in : gif file b1pi_standardtest_piminus.gif has been created Info in : pdf file b1pi_standardtest_piminus_theta.pdf has been created Info in : gif file b1pi_standardtest_piminus_theta.gif has been created Info in : pdf file b1pi_standardtest_piminus_phi.pdf has been created Info in : gif file b1pi_standardtest_piminus_phi.gif has been created Info in : pdf file b1pi_standardtest_piminus_vertex.pdf has been created Info in : gif file b1pi_standardtest_piminus_vertex.gif has been created Info in : pdf file b1pi_standardtest_pi0Mass.pdf has been created Info in : gif file b1pi_standardtest_pi0Mass.gif has been created Info in : pdf file b1pi_standardtest_omegaMass.pdf has been created Info in : gif file b1pi_standardtest_omegaMass.gif has been created Info in : pdf file b1pi_standardtest_b1Mass.pdf has been created Info in : gif file b1pi_standardtest_b1Mass.gif has been created Info in : pdf file b1pi_standardtest_XMass.pdf has been created Info in : gif file b1pi_standardtest_XMass.gif has been created Save test data #count events /group/halld/Software/hd_utilities/b1pi_test/b1pi_cron_one.sh: line 43: hddm_counter.pl: command not found #count b1_pi.hddm /group/halld/Software/hd_utilities/b1pi_test/b1pi_cron_one.sh: line 44: hddm_counter.pl: command not found #count hdgeant.hddm /group/halld/Software/hd_utilities/b1pi_test/b1pi_cron_one.sh: line 45: hddm_counter.pl: command not found #count hdgeant_smeared.hddm /group/halld/Software/hd_utilities/b1pi_test/b1pi_cron_one.sh: line 46: hddm_counter.pl: command not found #count dana_rest.hddm /group/halld/Software/hd_utilities/b1pi_test/b1pi_cron_one.sh: line 47: hddm_counter.pl: command not found #count dana_rest_b1pi.hddm ‘b1pi_standardtest_b1Mass.pdf’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_b1Mass.pdf’ ‘b1pi_standardtest_omegaMass.pdf’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_omegaMass.pdf’ ‘b1pi_standardtest_photons.pdf’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_photons.pdf’ ‘b1pi_standardtest_photons_phi.pdf’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_photons_phi.pdf’ ‘b1pi_standardtest_photons_theta.pdf’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_photons_theta.pdf’ ‘b1pi_standardtest_photons_theta_zoom.pdf’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_photons_theta_zoom.pdf’ ‘b1pi_standardtest_pi0Mass.pdf’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_pi0Mass.pdf’ ‘b1pi_standardtest_piminus.pdf’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_piminus.pdf’ ‘b1pi_standardtest_piminus_phi.pdf’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_piminus_phi.pdf’ ‘b1pi_standardtest_piminus_theta.pdf’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_piminus_theta.pdf’ ‘b1pi_standardtest_piminus_vertex.pdf’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_piminus_vertex.pdf’ ‘b1pi_standardtest_piplus.pdf’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_piplus.pdf’ ‘b1pi_standardtest_piplus_phi.pdf’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_piplus_phi.pdf’ ‘b1pi_standardtest_piplus_theta.pdf’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_piplus_theta.pdf’ ‘b1pi_standardtest_piplus_vertex.pdf’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_piplus_vertex.pdf’ ‘b1pi_standardtest_protons.pdf’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_protons.pdf’ ‘b1pi_standardtest_protons_phi.pdf’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_protons_phi.pdf’ ‘b1pi_standardtest_protons_theta.pdf’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_protons_theta.pdf’ ‘b1pi_standardtest_protons_vertex.pdf’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_protons_vertex.pdf’ ‘b1pi_standardtest_XMass.pdf’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_XMass.pdf’ ‘b1pi_standardtest_b1Mass.gif’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_b1Mass.gif’ ‘b1pi_standardtest_omegaMass.gif’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_omegaMass.gif’ ‘b1pi_standardtest_photons.gif’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_photons.gif’ ‘b1pi_standardtest_photons_phi.gif’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_photons_phi.gif’ ‘b1pi_standardtest_photons_theta.gif’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_photons_theta.gif’ ‘b1pi_standardtest_photons_theta_zoom.gif’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_photons_theta_zoom.gif’ ‘b1pi_standardtest_pi0Mass.gif’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_pi0Mass.gif’ ‘b1pi_standardtest_piminus.gif’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_piminus.gif’ ‘b1pi_standardtest_piminus_phi.gif’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_piminus_phi.gif’ ‘b1pi_standardtest_piminus_theta.gif’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_piminus_theta.gif’ ‘b1pi_standardtest_piminus_vertex.gif’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_piminus_vertex.gif’ ‘b1pi_standardtest_piplus.gif’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_piplus.gif’ ‘b1pi_standardtest_piplus_phi.gif’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_piplus_phi.gif’ ‘b1pi_standardtest_piplus_theta.gif’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_piplus_theta.gif’ ‘b1pi_standardtest_piplus_vertex.gif’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_piplus_vertex.gif’ ‘b1pi_standardtest_protons.gif’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_protons.gif’ ‘b1pi_standardtest_protons_phi.gif’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_protons_phi.gif’ ‘b1pi_standardtest_protons_theta.gif’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_protons_theta.gif’ ‘b1pi_standardtest_protons_vertex.gif’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_protons_vertex.gif’ ‘b1pi_standardtest_XMass.gif’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/b1pi_standardtest_XMass.gif’ ‘index.html’ -> ‘/group/halld/www/halldweb/html/b1pi/2020-01-02/Linux_RHEL7-x86_64-gcc4.8.5/Run30480/index.html’